Test for 0027049: Make non-destructive mode be defined by default in Boolean operations
Test for 0027052: Test boolean gdml_private ZI5 failure
Test for 0027069: IGES parser does not recognize comments in Parameters section
Test for 0027090: Point is classified IN solid but actually it is OUT
Test for 0027170: Reading STEP files produces invalid shapes
Test for 0027186: IGES - reconsider creation of Undefined entity in case of failure
Test for 0027214: Duplicate of test cases
Test for 0027224: Incorrect result of boolean operation in boolean bcut_complex Q1 test case
Test for 0027227: Intersection curve is not continued to the surface boundary
Test for 0027246: ShapeFix_Shape destroys shape
Test for 0027251: Shape becomes invalid when exported to STEP and imported back
Test for 0027316: exception when XAddShape
Test for 0027378: BRepLib_MakeFace produces invalid faces on periodic surfaces in case the given parametrization does not match the default
Test for 0027390: Box and Ellipsoid shape boolean cut and common introduce invalid result.
Test for 0028119: Blend fails on fused identical but shifted tori
Test for 0028144: Step reader - regression in comparison of version OCCT654
Test for 0028151: Sewing faces results in a shell with very big tolerance
Test for 0027160: Weird results of the pipe algorithm
Test for 0027623: Cannot find intersection line between two trimmed planar surfaces
Test for 0027683: Inaccurate result by bopcut
Test for 0027687: Section between shells of hull and deck is not closed
Test for 0027711: Blend-on-blend corrupts the shape
Test for 0027784: Thickness fails on cylinder with draft
Test for 0027908: Exception during offset computation
Test for 0027909: Exception during offset computation
Test for 0027910: Sharing between edges was lost after offset operation
Test for 0027911: Exception during offset computation
Test for 0027912: Exception during offset computation
Test for 0027928: BOP common produces empty compound
Test for 0027948: Cut produces unexcpected shape
Test for 0027950: Result of intersection algorithm depends too much on surface trim bounds
Test for 0027701: Crash when export empty solid to STEP
Test for 0027722: STEP error for Ellipse revol shape
Test for 0025930: thickness of spherical cap is invalid
Test for 0025939: SIGSEGV in MakeThickSolid
Test for 0025940: MakeThickSolid creates C0 continuous edges
Test for 0026604: GeomFill_Pipe doesn't fit given bounds
Test for 0026655: ChFi3d_Builder algorithm fails to build fillets if some input edges connect with seam edges
Test for 0026697: BRepFeat_MakePrism returns empty compound
Test for 0026716: Mesher cannot create a mesh of brep model due to ShapeFix_Wire::FixShifted()
Test for 0026735: Adjacent perpendicular edges are detected as overlapped by DRAW command checkoverlap.
Test for 0026793: General Fuse algorithm produces incorrect result
Test for 0026795: Unable to perform General Fuse operation on the attached faces
Test for 0026842: bopsection result does not contain any edges.
Test for 0026882: Edge/Edge intersection algorithm produces incorrect result
Test for 0026883: Wrong result of Boolean Operation
Test for 0026889: Very poor mesh result from shape
Test for 0026928: Edges are meshed too coarsly
Test for 0026933: Section works unstably due to incorrect work of the method IsExistingPaveBlock
Test for 0026943: Wrong projection of helix on cylinder by ShapeConstruct_ProjectCurveOnSurface
Test for 0026957: Unify same domain operation is slow for multiple shells
Test for 0026978: Interactive selection is insensitive to swept shell
Test for 0027004: ShapeUpgrade_UnifySameDomain produces invalid result
Test for 0026280: Mechanism 'ShapeFix' is unable to heal a shape
Test for 0026282: Mechanism 'ShapeFix' has errors revealed by wire tool 'FixTails'
Test for 0026291: BRepMesh produces mesh with gap on the attached shape
Test for 0026382: BRepMesh produces internal nodes outside the face interior
Test for 0027453: Wrongly meshed surface
Test for 0027524: The command checkshape does not find the maximal deviation between curves representations
Test for 0026225: Wrong result of chamfer in case of coinciding bound of chamfer's surface with bound of a face
Test for 0026295: Sweep fails with BRepFill_ContactOnBorder
Test for 0026374: GeomFill_Profiler fails to unify BSplines if one has knot distance less than PConf
Test for 0026558: Failing to build isoline for offset surface
Test for 0026563: Boolean cut operation in new API multi-tool mode performs fuse instead of cut
Test for 0026568: Exception when creating pipe
Test for 0027419: Incorrect result of Edge/Face intersection
Test for 0027469: Regression vs 6.9.1: Wrong result of Edge/Face intersection
Test for 0027471: Wrong result of pipe
Test for 0027472: Wrong result of cut
Test for 0027614: Sewing returns result with too high tolerance
Test for 0026154: Visualization - v3d viewer grid disappears due to automatic z-fit
Test for 0026174: Loss of color after the second write of file (iges).
Use Quantity_ColorRGBA instead Quantity_Color in XCAFDoc_Color attribute
Add methods to color tool for processing RGBA
Update Color driver
Update Draw commands
Add new root label in Document for Views.
Add new attribute to store View in XDE.
Add object and tool to process Views.
Add new Draw commands for Views.
- Implement top-down update for assemblies in XCAFDoc_ShapeTool
- Get rid of UpdateAssembly() method used for partial (parent-only) update
- Adjust STEP and IGES translators to use the top-down update after filling OCAF
- Implement XUpdateAssemblies Draw command
- Add test cases bug28055_1 and bug28055_2 for component removal and part update
- Update XDE documentation to mention the new UpdateAssemblies() method
Correction for issue CR28055
Adjusting of test case bugs/fclasses/bug28217
Fields to store cached instances of reader and writer drivers for each format are added in CDF_Application.
Method DefineFormat() is added in TDocStd_Application, allowing defining format completely by single call, including drivers to be used for persistence.
All OCAF driver packages provide static method DefineFormat() that defines standard OCAF persistence format supported by corresponding package; these methods are called in DRAW to enable all persistence by default.
DRAW commands (except TObj-specific ones) now use single instance of OCAF Application, returned by DDocStd::GetApplication(). Other instances are eliminated, as well as method DDocStd::Find(const Handle(TDocStd_Application)&).
Method MessageDriver() and relevant field are moved to TDocStd_Application from its descendants.
Method CDF_Application::ReaderFromFormat() is made virtual to allow its redefinition in descendants.
Creation of storage driver is moved from PCDM::StorageDriver() to new virtual method CDF_Application::WriterFromFormat().
The code loading driver as plugin is retained in both these methods for compatibility.
Test command OCC24925 is converted to use virtual methods instead of defining plugin resource.
Migration table for old OCAF types is hard-coded in Storage_Schema::CheckTypeMigration().
Removed obsolete and unused items:
- FWOSPlugin library (driver is created directly)
- Methods in classes CDM_Document dealing with unused parameters of format
- DRAW command OCC23010 for testing non-reproducible issue #23010
- Methods PCDM::StorageDriver(), PCDM::FindStorageDriver()
- Method Formats() from CDF_Application and descendants
- Methods LoadExtensions and SchemaName from PCDM_StorageDriver
- Method Plugin::AdditionalPluginMap()
- Method BinLDrivers_DocumentStorageDriver::SchemaName()
- Method CDF_Application::DefaultExtension(), Reader(), FindReader(), FindReaderFromFormat()
- Method CDF_Store::Check()
The cause of errors is a non alphabetical order of complex entity, which do not affect export.
Move messages to debug mode.
Replace fail by warning.
Correction of test case bugs/vis/bug23153 according to the new behavior
Adding support for long IGES names.
The method IGESCAFControl_Writer::WriteNames is now extended
to also write IGES 406 / 15 name entities containing the full label name.
Test case for issue #27447
In order to avoid using empty strings in the names of the assemblies in the XCAF document after reading step file for cases when description or name is defined by only 1 space character method TCollection_AsciiString::Length()
was replaced on the method TCollection_AsciiString::UsefullLength().
Test case for issue CR27169
Eliminating warning
Command checkplatform was created.
All test cases were updated.
Global variable os_type was eliminated.
New option -osx (MacOS) for procedure checkplatform was added.
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Added new functionality for converting the compound to assembly.
Added new drw command XExpand.
Changed DumpShape and DumpAssembly
Added test.
test changed
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
All uses of "MDTV-Standard" and "MDTV-Design" in tests changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
Formats changed: .std to .cbf, .dxc to .dbf.
Test groups renamed accordingly:
xcaf: brep_to_dxc -> brep_to_xbf, igs_to_dxc -> igs_to_xbf, stp_to_dxc -> stp_to_xbf, dxc -> xbf/A1, dxc_add_CL -> xbf_add_CL
xml: ocaf_std -> ocaf_cbf, xcaf_dxc -> xcaf_xbf
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
- properly process 0-density material - create STEP density structures if and only if the density is > 0
- properly process 0-density material - create STEP density structures if and only if the density is > 0, but preserve the already mapped structures
Test-case for issue #25910
Add new flag IsAutoTriangulated to Prs3d_Drawer. It is True by default.
If this flag is True automatic re-triangulation with deflection-check logic will be applied.
Else this feature will be disable and triangulation is expected to be computed by application itself.
Change the syntax of vdefalts command.
Add new parameter -autoTriang for check of AutoTriangulated functionality.
Adjust camera position in test case bugs/xde/bug23969
Test cases save results in directory pointed by ${imagedir} Tcl variable. File names are initialized in scripts and passed to DRAW command as argument.
Tests User Guide was updated.
Remarks were corrected
Interface_CheckTool does not reset the Check added to CheckList now.
Added test case bugs/xde/bug25176
Update reference data in test cases.
Resolving conflicts:
tests/de/iges_3/A4
tests/de/step_1/R7
tests/de/step_2/H1
StlTransfer.cxx, function StlTransfer::BuildIncrementalMesh(...) fills the StlMesh_Mesh. Before this fix the StlTransfer always force meshing of the passed shape.
Now meshing is completely removed from the StlTransfer. StlWriter can return error status now, for example, if a mesh of the passed shape is empty. In this case file will be not created.
Added test case bugs/xde/bug25357
Avoid the warning on gcc compiler.
Test scripts were modified according to the fix.
1) bug23192, bug22670, bug23193: removed "isParallel" flag from the command
arguments. Manually meshing of the shape (as far as meshing was removed
from STL writer).
2) bug22898: before the fix writestl always remeshes the shape with a
deflection, related to the boundery box of the shape. For "hammer" shape
there is a 38.9076 deflection for mesh. Differences between before writing
and after reading are dedicated to fact that stl writes triangulation as
an elements of the spahe (like faces, edges etc.)
If-else blocks "scale" and "scaleOrientation" was swapped. Now the comparing and interpretation of these key-words is correct.
Added test case bugs/xde/bug23328
Usage of QAGetPixelColor were checked and corrected.
Using simple comparison instead of regexp.
Improved usage of command vreadpixel for standard colors.
Command QAGetPixelColor was dropped from TKQADraw.
Procedures "checkcolor" and auxiliary "checkpoint" were moved to DrawResources/TestCommands.tcl
Some test cases using "checkcolor" for picking line color were simplified.
Procedures checkcolor and checkpoint were changed to handle situation when pixel is out of view.
Removed unnecessary use of command "vaspects -setwidth" in tests.
Revert -setwidth change in test bugs/vis/bug23525
An improved RWSTL::ReadFile() method + a draw-command returning the number of nodes and triangles for a MeshVS_Mesh object based on STL mesh data source.
An indexed map of points is replaced by a CellFilter of XYZ objects already implemented in BRepBuilderAPI.
Also, BRepBuilderAPI_VertexInspector became exported for TKTopAlgo library (Standard_EXPORT is added for the methods of this class).
Standard_EXPORT is removed for in-line methods of BRepBuilderAPI_VertexInspector
Test-case for issue #25405
Update of test-cases, according to new behavior
Improved output of Xdump command using Draw_Interpretor.
Improved output of Xdump command using Standard_SStream.
OStream is used instead of SStream.
Test cases for issue CR23911
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Method IGESCAFControl_Writer::WriteNames now iterates over all nested assemblies and collects names for shapes.
Regression fix
Test-case for issue #21802
Warning was fixed.
Remarks were applied.
- class VMap in Draw was removed
- NCollection_DataMap is used to store objects
- name of object is used to associate Tcl variable with the object
- creation and changing of objects are correclty handled
Redundant casts were removed.
Initial value is restored if variable is protected.
Tests for bug #24863 were added.
Some test cases and tcl command "save" were improved.
Useless using of upvar was removed.
