1. The reason of exception has been eliminated.
2. Algorithm in IntPatch_WLineTool::JoinWLines(...) method has been modified in order to forbid join curves in the point where more than two intersection lines meet. More over, joining is forbidden if local curvature in the connection point is too big (see function CheckArgumentsToJoin(...) in the file IntPatch_WLineTool.cxx).
3. Interface of IntPatch_WLineTool::JoinWLines(...) method has been modified in order to reduce number of arguments.
4. Small corrections in IsSeamOrBound(...) static function has been made. Namely, check has been added if two boundaries are in the same period region but are too far each to other (see IntPatch_WLineTool.cxx, IsSeamOrBound(...) function, line # 532).
5. "Reversed" flag has been made local. Now, it is pure local characteristic: the algorithm decides itself, shall we reverse the argument order. This correction makes the algorithm more commutative (see issue #25404). However, IntPatch_WLineTool::JoinWLines(...) method can return non-commutative result.
6. Algorithm of searching small intersection curves has been improved.
7. New methods have been added in Bnd_Range class.
Some test cases have been adjusted according to their new behavior.
1. tests\bugs\modalg_6\bug26310_3
tests\bugs\modalg_6\bug26310_4
tests\bugs\moddata_2\bug235
tests\perf\modalg\bug26310_1
tests\bugs\modalg_5\bug24915
Logic of these cases has been changed. Mover over, additional check has been added in "bug26310_1" test case. Therefore, its performance will be slower than on the current MASTER.
2. tests\bugs\modalg_5\bug25292*
Scripts have been rewritten in order to make it more readable. Logic of these cases has not been changed.
The main reason of the regression is that the Extrema algorithm finds the truth extrema point but cannot adjust it to the range of given circle. It is connected with the fact that Geom(2d)Adaptor_Curve::IsPeriodic() method returns false for given circle because adaptor contains a piece of the circle which is not closed.
New algorithm of IsPeriodic() method will return the information about periodicity of the curve itself (independently of first and last parameter of adaptor).
The documentation about Geom(2d)_TrimmedCurve and Geom_RectangularTrimmedSurface has been updated in frame of the information about IsPeriodic-methods.
TopAbs::ShapeTypeToString() is now used instead of duplicating TopAbs_ShapeEnum printing code.
vselmode now accepts shape type string for activating standard AIS_Shape selection modes.
A rebased up-to-date version:
- a bug is fixed (storage and retrieval of display mode in XML file format)
- draw-commands to manipulate the display and selection mode are implemented
- a test command "caf presentation M1" is created
Weighted, Blended Order-Independent Transparency algorithm has been added rasterization pipeline.
In contrast to classical blending transparency it makes transparent objects look independent
from point of view. It also gives better depth occlusion when being used together with a weight factor
based on value of a GL depth buffer. The feature supports desktop OpenGL, OpenGL ES 3.0, ANGLE
and can be used together with MSAA on desktop GL.
To be used it require availability of:
1) Shaders pipeline.
2) Floating point color format for framebuffer (GL_ARB_color_buffer_float).
3) Multiple render targets (GL_ARB_draw_buffers).
Patch does not modify API and does not require application porting.
It adds new rendering options to Graphic3d_RenderingParams structure:
a) Transparency method from enumeration.
b) Scalar factor [0-1] controlling influence of a fragment's depth to its visibility.
Patch also simplifies processing of transparent objects for standard method:
rendering priority of transparent graphical structures is managed automatically,
therefore there is no need to care about it at application's side.
The method Draw_Interpretor::add() has been corrected so that the command getsourcefile returned the relative path starting with "src" without leading "/" on all platforms.
The reason of the bug is bad start points on surfaces, which are used by searching roots algorithm as start points for iteration process. Starting with these points algorithm for searching roots of set of equations cannot reach correct root. To find correct start points increasing number of sampling points is applied.
A new Shaded presentation flag configured through Datum aspect (NOT as usual Display Mode).
Creation of auxiliary Axis/Point/Plane presentations in Trihedron presentation is removed.
'vtrihedron' DRAW command to change parameters of trihedron is extended to cover whole functionality of AIS_Trihedron.
The following classes are redesignede:
AIS_Trihedron,
Prs3d_DatumAspect.
The followin enumermations are created to manage properties of trihedron:
Prs3d_DatumAttribute,
Prs3d/Prs3d_DatumAxes,
Prs3d_DatumMode
1. Clearance of fields of class has been added to the method BRepFill_PipeShell::Prepare().
2. Calculation of error on surfaces has been corrected in the method GeomFill_Sweep::BuildKPart().
3. New Draw command "errorsweep" has been added to check the error reached on the surfaces built by BRepOffsetAPI_MakePipeShell algorithm.
1. Bug fix in reading old persistent data using FSD_File storage driver
2. Persistence compatible with legacy format was restored for shapes
a. Implemented a storage read / write wrapper for legacy persistence
b. Added DRAW commands to read / write files in legacy format
c. Added test cases for reading / writing operations with checking number of sub-shapes and physical properties
d. Updated related sections of the development guide
- The option SafeInputMode has been added in the class ShapeUpgrade_UnifySameDomain. If it is set then the input shape is protected against modifications of any aspects of its sub-shapes. Default value is true.
- The option "-nosafe" has been added in draw command "unifysamedom". If it is not set the algorithm is run with SafeInputMode switched off.
- New method BRepLib::FindValidRange() has been added. It computes the range of the edge not covered by boundary vertices.
- The algorithm of calculation of valid intersection range in the class IntTools_ShrunkRange has been corrected to use the new method.
- The method BOPTools_AlgoTools::MakeSplitEdge() has been improved to protect against errors in the case of reversed orientation of the input edge.
- Two new Draw commands have been added:
validrange - it calls the new method BRepLib::FindValidRange().
tolsphere - it shows tolerances of vertices by drawing a sphere around each vertex of the shape.
- The test cases "offset shape_type_i_c YE1,YE2" became better. The scripts have been corrected to reflect the new state.
1. Re-orienting the shell before making solid from it (MakeShell in BOPAlgo_ShellSplitter);
2. The implementation of the BOPTools_AlgoTools::IsSplitToReverse() method has been changed to
make the usage of the Hatcher for looking for the point in the face default.
3. Test cases for the issue.
1) BRepLib::UpdateTolerances(..) & BRepLib::SameParameter(..) functions now support non-mutable input feature. reshaper is used to store modified copies of subshapes of original (input) shape(s) as substitutions.
2) IsNewShape(..) method has been added to BRepTools_ReShape to check if the given shape has been recorded as a value
Use Quantity_ColorRGBA instead Quantity_Color in XCAFDoc_Color attribute
Add methods to color tool for processing RGBA
Update Color driver
Update Draw commands
1. Modification in static function IntersectionWithAnArc of IntPatch_ImpImpIntersection :
small offset <du> was hardcoded as 1.e-9, now it is adapted to parametric step.
2. Removal of duplicated points of IntPatch_WLine is corrected.
The Face/Face intersection procedure has been changed in Boolean Operations algorithm.
Previously, the intersection tolerance for all section curves between pair of faces has been calculated
as the maximal tolerance among all curves. Now, each curve has its own valid tolerance calculated
as the maximal deviation of the 3D curve from its 2D curves on faces or surfaces in case there are no 2D curves.
Thus, such methods of IntTools_FaceFace algorithm as TolReached3d(), TolReal() and TolReached2d() have been removed.
Now the tolerances of the curve can be obtained from the curve itself (IntTools_Curve - result of intersection):
- IntTools_Curve::Tolerance() - returns the valid tolerance for the curve;
- IntTools_Curve::TangentialTolerance() - returns the tangential tolerance, which depends on the size of the common
between faces. Currently, this tolerance is computed for Plane/Plane cases only. For other case, the value
of the tangential tolerance is the maximal tolerance of faces.
2D intersection tolerance (IntTools_FaceFace::TolReached2d()) has been completely removed from the algorithm as unused.
1. The packages *QANewModTopOpe*, *QANewBRepNaming* and *QANewDBRepNaming* have been removed as containing obsolete features.
The corresponding QA commands (such as OCC252, OCC307 and OCC294) and test cases have also been removed.
2. The QA command buc60609 has been removed. The corresponding test case bugs/moddata_1/buc60609 has been rewritten using b2dclassify command.
Shell check has been improved to use well-known width-first search. It significantly reduces computation time on the big shells.
Test case has been added.
Minor correction in test case
1. The TestTopOpe* packages have been removed.
2. The commands *compare*, *issubshape* and *projponf* have been moved to BRepTest package.
3. The possibility to change the Extrema options has been added to projection algorithm (GeomAPI_ProjectPointOnSurf).
4. Documentation has been updated.
1. The CellsBuilder algorithm has been extended to work with multi-dimensional arguments.
It has become possible not only simulate Boolean expressions, but also perform non-supported
Boolean operations, like cutting face from solid, or fusing face with edge.
2. Test cases with multi-dimensional input shapes have been created.
3. Documentation has been updated.
1. Removal of the traces of the usage of old Boolean operations in BRepFeat package.
2. The DRAW commands *fubl* and *cubl* based on old Boolean operations have been removed.
The alternative for these commands are the commands *bfuseblend* and *bcutblend* respectively.
The last two commands are based on the modern Boolean operations.
3. The DRAW command *ksection* based on old Boolean operations has been removed.
The command *bsection* should be used as alternative.
Test cases which have been using the *ksection* command have been modified to use the *bsection* command.
4. The class QANewBRepNaming_BooleanOperation has been modified to use modern Boolean operations.
The class QANewBRepNaming_BooleanOperation has been removed as not used.
The class QANewBRepNaming_BooleanOperationFeat has been renamed to QANewBRepNaming_BooleanOperation as it has nothing to do with Feat algorithm.
