Progress indication mechanism is refactored to support incrementing progress within multithreaded algorithms.
The class Message_ProgressIndicator is only an interface to the user application.
It accumulates the progress provided by progress scopes.
The counter is protected by mutex for thread-safety.
The new class Message_ProgressScope replacing Message_ProgressSentry should be used to advance the progress.
The scopes are nested to each other to reflect the nested nature of operations.
The new class Message_ProgressRange should be used to pass the progress to sub-scopes.
All OCCT algorithms involving progress indication have been updated to new API.
Improvements in Draw_ProgressIndicator:
- Separate console mode has been added in order to make possible to put the progress into std::cout instead
or in addition to the draw interpreter, instead of trigger option "-tclOutput".
- Treatment of Ctrl-Break signal has been added.
Now any operation can be aborted by Ctrl-C or Ctrl-Break keystroke.
Added new test case 'perf fclasses progr_par' for testing of parallel work of the progress.
Draw_Interpretor, CommandCmd() - catched exceptions and messages put into Tcl string result
before throwing a Tcl exception (return 1) are now print in intense red (using Message::SendFail()).
Duplication of exception message in std::cout and Tcl output has been removed.
Draw Harness plugins have been updated to use either Message::SendFail() or theDI instead of std::cout/std::cerr
for printing colored error message before throwing a Tcl exception.
- Fixed condition to allow proceeding of nested compounds;
- Added new key to "reshape" draw command to state a level of type until which requests are taken into account;
- Test case added.
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
Implementation of the method for simplification of the result of Boolean Operation on the API level.
The method BRepAlgoAPI_BuilderAlgo::SimplifyResult has been added, so the derived classes such as BooleanOpeation and Splitter can also use this method.
The result shape simplification should be called after the operation is done. The simplification is performed by the means of ShapeUpgrade_UnifySameDomain algorithm.
Draw command "bsimplify" has been added to control the simplification options.
Documentation for new functionality and draw commands controlling the options of Boolean operations.
Test cases for the new functionality.
Side-effect change:
The algorithms in Boolean component have been changed to use the BRepTools_History as a History tool.
Now it became possible to disable the collection of shapes modifications during Boolean Operations, which may be useful for performance sake (in draw the option is controlled by *setfillhistory* command).
Draw command "unifysamedom" has been changed to accept the angular tolerance in degrees instead of radians.
Implementation of the mechanism for unification of the history commands for all OCCT algorithms.
The following Draw commands should be used to track the history of shapes modifications of any operation:
- modified - to find the shapes modified from the given shape in the given history.
- generated - to find the shapes generated from the given shape in the given history.
- isdeleted - to check if the given shape has been deleted during operation.
The mechanism allows fast & easy enabling of the DRAW history support for the algorithms supporting the history on the API level (i.e. the algorithm should have the methods Modified(), Generated() and IsDeleted()).
To enable the draw history support it is necessary to store the history of the algorithm into the session. For instance:
TopTools_ListOfShape Objects = ...; // Objects
TopTools_ListOfShape Tools = ...; // Tools
BRepAlgoAPI_Cut aCut(Objects, Tools); // Boolean cut operation
BRepTest_Objects::SetHistory(Objects, aCut); // Store the history for the Objects (overwrites the history in the session)
BRepTest_Objects::AddHistory(Tools, aCut); // Add the history for the Tools
To get the stored history in draw the command "savehistory" should be used. It saves the history kept in session into a Drawable object with the given name:
# perform cut
bcut r s1 s2
# save history of cut
savehistory cut_history
explode s1 f
modified m cut_history s1_1
The Draw History commands of the following algorithms have been removed:
- Boolean Operations;
- Defeaturing;
- Unify same domain;
- Sweep;
- Thrusections;
All these algorithms have been switched to support the new Draw history mechanism.
The Fillet and Blend algorithms have been also enabled to support history commands.
'BRepTools_History' history was implemented for algorithm
'ShapeUpgrade_UnifySameDomain'.
The history of the changing of the initial shape was corrected to consider all
shapes created by the algorithm as modified shapes instead of generated ones.
The old history interface was replaced by the new one:
- to get the modified shapes use: History()->Modified();
- to check if the shapes has been deleted use: History()->IsRemoved().
- The option SafeInputMode has been added in the class ShapeUpgrade_UnifySameDomain. If it is set then the input shape is protected against modifications of any aspects of its sub-shapes. Default value is true.
- The option "-nosafe" has been added in draw command "unifysamedom". If it is not set the algorithm is run with SafeInputMode switched off.
- The methods "Modified" and "IsDeleted" have been added for history support in "ShapeUpgrade_UnifySameDomain" class.
- The new Draw commands "unifysamedommod" and "unifysamedomisdel" have been added.
- Adoption of other algorithms using this one to its new behavior.
Removing code duplication
Correcting regressions
Correcting remarks
- New methods SetLinearTolerance and SetAngularTolerance have been added in the class ShapeUpgrade_UnifySameDomain.
- The algorithm has been modified to consider these tolerances when checking if two faces are same domain.
- The draw command unifysamedomain has been changed to accept new parameters.
- The internal method MergeSeq has been changed to avoid exception connected with access to unknown key in the data map.
Create test case
Small correction of test case for issue CR27729
Add check on empty topological containers.
Add empty shapes to the replacement map.
Add Draw command for Re-Shape.
Add a test grid for reshape with a single use case for starters.
The new option AllowInternalEdges has been added in the class ShapeUpgrade_UnifySameDomain. It determines how the algorithm treats the situation when two faces can be merged together but they have connection with another face via the common edge.
With this option turned on, merging of such faces is not stopped, but the multiconnected edges are added to the merged face as INTERNAL edges.
By default it is false. In this mode such merging is forbidden, so the result shape will not contain any new INTERNAL edges.
The behavior of the algorithm has been changed so that it does not merge faces from different shells.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Added DRAW command dlocale to set and query current locale of the C subsystem
Equivalents of C functions working with conversions of strings to/from reals added in Standard_CString, providing locale-independent behavior (using always "C" locale)
In DRAW packages, calls to atof() and atoi() are replaced by direct calls to Draw::Atof() and Draw::Atoi(), respectively, instead of substituting by #define
Use of atof(), strtod(), and *scanf() involving floating point conversions in OCCT code replaced by locale-independent Atof() and Strtod()
Calls to sprintf() involving floating point in OCCT code are replaced by call to locale-independent Sprintf(), except a few places where converted strings are used immediately for display in the 3d viewer
Changes of global locale are eliminated throughout OCCT code
Proposed correction for GNU libC where v*printf_l functions are absent
Added test case (bugs xde bug22898) for data exchange operations with non-standard locale
Use xlocale on Mac OS X and within glibc
Corrected strtod_l wrapper
Generate error rather than warning
Introduce Standard_CLocaleSentry replacement for removed OSD_Localizer
Standard_CLocaleSentry - copy locale string
Standard_CLocaleSentry - use _configthreadlocale on Windows
Standard_CLocaleSentry::GetCLocale() - return locale_t rather than void*
Corrected misprint in ~Standard_CLocaleSentry()
Use French locale in bug22898 test case
Mark test case as skipped if locale is unavailable on tested system.
Use fr_FR locale for tests on Mac OS X
