OpenGl_PrimitiveArray::Render() - removed obsolete code, which become redundant (and broken)
after moving rendering of transparent objects into OpenGl_LayerList::renderTransparent().
Test for 0025930: thickness of spherical cap is invalid
Test for 0025939: SIGSEGV in MakeThickSolid
Test for 0025940: MakeThickSolid creates C0 continuous edges
Test for 0026604: GeomFill_Pipe doesn't fit given bounds
Test for 0026655: ChFi3d_Builder algorithm fails to build fillets if some input edges connect with seam edges
Test for 0026697: BRepFeat_MakePrism returns empty compound
Test for 0026716: Mesher cannot create a mesh of brep model due to ShapeFix_Wire::FixShifted()
Test for 0026735: Adjacent perpendicular edges are detected as overlapped by DRAW command checkoverlap.
Test for 0026793: General Fuse algorithm produces incorrect result
Test for 0026795: Unable to perform General Fuse operation on the attached faces
Test for 0026842: bopsection result does not contain any edges.
Test for 0026882: Edge/Edge intersection algorithm produces incorrect result
Test for 0026883: Wrong result of Boolean Operation
Test for 0026889: Very poor mesh result from shape
Test for 0026928: Edges are meshed too coarsly
Test for 0026933: Section works unstably due to incorrect work of the method IsExistingPaveBlock
Test for 0026943: Wrong projection of helix on cylinder by ShapeConstruct_ProjectCurveOnSurface
Test for 0026957: Unify same domain operation is slow for multiple shells
Test for 0026978: Interactive selection is insensitive to swept shell
Test for 0027004: ShapeUpgrade_UnifySameDomain produces invalid result
Test for 0026280: Mechanism 'ShapeFix' is unable to heal a shape
Test for 0026282: Mechanism 'ShapeFix' has errors revealed by wire tool 'FixTails'
Test for 0026291: BRepMesh produces mesh with gap on the attached shape
Test for 0026382: BRepMesh produces internal nodes outside the face interior
Test for 0027453: Wrongly meshed surface
Test for 0027524: The command checkshape does not find the maximal deviation between curves representations
Test for 0026225: Wrong result of chamfer in case of coinciding bound of chamfer's surface with bound of a face
Test for 0026295: Sweep fails with BRepFill_ContactOnBorder
Test for 0026374: GeomFill_Profiler fails to unify BSplines if one has knot distance less than PConf
Test for 0026558: Failing to build isoline for offset surface
Test for 0026563: Boolean cut operation in new API multi-tool mode performs fuse instead of cut
Test for 0026568: Exception when creating pipe
Test for 0027419: Incorrect result of Edge/Face intersection
Test for 0027469: Regression vs 6.9.1: Wrong result of Edge/Face intersection
Test for 0027471: Wrong result of pipe
Test for 0027472: Wrong result of cut
Test for 0027614: Sewing returns result with too high tolerance
Test for 0026154: Visualization - v3d viewer grid disappears due to automatic z-fit
Test for 0026174: Loss of color after the second write of file (iges).
Test for 0023838: Standard_OutOfRange in Geom_OffsetSurface::LocalDN (called by BRepFill_PipeShell)
Test for 0023866: GccAna_Circ2d3Tan does not find a circle
Test for 0023925: BRepFeat_SplitShape produces invalid shape
Test for 0023942: Pipe algorithms unrobust to number rounding
Test for 0025385: steep increase in tolerance by intersection
Test for 0025395: SIGSEGV in BRepOffsetAPI_MakeThickSolid
Test for 0025458: can a sweep be used to create 1-fold tori (using a closed wire as path)
Test for 0025478: Fillets can not touch
Test for 0025481: Edge must not contain obsolete curve representations
Test for 0025515: Boolean operation become worse for unknown reason.
Test for 0025521: Fillet creates shell with bad orientation of SubShape
Test for 0025551: BRepMesh can produce internal nodes outside the face interior based on distorted BSpline surface
Test for 0025586: Poor mesh quality, or failure of meshing for closed extruded surfaces with holes
Test for 0025626: Loft of ellipses shows wrinkle near seam edge
Test for 0025628: BRepMesh fails to mesh face with open wire, considered as correct by checkshape
Test for 0025693: Wire of BSplines fails bopcheck
Test for 0025730: result of MakeThickSolid aborts the BOPCheck in Geom_OffsetSurface::SetD0
Test for 0025738: BRepMesh fails to produce correct mesh for the face
Test for 0025776: HLR returns intersecting edges in OutLineV of helical sweep
Test for 0025798: BRepFeat_SplitShape returns invalid result
Test for 0025817: crescent face is not meshed
Test for 0025827: BRepMesh does not synchronize parameters of glued vertices on small edges
Test for 0025837: Bad triangulation when IGES loaded in meters
Test for 0025852: Text to BRep algorithm produces bad faces for circled symbols
Test for 0025856: BRepOffsetAPI_ThruSections returns an invalid shape if one wire contains degenerated edges
Test for 0025879: result of blend fails the bopcheck
Test for 0025967: Shape Healing fails to correct a face with missing poles and pcurves
Test for 0026052: Missing pcurves are computed incorrectly on two connected faces laying on the same surface
Test for 0025061: BRepMesh should skip internal wires with self intersections to produce mesh for the shape anyway
Test for 0024490: Computed surface properties differ substantially depending on NaturalRestriction flag
Test for 0024568: Split shape produces an invalid result
Test for 0024692: fuseedge corruption of spherical edge
Test for 0024772: Intersection of cylinder and cone produces incorrect results
Test for 0024954: BRepBuilderAPI_MakeFace adds wire with aribitary orientation
Test for 0025104: Prism from BSpline curve can not be chamfered
Test for 0025206: Fillet creates edge with C0 continuity
Test for 0025979: fillet creates faces with non-closed wires
Test for 0025983: Fusion of sweep and its mirror invalid
Test for 0025994: Boolean fuse result in invalid result.
Test for 0026034: Result of revolution aborts the bopcheck if translated
Test for 0026077: nurbsconvert of psphere fails the bopargcheck
Test for 0025989: toridial surface gets damaged in STEP export
AIS_Shape and AIS_ColoredShape now computes Shaded presentation
with UV coordinates if texture mapping is enabled in Drawer.
OpenGl_Context::SetTextureMatrix() - fixed inconsistent handling
of texture cooridnates translation vector.
vtexture command has been extended to handle new arguments:
* -trsfTrans, -trsfScale, -trsfAngle defining transformation matrix
* -setFilter, -setAnisoFilter to setup texture filtering
V3d_View::SetComputedMode() - removed implicit View update.
Graphic3d_CView::SetComputedMode(), ::ReCompute() - fixed
uninitialized bounding box of Computed structure.
PrsMgr_Presentation::Compute() - fixed computation of Computed structure
with transformation within Connected presentation.
StdPrs_HLRPolyShape::Add() now creates Graphic3d_ArrayOfSegments instead of
inefficient Graphic3d_ArrayOfPolylines with boundaries at every segment.
Fixed error in test case bugs/vis/bug24388_1.
DeviceLost flag has been moved from Graphic3d_GraphicDriver to Graphic3d_StructureManager,
so that all Viewers sharing the same Driver instance are properly invalidated.
Fixed clearing of objects by vclear command in case of multiple Viewers.
TopAbs::ShapeTypeToString() is now used instead of duplicating TopAbs_ShapeEnum printing code.
vselmode now accepts shape type string for activating standard AIS_Shape selection modes.
A new Shaded presentation flag configured through Datum aspect (NOT as usual Display Mode).
Creation of auxiliary Axis/Point/Plane presentations in Trihedron presentation is removed.
'vtrihedron' DRAW command to change parameters of trihedron is extended to cover whole functionality of AIS_Trihedron.
The following classes are redesignede:
AIS_Trihedron,
Prs3d_DatumAspect.
The followin enumermations are created to manage properties of trihedron:
Prs3d_DatumAttribute,
Prs3d/Prs3d_DatumAxes,
Prs3d_DatumMode
1. The packages *QANewModTopOpe*, *QANewBRepNaming* and *QANewDBRepNaming* have been removed as containing obsolete features.
The corresponding QA commands (such as OCC252, OCC307 and OCC294) and test cases have also been removed.
2. The QA command buc60609 has been removed. The corresponding test case bugs/moddata_1/buc60609 has been rewritten using b2dclassify command.
The patch fixes transformation persistence for various set of GCC compilers.
1) Optimized template-specialized operator /= for division (causes bugs)
of NCollection_Vec4 was replaced with non-specialized version.
2) NCollection_Vec4::xyz() is not used since compiler uses modifiable-reference
returning version, which invokes warning of possible strict-aliasing rules
violation and leads to incorrect behavior of the reference.
AIS_InteractiveContext::Remove (anIObj, ...) removes object from sequence of detected owners.
Therefore further iteration on detected will not require updating this list with ::MoveTo().
Additional modification includes incrementing properly the iterator of CurrentDetectedObject
and resets iterator of Highlighted detected objects, because nothing is really highlighted after that.
Cosmetics, code clean up.
AIS_ColorScale now draw labels using Graphic3d_VTA_CENTER
vertical alignment flag, instead of incorrect own alignment logic.
The color bar now adds margin on the top simmetrical to the bottom.
AIS_ColorScale::SetSmoothTransition() - added new property
for displaying colorscale with smooth transition between color intervals.
AIS_ColorScale::SetHueRange() - added new property defining the hue angles
corresponding to minimal and maximum values on the color scale.
AIS_ColorScale::SetLabels() now allows setting the sequence of free labels,
which number does not match the number of intervals.
In this case the labels will be displayed at positions of virtual
intervals corresponding to the number of labels.
AIS_InteractiveContext - removed the following unused properties:
- PreSelectionColor(), DefaultColor(), WasCurrentTouched(), ZDetection().
AIS_InteractiveObject - removed unused property SelectionPriority().
Prs3d_Drawer - removed properties HighlightStyle() and SelectionStyle().
Graphic3d_HighlightStyle has been superseded by Prs3d_Drawer
inheriting from new class Graphic3d_PresentationAttributes.
Graphic3d_PresentationAttributes (as Graphic3d_HighlightStyle replacement)
has been extended with new properties:
- ZLayer() defining Z-Layer for highlighting presentation.
- DisplayMode() defining display mode for highlighting.
StdSelect_BRepSelectionTool methods have been corrected to take
SelectMgr_EntityOwner instead of StdSelect_BRepOwner.
StdSelect_Shape - duplicated field myDrawer has been dropped.
AIS_InteractiveObject - myDrawer->Color() is now used instead of myOwnColor,
myDrawer->Transparency() instead of myTransparency
and myDrawer->ZLayer() instead of myZLayer.
PrsMgr_PresentationManager::Unhighlight() now unhighlight all modes.
The method taking Mode as argument has been marked deprecated.
New enumeration Prs3d_TypeOfHighlight has been introduced
defining different highlight types.
AIS_InteractiveObject::HighlightStyle() now takes enumeration argument
and defines different styles for Global and Local selection.
ComesFromDecomposition() property has been moved
from StdSelect_BRepOwner to SelectMgr_EntityOwner.
- class Graphic3d_HatchStyle is added to provide a possibility to set up custom and predefined hatching;
- added the ability to set custom hatch patterns through bitmaps;
- test case for issue #28107
OpenGl_LayerList::Render() now calls glDepthMask(GL_TRUE) before clearing depth buffer.
Depth buffer is now cleared even if ZLayer with this command has no structures.
The algorithm BRepExtrema_DistShapeShape has been protected against exceptions when non-geometric shape data is given on input, like a face containing triangulation only or an edge containing polygon only. Such faces/edges are ignored by the algorithm.
BRepGProps::VolumeProperties() now ignores faces without geometric surface to avoid access violation.
OpenGl_Workspace::BufferDump() now implicitly converts RGBA dump
into requested BGR, BGRA and RGB image.
DRAW command dversion is improved to report OpenGL variant used (desktop or ES); reporting of version of MSVC is corrected for VC14 and above; reporting of HAVE_OPENCL option is removed.
Usage of command vdump is corrected in some tests to specify extension .png for an image file.
Compiler warning is eliminated in OpenGl_Text.cxx (OpenGL ES mode only).
- added implementation of mentioned methods for neutral point;
- sequence of detected objects was replaced by sequence of detected owner's indexes in AIS_InteractiveContext;
- commands vselnext and vselprev were corrected to update viewer properly;
- test case for issue #27530.
BRepGProps now ignores faces without geometric surface to avoid access violation.
BRepExtrema_DistShapeShape::DistanceMapMap() now skips comparison between void bounding boxes.
BRepBndLib::Add() now ignores useTriangulation flag for faces without geometric surfaces, and uses triangulation if any for updating of the box.
Added classes AIS_Animation, AIS_AnimationCamera, AIS_AnimationObjectLocatio.
Draw Harness command vanimation has been modified to manage animation timeline.
Command vfit has been extended with option -noupdate.
Formatting of vviewparams command output has been improved.
Functionality of commands vlocreset, vlocmove, vloctranslate, vlocrotate,
vlocmirror, vlocscale has been merged into vlocation/vsetlocation.
vlocation now can print the current local transformation of the object.
v3d/ivtk test group does not call vfit anymore.
Fixed misprint in test cases bugs/vis/bug24623_3 and bug25532.
Implementation of custom text in dimension presentation;
Test case is provided for this bug;
Code correction: Standard_EXPORT is removed for inline method.
Minor correction of test case bugs/vis/bug27688
Graphic3d_ZLayerSettings - public fields have been replaced by methods.
Added new property Origin defining local coordinate system for all Layer objects.
Syntax of Draw Harness command VZLayer has been redesigned.
Graphic3d_CStructure now stores bounding box with double precision floats.
OpenGl_BVHTreeSelector - frustum culling now works with double precision floats.
Not implemented method V3d_View::TriedronEcho() and enum Aspect_TypeOfTriedronEcho have been removed.
The following methods have been removed from Graphic3d_CView class:
TriedronDisplay(), TriedronErase(), ZBufferTriedronSetup(), TriedronEcho().
New class V3d_Trihedron has been added as replacement of removed OpenGl_Trihedron
which now uses Graphic3d_TMF_TriedronPers persistence.
AIS_InteractiveContext methods adding object to the context now throws Standard_ProgramError exception
if object has been already displayed in another context.
AIS_InteractiveContext::Remove() now NULLifies context assigned to the object.
AIS_InteractiveContext now inherits from Standard_Transient instead of deprecated MMgt_TShared
and defines C++ destructor instead of method Delete().
AIS_InteractiveObject - undocumented property State() has been removed.
Undocumented property Users() has been moved to AIS_IdenticRelation.
Draw Harness command vclose now clear AIS_InteractiveContext content
before nullifying it to ensure that objects have been properly removed.
AIS_MultipleConnectedInteractive now overrides method ::SetContext()
to assign context for children objects.
OpenGl_Structure::Render() and SelectMgr_ViewerSelector::checkOverlap()
now clip entire zoom/rotate persistence object
by checking anchor point with global clipping planes.
Image dump has been added to the new test case.
Added DRAW command dsetsignal, resetting OSD signal handler with either armed or disabled FPE handler, according to an option.
If called without arguments, it sets FPE handler only if environment variable OSD_FPE is defined (with value different from 0).
On start, DRAW calls dsetsignal to set FPE signal if CSF_FPE is defined.
Test bugs fclasses bug6143 uses dsetsignal to set FPE handler unconditionally before the test command, and resets it to default at the end.
A number of changes in the code have been done in order to fix floating point exceptions that became generated after enabling signals:
- Global functions Sinh() and Cosh() defined in Standard_Real.hxx are improved to raise Standard_NumericError exception if argument is too big (greater than 710.47586), instead of relying on system treatment of floating point overflow. These functions are used instead of sinh and cosh in ElCLib.cxx.
- Maximal value of parameter on hyperbola is restricted by 23 (corresponding to ~1e10 in 3d) in order to avoid FP overflow in Extrema_GenExtCS.cxx, ShapeFix_EdgeProjAux.cxx.
- Interface of the root curve adaptor class Adaptor3d_Curve has been updated to add new virtual methods BasisCurve and OffsetValue. They complement the adaptor for the case of offset curves. These methods are used in Extrema_GenExtCS.cxx to restrict domain search in the case of offset of hyperbola, in order to get rid of floating point overflow. All classes inheriting Adaptor3d_Curve have been changed to implement the new virtual methods.
- Protection against division by zero has been implemented in ApproxInt_KnotTools.cxx, BRepClass3d_SClassifier.cxx, BRepGProp_Face.cxx, BRepMesh_FastDiscretFace.cxx, Geom2dGcc_Circ2d2TanOnIter.cxx, Geom2dInt_Geom2dCurveTool.cxx, IntPolyh_MaillageAffinage.cxx.
- Protection against calling of math functions of infinite arguments has been added in BRepCheck_Edge.cxx, BRepLib.cxx, CSLib_NormalPolyDef.cxx, Extrema_FuncExtPC.gxx, Extrema_GExtPC.gxx, Extrema_GLocateExtPC.gxx, Intf_InterferencePolygonPolyhedron.gxx, ShapeAnalysis_Surface.cxx, ShapeAnalysis_TransferParametersProj.cxx, ShapeAnalysis_Wire.cxx, math_FunctionSetRoot.cxx.
- Proper initialization of local variables is done in BOPAlgo_PaveFiller_6.cxx, XSDRAWSTLVRML.cxx.
- Inconsistent usage of Standard_Boolean* to access integer data in HLR (caused by #27772) is corrected
Some test cases have been updated to actual state.
- misprint in check of global selection existence in AIS_InteractiveContext::SetSelected was corrected;
- remaining occurrencies of hard-coded 0 selection mode were corrected to use global selection mode;
- test case for issue #27983
- introduces a wrapper for setting up highlight properties: Graphic3d_HighlightStyle;
- API of all methods that use highlight or selection color is changed to deal with Graphic3d_HighlightStyle;
- highlight in shading mode now supports transparency, implemented via blending;
- transparency for selection can also be set, but implementing custom entity owners with additional presentation on application level;
- methods PrsMgr_PresentationManager::Highlight, PrsMgr_PresentationManager::BoundBox that highlight object with hard-coded color are removed;
- deprecated methods of SelectMgr_EntityOwner, that use presentation manager's highlight method, were removed;
- methods of IsHilighted AIS context with selection color checks were replaced;
- added API to store dynamic and selection highlight to Prs3d_Drawer class;
- customization of dynamic and selection highlight for particular objects is now available through SelectMgr_SelectableObject::HilightAttributes();
- AIS_InteractiveContext highlight methods were updated to support individual highlight styles of interactive objects;
- introduced new command - vselprops, that allows to customize global selection and highlight properties like autoactivation, pixel tolerance and colors;
- Draw Harness commands vautoactivatesel and vselprecision were removed, use vselprops instead;
- fixed bug in command's parser;
- test case for issue #27818
This commit provides useful functionality for path tracing rendering core.
1) Graphic3d_RenderingParams class was extended with additional AdaptiveScreenSampling option (disabled by default).
If this option is enabled, path tracing tries to adjust the number of samples for different screen areas.
In this way, the more complex areas (from the point of light conditions) are sampled more intensively,
while the simple areas are sampled very rarely.
For example, caustics and glossy reflections are typical candidates for more precise sampling.
In general, this allows to equalize image convergence and not to waste resources for already converged areas.
It is also possible to visualize sampling densities by enabling ShowSamplingTiles option
(activating and deactivating this option does not affect on the accumulated image).
2) Mixing OpenGL and ray-tracing output has been changed.
Now blending is performed using OpenGL functionality, while ray-tracing shaders only output correct Z-value.
Test case bugs vis bug27083 has been updated,
since the alpha value is now correctly set by Ray-Tracing to 1, opaque.
Graphic3d_Camera::TransformMatrices redundant NCollection_Handle usage
has been replaced with validity flags.
Graphic3d_TransModeFlags now defined as enumeration, not integer bit flags.
Graphic3d_TMF_PanPers and Graphic3d_TMF_FullPers have been removed.
Graphic3d_TMF_ZoomRotatePers has been introduced.
Graphic3d_TransformPers is now inherits Standard_Transient.
Graphic3d_TransformPers now defines dedicated constructors
for 3D persistence (zoom / rotate) and 2D persistence (2d / trihedron).
2D persistence now supports dedicated values for X and Y offsets.
The corner is now specified by enumeration Aspect_TypeOfTriedronPosition
instead of indirect interpretation of anchor point values.
Fixed handling of Graphic3d_TMF_ZoomRotatePers (combination of Graphic3d_TMF_RotatePers + Graphic3d_TMF_ZoomPers).
PrsMgr_PresentableObject, Graphic3d_CStructure now hold
Handle(Graphic3d_TransformPers) instead of a value.
Method ::SetTransformPersistence(), ::TransformPersistence()
now works with Handle(Graphic3d_TransformPers).
Old methods have been marked deprecated.
Low-level selection algorithms has been improved to explicitly support 2D
transformation persistent objects. This patch generally touches:
1) SelectMgr_SelectableObjectSet - the lists of objects has been split onto three
subsets (regular, 3d-persistent, 2d-persistent). Each subset has individual BVH
tree. The algorithms are now have more flexibility to update only those trees
that is really required for actual camera state.
2) SelectMgr_ViewerSelector - explicitly supports Eye space selection operations
on BVH tree for 2d-persistent subset. Change of camera position does not
anymore affect acceleration data structure (BVH tree) of 2d-persistent selectable objects.
3) Other classes from SelectMgr have been fine-tuned to provide appropriate API.
Porting notes:
This patch touches very low-level selection classes. If the low-level features were used
the following modifications may need to be considered for porting:
1) Iteration over objects of SelectMgr_SelectableObjectSet should now
be implemented with corresponding Iterator class.
2) SelectMgr_BaseFrustum::ScaleAndTransform and derived classes return
Handle(SelectMgr_BaseFrustum) instead of NCollection_Handle<> type.
Small correction of test case for issue CR27739
