Problem: From the point of view of the STEP format (and others), it is allowed
to describe a face on a surface with natural boundaries (torus, sphere) without
specifying these boundaries. Thus, a face on a closed surface and containing
an inner wire (or several) is correctly defined and describes a face with a
cutout defined by this wire. At the same time, there is a function
(ShapeFix_Face::FixOrientation) in the ShapeHealing procedure that corrects the
orientation of the wires, and it starts before the function of adding natural
boundaries (ShapeFix_Face::FixAddNaturalBound). There are many shapes that have
incorrectly oriented wires and this procedure successfully heals them, but on a
correctly specified face with single inner wire on closed surface, we do not get
the entire surface with a cutout, but a part of the surface defined by the wire.
This fix is intended to resolve this ambiguity.
Change:
1. Added function isNeedAddNaturalBound that returns TRUE if face needs to add
natural bounds.
2. Corrected condition in FixOrientation to ignoring faces that needs to add
natural bounds.
3. For tests in which one wire was incorrectly oriented on a closed surface,
flag AddNaturalBound was disabled.
5. Test with cutout from torus was created: bugs step bug28414.
Result: By default, it is correct to add natural boundaries, because this case
is correct from the point of view of the STEP format and others.
The "end" file from folder "de" has been corrected to exclude comparing the number of edges in the shapes from current result with test data.
"TODO messages generated for differences were removed.
Data exchange tests were regenerated.
Test parse rules are improved to recognize messages with word 'fail' or 'failure' as errors.
Test cases are corrected accordingly (TODO or REQUIRED statements added where fail messages were not noticed previously).
The usage of *BRepAlgo_Section* has been replaced with the usage of *BRepAlgoAPI_Section* in *BRepProj_Projection* algorithm.
The TODO statements have been removed from the failing test case in the "prj" grid as they are working correctly now.
The following changes have been made to improve the performance *BRepAlgoAPI_Section*:
1. Revision of the *IntPolyh_Intersection* class to avoid repeated calculation of the deflection of the same triangulation.
2. Small revision of the Edge/Face intersection algorithm to perform Extrema computation on the whole intersection range of the edge instead of discrete ranges.
3. Implementation of the extrema computation for the Circle and Sphere.
4. Correct computation of the parameter of the point on the Circle.
Upgrade check of closeness of 2dcurve to line during projection:
For C1 and more surfaces check distance to normal, not to surface, for C0 surfaces update tolerance formula.
Add check for possible period jump in some inner point.
Update some test cases.
Add cache saving for lines,
update fixPeriodicTroubles() function, using parameters from cashe.
Small correction of test cases for issue #26930
fix processing of points from cache.
Update of test cases according to the new behavior
Fix behavior of fixPeriodicityTroubles() on different isolines,
fix copy/paste mistake.
Update test cases:
iges_2 C4 - return to master values
step_3 E6 - improvement.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
Recalculate of tolerance before edge cutting
Test case for issue CR25013
add try to increase tolerance before splitting in singularity during PCurve adding.
Correction of test cases for issue CR25013
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
In cutting sphere it's seam edge was divided into two parts(by cylinder),
but pcurves of the second were not shifted during shape healing.
Test cases correction
Loop back tests for iges and step files with possibility of generation of reference data.
Clean up of test scripts (removal of obsolete code, adding comments, corrected formatting)
two fixes were done (same like bug 23722 and bug 23736)
Cancelling checking for number of warnings
rewrite some test scripts in cause of this and fix 23794
Tolerance checking was weakened.
Fix to check instability on Linux (bug 23822) was added.
TODO messages was added to tests which have different results on Windows and Mandriva2010
Ability to update this TODO in regeneration mode was added.
Add fix to bug 23852
Test groups were recomposed.
'dataexch' was renamed to 'de'.
CPU limit was decreased from 2000 sec. to 1500 sec.
