Boolean Operations - when checking two faces with the same bounds on Same Domain, take into account possible deviation of the edges from the faces surfaces.
Test cases for the issue.
Usage of Bnd_Box-filtering is eliminated while putting a (definitely) common vertex between two faces on the intersection curve.
Algorithm of putting not-common (ON/IN) vertices has not been changed.
1. The package BOPCol has been fully removed:
- *BOPCol_BaseAllocator* is replaced with *Handle(NCollection_BaseAllocator)*;
- *BOPCol_BoxBndTree* is replaced with *BOPTools_BoxBndTree*;
- *BOPCol_Box2DBndTree* is removed as unused;
- *BOPCol_DataMapOfIntegerInteger* is replaced with *TColStd_DataMapOfIntegerInteger*;
- *BOPCol_DataMapOfIntegerListOfInteger* is replaced with *TColStd_DataMapOfIntegerListOfInteger*;
- *BOPCol_DataMapOfIntegerListOfShape* is replaced with *TopTools_DataMapOfIntegerListOfShape*;
- *BOPCol_DataMapOfIntegerMapOfInteger.hxx* is removed as unused;
- *BOPCol_DataMapOfIntegerReal* is replaced with *TColStd_DataMapOfIntegerReal*;
- *BOPCol_DataMapOfIntegerShape* is replaced with *TopTools_DataMapOfIntegerShape*;
- *BOPCol_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
- *BOPCol_DataMapOfShapeInteger* is replaced with *TopTools_DataMapOfShapeInteger*;
- *BOPCol_DataMapOfShapeListOfShape* is replaced with *TopTools_DataMapOfShapeListOfShape*;
- *BOPCol_DataMapOfShapeReal* is replaced with *TopTools_DataMapOfShapeReal*;
- *BOPCol_DataMapOfShapeShape* is replaced with *TopTools_DataMapOfShapeShape*;
- *BOPCol_DataMapOfTransientAddress* is removed as unused;
- *BOPCol_IndexedDataMapOfIntegerListOfInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeBox* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeListOfShape* is replaced with *TopTools_IndexedDataMapOfShapeListOfShape*;
- *BOPCol_IndexedDataMapOfShapeReal* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeShape* is replaced with *TopTools_IndexedDataMapOfShapeShape*;
- *BOPCol_IndexedMapOfInteger* is replaced with *TColStd_IndexedMapOfInteger*;
- *BOPCol_IndexedMapOfOrientedShape* is replaced with *TopTools_IndexedMapOfOrientedShape*;
- *BOPCol_IndexedMapOfShape* is replaced with *TopTools_IndexedMapOfShape*;
- *BOPCol_ListOfInteger* is replaced with *TColStd_ListOfInteger*;
- *BOPCol_ListOfListOfShape* is replaced with *TopTools_ListOfListOfShape*;
- *BOPCol_ListOfShape* is replaced with *TopTools_ListOfShape*;
- *BOPCol_MapOfInteger* is replaced with *TColStd_MapOfInteger*;
- *BOPCol_MapOfOrientedShape* is replaced with *TopTools_MapOfOrientedShape*;
- *BOPCol_MapOfShape* is replaced with *TopTools_MapOfShape*;
- *BOPCol_PListOfInteger* is removed as unused;
- *BOPCol_PInteger* is removed as unused
- *BOPCol_SequenceOfPnt2d* is replaced with *TColgp_SequenceOfPnt2d*;
- *BOPCol_SequenceOfReal* is replaced with *TColStd_SequenceOfReal*;
- *BOPCol_SequenceOfShape* is replaced with *TopTools_SequenceOfShape*;
- *BOPCol_Parallel* is replaced with *BOPTools_Parallel*;
- *BOPCol_NCVector* is replaced with *NCollection_Vector*;
2. The class *BOPDS_PassKey* and containers for it have been removed as unused;
3. The unused containers from *IntTools* package have been removed:
- *IntTools_DataMapOfShapeAddress* is removed as unused;
- *IntTools_IndexedDataMapOfTransientAddress* is removed as unused;
4. The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
5. The class *BOPTools* has been removed as duplicate of the class *TopExp*;
In order to improve performance of Boolean Operations on the relatively fast cases the following improvements have been made:
1. Initialization of the FaceInfo information for the faces participating in Face/Face interference, even when the gluing is ON, to take into account intersection of their sub-shapes.
2. Code simplification & duplication removal - the methods BOPAlgo_ShellSplitter::MakeConnexityBlocks and BOPAlgo_WireSplitter::MakeConnexityBlocks have been unified into BOPTools_AlgoTools::MakeConnexityBlocks.
3. Avoid unnecessary bounding box computation for solids during DS initialization. The bounding boxes for solids will be computed during the building stage to find faces located inside solids.
For the shape self-interference check (performed by the BOPAlgo_CheckerSI), the bounding box is still computed, as it is necessary to resolve Shape/Solid intersections.
4. Use only three sample points to check coincidence of line and plane.
5. Perform necessity of planes intersection only when the gluing is off.
6. Avoid repeated initialization of 2D classifier while building splits of the faces.
7. Post treat stage:
7.1. Method CorrectWires: Save edge's data (PCurve, parameter of the vertex, range) to avoid its recalculation.
7.2. Method CheckEdge: While checking vertices on edges avoid unnecessary calculation of their location.
8. Provide possibility to disable the classification of the input solids on the inverted status (to be the holes in the space).
9. Avoid building of bounding boxes for faces/solids during splitting of the input arguments for their classification relatively hole faces/shells if there are no holes created.
10. Avoid rebuilding of the faces/solids from arguments which does not acquire any inside parts from other arguments during the operation by using their draft versions as their splits.
Test cases for the issue.
Correction of the test cases boolean gdml_public A9 and bugs modalg_7 bug28485 as they are improvements.
Additional test case for the issue #28485 as it is fixed by the current changes.
Make possibility to dramatically increase the step during iteration on the curve when the global resolution of the curve is too small.
Correct the functions FindParameters, FindBestSolution, FindDistPC.
The change caused improvement of the test case "boolean bfuse_complex E4", so the bug #27697 has been fixed.
The change caused dramatic improvement of the performance of the test "bugs modalg_7 bug27160", and the bug #29080 has been fixed.
The methods BOPAlgo_Tools::MakeBlocksCnx(), BOPAlgo_Tools::MakeBlocks() and static method MakeBlocksCnx in BOPAlgo_Builder_2.cxx have been replaced with the new template method BOPAlgo_Tools::MakeBlocks(). The blocks of connected elements are now stored into the list of list instead of data map.
All methods BOPAlgo_Tools::FillMap() have been replaced with the new template method BOPAlgo_Tools::FillMap().
Making the Pave Block with the smallest index of original edge to be the first in the Common Block (i.e. the representing Pave Block).
The following improvements have been made in Boolean Operations algorithm to avoid regressions:
- When updating the existing common block update its pave blocks in a way that the parameters of the paves should be valid for the original edge (bugs/modalg_5/bug24809);
- When trying to reduce the tolerance of the section edge check the tolerance of all Face/Face interferences that created this edge (boolean/volumemaker/C4,D2);
- Avoid producing the different Pave Blocks for the same section edge (boolean/volumemaker/D6);
Adjustment of the test cases.
1. Re-orienting the shell before making solid from it (MakeShell in BOPAlgo_ShellSplitter);
2. The implementation of the BOPTools_AlgoTools::IsSplitToReverse() method has been changed to
make the usage of the Hatcher for looking for the point in the face default.
3. Test cases for the issue.
1. The static method Standard_Real MinStep3D(...) in the class BOPTools_AlgoTools is
now checks if the computed 3D step is too big (relatively UV range of the faces)
for any of the faces.
2. The method PointInFace(...) of the class BOPTools_AlgoTools3D has been redesigned.
The new PointInFace(...) methods have been implemented to add possibility for looking the point
inside the face in necessary direction and distance from the edge of the face.
Note: old implementation is also functional.
3. Make methods for finding points near edges and computing normal directions on faces
return error status (0 in case of success).
4. Test case for the issue.
5. Test cases offset shape_type_i_c XJ2,XJ4,XJ5,XJ6 are improvements.
Removing useless file
1. The result of Boolean operation on the arguments of collection type, containers WIRE/SHELL/COMPSOLID, is also a collection.
The containers of type WIRE included into result should now also (as the SHELLs) have coherent orientation of its sub-shapes.
For that the new method has been implemented (BOPTools_AlgoTools::OrientEdgesOnWire(TopoDS_Shape&)) which reorients edges for correct ordering.
The duplicating containers, i.e. containers with the contents completely included in other containers, are now avoided in the result of BOP.
2. The result of Fuse operation on Compsolids is now also will be Compsolid.
3. Documentation has been updated.
4. New test cases for the issue.
5. Adjusting test cases to current behavior.
Correction of test case bugs/modalg_4/bug726_2 according to the new behavior
1. Unification of the usage of the BRepAdaptor_Surface in Boolean Operations algorithm.
For each face when it is necessary the Adaptor is initialized only once and stored in Context.
For that purpose the new IntTools_Context::SurfaceAdaptor(const TopoDS_Face&) method has been implemented.
To provide possibility to take the Adaptor from the context, the context has been added as
a parameter in following methods:
BOPTools_AlgoTools::MakePCurve()
BOPTools_AlgoTools::Sence()
BOPTools_AlgoTools2D::BuildPCurveForEdgeOnFace()
BOPTools_AlgoTools2D::PointOnSurface
BOPTools_AlgoTools2D::CurveOnSurface
BOPTools_AlgoTools2D::AdjustPCurveOnFace
BOPTools_AlgoTools2D::Make2D
BOPTools_AlgoTools2D::MakePCurveOnFace
BOPTools_AlgoTools3D::GetNormalToFaceOnEdge
It is also possible now to pass the context into BOPAlgo_WireSplitter algorithm.
Also, the new IntTools_Context::UVBounds(const TopoDS_Face&) method
has been implemented to get the UV bounds of a face.
2. Additional improvement is a calculation of reduced intersection range only for the intersection
type VERTEX during computation of Edge/Face interference.
3. The methods IntTools_EdgeFace::Prepare() and IntTools_EdgeFace::FindProjectableRoot()
and the fields IntTools_EdgeFace::myProjectableRanges and IntTools_EdgeFace::myFClass2d
have been removed as obsolete.
4. Test cases for the issue.
When fuzzy option is in force prevent increasing tolerance of input shapes. Instead pass increased by fuzzy value the tolerances of sub-shapes everywhere where it is needed by intersection algorithms.
The following changes in API have been made:
- The methods SetFuzzyValue and FuzzyValue have been moved from the classes BOPAlgo_ArgumentAnalyzer, BOPAlgo_Builder, and BOPAlgo_PaveFiller to the base class BOPAlgo_Algo.
- The public method BOPDS_DS::VerticesOnIn has been renamed to SubShapesOnIn, and the new output parameter theCommonPB has been added.
- In BOPTools_AlgoTools, a new argument "theFuzzyValue" has been added in the methods ComputeVV and AreFacesSameDomain.
- In IntTools_Context, a new argument "theFuzzyValue" has been added in the methods ComputeVE and ComputeVF.
- The methods SetFuzzyValue and FuzzyValue have been added in the classes IntTools_EdgeEdge, IntTools_FaceFace.
- In the class IntTools_EdgeFace, the methods SetTolE, SetTolF, TolE, TolF have been removed, and the methods SetFuzzyValue, FuzzyValue have been added.
- The new argument "theTol" has been added in the method IntTools_WLineTool::DecompositionOfWLine.
Some improvements in algorithms have been made during fighting with regressions:
- Correct initialization of pave blocks for degenerated edges.
- In BOPAlgo_PaveFiller::MakeBlocks(), filter out paves on intersection curve that were put on the curve accidentally due to wide range of E-F intersection vertex.
- In the method IntTools_Tools::ComputeTolerance the margin added to the computed tolerance has been increased up to 0.001%.
- The method BOPAlgo_PaveFiller::PutPaveOnCurve has been corrected in order to use the original vertex tolerance instead of the value increased during putting it on other curves.
- The new method BOPDS_PaveBlock::RemoveExtPave has been added.
- The vertex tolerance computation in BOPTools_AlgoTools::CorrectCurveOnSurface has been improved, taking into account intersection segments between p-curves (to avoid regression on "bugs modalg_6 bug22794").
- Improve IsExistingPaveBlock to make more stable catching of coincidence of common block with section curve (against regression "bugs modalg_4 bug697_2" on Linux).
Test case for the bug has been added.
The following test cases have been updated as improvements:
boolean gdml_private ZH2 ZI7 ZJ7
boolean volumemaker C4
The test case bugs/modalg_4/pro19653 has been corrected to make it stable. See comment inside the script for details.
The test case bugs/modalg_6/bug25880 has been corrected to suppress wrong bfuse commands.
The test bugs/modalg_6/bug26954_3 has been corrected to compare the result with more precise reference value.
The "faulty" TODO in boolean/volumemaker/A8 has been made actual for Linux as well.
//Eliminate compilation error on Linux.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
1) BRepBuilderAPI_MakeWire::Add (const TopTools_ListOfShape &L) method have been completely rewritten. The order of edges is not significant now.
2) The geometric proximity of free vertices from already existing wire and from input list of edges are also have been taken into account. If such vertices are coincident with each other then they are fused into the one. The original wire remains untouched topologically (yet the tolerances and points can be modified).
3) UBTreeFiller is used to speed up the process of picking of coincident vertices.
4) BRepLib now contains the 'new' method - BoundingVertex(..). The implemenation of this method are taken from BOPTools_AlgoTools::MakeVertex(..).
5) The '-unsorted' argument have been added to 'wire' command.
Conflicts:
src/QABugs/QABugs_20.cxx
Add missing include.
Eliminate warning.
1. IntTools_ShrunkRange::Perform
The algorithm of building shrunk range on the edge has been redesigned to make this range as big as possible.
By new definition it has to have the length not less than Precision::Confusion().
Although, the possibility of splitting of the edge has been taken into account. If it is impossible to put
vertex on edge in such a way that the tolerance spheres of the edge's vertices do not intersect the tolerance
sphere of the putting vertex the edge cannot be split. This possibility is saved in the new field
IntTools_ShrunkRange::myIsSplittable. It can be checked by the corresponding method IntTools_ShrunkRange::IsSplittable().
It returns TRUE if the shrunk range is computed successfully and it has the length more than the value of sum of two tolerance
values of the edge (for putting vertex, as its tolerance should not be less than the tolerance value of edge) and
two Precision::Confusion() values (to make two new edges valid by Shape validity criteria).
IntTools_ShrunkRange::myErrorStatus and IntTools_ShrunkRange::ErrorStatus() have been replaced by
the IntTools_ShrunkRange::myIsDone and IntTools_ShrunkRange::IsDone(). IntTools_ShrunkRange::IsDone() returns TRUE
if the shrunk range has been computed and it has length more than Precision::Confusion().
All computations of the parameters are performed using the GCPnts_AbscissaPoint, but if AbscissaPoint is unable to
compute the parameters the Resolution of the curve is used.
2. Boolean Operations algorithm now partially works with the edges that cannot be split or does not have the ShrunkData
at all (previously such edges have been considered as micro and just ignored). If by the result of some intersection such
edges should be split, i.e. the intersection vertex should be created, the algorithm just ignores them and no vertex is created.
But if such edges coincide with other shapes (other edges or faces) the algorithm uses them for creation of common blocks.
The information of the possibility for the edges to be split is saved in its PaveBlocks, in the new BOPDS_PaveBlock::myIsSplittable field.
It can be retrieved by the BOPDS_PaveBlock::IsSplittable() or BOPDS_PaveBlock::ShrunkData(), but these methods
make sense only after filling of the shrunk data for the pave block.
BOPTools_AlgoTools::IsMicroEdge() has an additional parameter that defines whether it is necessary to take into account
the possibility for the edge to be split or not. By default it is set to TRUE, i.e. by default the edge will be considered as micro
even if the shrunk range is computed, but it is too short for the edge to be split.
3. BOPAlgo_PaveFiller::PerformEF
To avoid creation of too close intersection vertices the intersection ranges of the edges participating in Edge/Face
intersections are reduced taking into account the common ranges computed during Edge/Edge intersections.
Thus, the Edge/Face intersection vertex is not created if it gets into a common range of the Edge/Edge intersection
between that edge and one of the face's edges. The tolerance value of Edge/Edge intersection vertex is increased
to reach the Edge/Face intersection.
4. Unification of the vertices of the section edges considered as micro edges.
If by the result of some Face/Face intersection the section edge is considered as micro edge,
the vertices of this edge will be united and the edge itself will be removed.
5. Test cases for the issues.
6. Adjusting test cases for issue CR27448.
Calculating the offset vertices by the superposition of intersection vertices
between pairs of edges (BRepOffset_Inter2d::FuseVertices()).
To obtain stable result when calculating the superposition of vertices
they are sorted (BOPTools_AlgoTools::MakeVertex()).
The support of vertices has been added in nexplode command.
Small correction of tests cases for issue CR27540
0026796: The result of General Fuse operation is self-intersecting shape
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Various bug fixes in the algorithm:
- Compute correct tolerance values for intersections of type Line/Line, Line/Plane, Plane/Plane.
- In case of Line/Plane intersection check if line's vertices lie on the plane.
- Do not allow decreasing of the tolerance value of the Line/Line intersection vertex.
- In IntTools_EdgeEdge, call the method FindParameters with proper 3D tolerance of the curve.
- Force making copy of a degenerated edge if its vertex is touched but no 2D intersection with other curves is found.
- Remove pave blocks both ends of which became referring to the same vertex after vertices substitution.
- Avoid exception in IntTools_Context::IsVertexOnLine if Extrema is not done.
- Reduce tolerance of vertex/edge using actual distances to interfered shapes if it was increased due to line/line, line/plane, or plane/plane small intersection angle.
- Update tolerance of edges to reach all representations in a common block.
- In V-E intersections, check if a vertex hits beyond shrunk range, in such case create V-V interference.
- Do not put a section edge to the result if it becomes to be a micro edge after updating its vertex.
- Correctly make vertices same-domain during the work of MakeBlocks.
- Decrease shrunk range at least on a Precision::Confusion() in addition to vertex tolerance.
- Add Confusion to bounding boxes of new shapes in DS
- Add tolerance Precision::Confusion() to compare distances of touching cases to fix regressions.
TODO marks have been removed from (or modified in) the following test cases (Improvements):
boolean bsection M3 N2 R2
boolean gdml_private B6 C2 C6 G7 I6 F6 J1 J4 M7 N1 N8 N9 O3 O4 O6 O8 O9 P1 P2 P5 Q1 Q3 Q5 S9 T2 U4 U5 U9 ZB5 ZB6 ZC1 ZC5 ZD3 ZD6 ZD7 ZH2 ZH5 ZI2 ZI5 ZI7 ZI9 ZJ3 ZJ4 ZJ7 F8 I6 G1
boolean volumemaker A5 A6 B3 B4 B7 B9 D3 D4 D7 F1
boolean bopcut_2d D5
bugs modalg_5 bug25043
bugs modalg_2 bug472_1 bug472_2 bug472_3
Test cases updated because they are still bad but can be accepted as non-regression:
boolean volumemaker C4 A3 A7 E6
bugs modalg_1 bug10232
boolean bsection N2
Put new TODO in the scripts:
bugs modalg_5 bug25232_9
bugs modalg_6 bug26619
bugs modalg_1 buc60462_2
bugs modalg_4 bug772
For the following tests the result in fix became better, so take fix result as the reference:
bugs modalg_5 bug24628
bugs modalg_6 bug26954_3
boolean volumemaker A4 B5 B6 C3 C8 D2 D5 F2
bugs modalg_2 bug472_2
bugs modalg_1 buc60776_1
- Add the method SetNonDestructive to API classes of user level
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
New features:
class BOPTools_AlgoTools2D
method:
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aEold,
const TopoDS_Edge& aEnew,
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
has been added.
Purpose:
To attach P-Curve on surface of the face <aF> from the edge <aEold>
to the edge <aEnew>
It returns 0 in case of success.
Changes:
1. class BOPTools_AlgoTools
method:
Standard_Boolean BOPTools_AlgoTools::IsSplitToReverse
(const TopoDS_Face& theFSp,
const TopoDS_Face& theFSr,
Handle(IntTools_Context)& theContext)
The condition for a point on the surface of a face has been changed.
2. class BOPAlgo_PaveFiller
method:
void BOPAlgo_PaveFiller::MakePCurves()
The treatment of E/E common bocks has been changed
to use mechanism of attacment P-Curves [ I.1 ]
Test case for issue CR25880
Changes:
class BOPTools_AlgoTools
- method:
void BOPTools_AlgoTools::MakeVertex(BOPCol_ListOfShape& aLV,
TopoDS_Vertex& aVnew)
has been changed.
The section for case of two vertices has been added
Test case for issue CR24803
Changes:
class BOPTools_AlgoTools
method:
Standard_Boolean BOPTools_AlgoTools::GetFaceOff
(const TopoDS_Edge& theE1,
const TopoDS_Face& theF1,
BOPTools_ListOfCoupleOfShape& theLCSOff,
TopoDS_Face& theFOff,
Handle(IntTools_Context)& theContext)
has been changed.
The comparison of the angles done with the angular tolerance value
Test case for issue CR25838
class BOPTools_AlgoTools
1. method Standard_Boolean FindPointInFace(const TopoDS_Face& aF,
const gp_Pnt& aP,
gp_Dir& aDB,
gp_Pnt& aPOut,
Handle(IntTools_Context)& theContext,
GeomAPI_ProjectPointOnSurf& aProjPL,
const Standard_Real aDt,
const Standard_Real aTolE)
Use different method of finding a point in the face if the start and projected points are close to each other.
2. method Standard_Real MinStep3D(const TopoDS_Edge& theE1,
const TopoDS_Face& theF1,
const BOPTools_ListOfCoupleOfShape& theLCS,
const gp_Pnt& aP)
The min 3D step has been increased for the spherical faces.
Test case for issue CR25600
Correction of test case for issue CR25600
Changes:
class BOPTools_AlgoTools
static function:
Standard_Boolean FindPointInFace(const TopoDS_Face& aF,
const gp_Pnt& aP,
gp_Dir& aDB,
gp_Pnt& aPOut,
Handle(IntTools_Context)& theContext,
GeomAPI_ProjectPointOnSurf& aProjPL,
const Standard_Real aDt,
const Standard_Real aTolE)
Binormal calculation starts from the point located outside the tolerance circle of the edge
Test case for issue CR25432
Correction of test cases for issue CR25432
class BOPTools_AlgoTools
method
Standard_Boolean BOPTools_AlgoTools::IsSplitToReverse
(const TopoDS_Face& theFSp,
const TopoDS_Face& theFSr,
Handle(IntTools_Context)& theContext)
Reverse normal direction for REVERSED faces.
Test case for issue CR25127
Classes BOPInt_Context, BOPInt_ShrunkRange, BOPInt_Tools have been removed.
Package BOPInt has been removed
Classes IntTools_Context, IntTools_ShrunkRange have been added to replace corresponding BOPInt_ classes.
The classes provide same functionality as corresponding BOPInt_ classes.
Classes :
BOPAlgo_ArgumentAnalyzer
BOPAlgo_Builder
BOPAlgo_BuilderArea
BOPAlgo_BuilderFace
BOPAlgo_BuilderSolid
BOPAlgo_CheckerSI
BOPAlgo_PaveFiller
BOPAlgo_ShellSplitter
BOPTools_AlgoTools3D
BRepFill_TrimShellCorner
IntTools_BeanFaceIntersector
IntTools_EdgeFace
IntTools_FaceFace
IntTools_Tools
have been modified to use new classes IntTools_Context IntTools_ShrunkRange
Class IntTools_Tools has been modofied to provide the functionality that was in BOPInt_Tools.
Modifications:
1. class BOPAlgo_WireSplitter
1.1. Removed static method RecomputeAngles(...).
1.2. Minor corrections.
2. class BOPTools_AlgoTools
2.1 method GetFaceOff
For definition of an angles between faces the same step in 3D space has been used for all faces in the list.
To define that step new static function MinStep3D has been implemented.
Added test case bugs/modalg_5/bug24879
Deleted unnecessary TODOs in test case bugs/modalg_2/bug497_3
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
New features
class BOPAlgo_BuilderSolid
-method:
void BOPAlgo_BuilderSolid::SetSolid(const TopoDS_Solid& theSolid) has been added.
Purpose: Sets the source solid <theSolid>
class BOPAlgo_BuilderSolid
-method:
const TopoDS_Solid& BOPAlgo_BuilderSolid::Solid()const
has been added.
Purpose: Returns the source solid
Auxiliary classes
BOPAlgo_BuilderSolidFunctor
BOPAlgo_BuilderSolidCnt
have been added.
Purpose: The classes provide the interface and implementation of the parallel computations.
class BOPTools_AlgoTools
-method:
Standard_Boolean BOPTools_AlgoTools::IsOpenShell(const TopoDS_Shell& theShell) has been added.
Purpose: Returns true if the shell <theShell> is open
class BOPTools_AlgoTools
-method:
Standard_Boolean BOPTools_AlgoTools::IsInvertedSolid(const TopoDS_Solid& theSolid) has been added.
Purpose: Returns true if the solid <theSolid> is inverted
class BOPDS_DS
-protected method:
void BOPDS_DS::BuildBndBoxSolid(const Standard_Integer theIndex, Bnd_Box& theBoxS) has been added.
The method computes bouding box <theBoxS> for the solid with DS-index <theIndex>
Changes
class BOPDS_DS
- method:
void BOPDS_DS::Init()
The block to compute bouding box for the solids has been added.
class BOPAlgo_Builder
- method:
void BOPAlgo_Builder::FillIn3DParts
(BOPCol_DataMapOfShapeListOfShape& theInParts,
BOPCol_DataMapOfShapeShape& theDraftSolids,
const BOPCol_BaseAllocator& theAllocator)
The order of treatment of the unbalanced binary tree of overlapped bounding boxes has been changed
class BOPAlgo_Builder
- method:
void BOPAlgo_Builder::BuildSplitSolids
(BOPCol_DataMapOfShapeListOfShape& theInParts,
BOPCol_DataMapOfShapeShape& theDraftSolids,
const BOPCol_BaseAllocator& theAllocator)
The algorithm has been adapted to provide the parallel computations
Changes:
1. class BOPTools
- method:
void BOPTools_AlgoTools::MakeVertex(BOPCol_ListOfShape& aLV,
TopoDS_Vertex& aVnew)
The function fsqrt that calculates the square root of a real number
has been replaced by the standard sqrt.
2. class BOPAlgo_WireSplitter
- static function:
Standard_Real Angle2D (const TopoDS_Vertex& aV,
const TopoDS_Edge& anEdge,
const TopoDS_Face& myFace,
const GeomAdaptor_Surface& aGAS,
const Standard_Boolean aFlag)
The value parametric deltas for computations of 2D-angles
have been changed for Bezier, B-Spline 2D-curves.
Rebuild normal for the face if the method FindPointInFace fails (unable to find point in the face in bi-normal direction).
Adding test case for issue CR24154
I. New features:
no New features.
II. Changes:
II.1. class : BOPAlgo_Builder
- method:
void BOPAlgo_Builder::FillIn3DParts(BOPCol_DataMapOfShapeListOfShape& ,
BOPCol_DataMapOfShapeShape& ,
const BOPCol_BaseAllocator& )
The algorithm of finding 3D-parts for solids has ben changed.
To improve the performance the unbalanced binary tree is used.
II.2. class : BOPTools_AlgoTools
- method:
Standard_Boolean BOPTools_AlgoTools::GetFaceOff
(const TopoDS_Edge&,
const TopoDS_Face&
BOPTools_ListOfCoupleOfShape& ,
TopoDS_Face&
Handle(BOPInt_Context& )
The data treatment for tangent cases has been changed
III. Modified entities:
packages:
BOPAlgo
BOPTools
Small corrections of test cases
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
Fix first subset of warnings (about 100)
- while(1) and similar constructs replaced by for(;;)
- some uninitialized variables corrected
Got rid of Warning C4189: local variable is initialised but not referenced
Corrected mistakes after getting rid of C4189 compiler warning
Corrected some mistakes that led to compiling errors
Fixed test case because of improvement message - removed unnecessary TODO.
Small fix: tabs have been replaced with whitespaces.
Added TODO for Windows platform
removed last TODO
Corrected mistakes, returned some #ifdef DEB code, fixed test case .
Restoring a few places which have been modified too much
Small grammar fix
Deleted unnecessary puts in bugs/end
Modifications:
Changed the way of finding the angle between the faces.
New static functions:
GetFaceDir - builds direction for the face;
FindPointInFace - finds the point in the face in bi normal direction.
New square values have been set in the following test cases:
boolean bopcommon_complex J1
bugs modalg_2 bug202085_6
bug202085_7
bug202085_8
bug202085_9
bug202085_10.
"TODO" marks have been removed from these cases.
Added test cases bugs modalg_5 bug23853
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
