1. The TestTopOpe* packages have been removed.
2. The commands *compare*, *issubshape* and *projponf* have been moved to BRepTest package.
3. The possibility to change the Extrema options has been added to projection algorithm (GeomAPI_ProjectPointOnSurf).
4. Documentation has been updated.
The new method TopExp::MapShapesAndUniqueAncestors has been implemented, which excludes duplication of ancestors in the list items. The optional Boolean argument 'useOrientation' of this method points whether two same shapes with different orientation will be considered equal.
OCCT code has been inspected and MapShapesAndAncestors has been replaced with MapShapesAndUniqueAncestors where it is necessary.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Useless writes of intermediate shapes to hardcoded paths are removed in samples\mfc\standard\02_Modeling\src\ModelingDoc.cpp
Methods IGESBRep::WriteShape(), XSControl_Utils::WriteShape() are deleted; BRepTools::Write() can be used instead.
Method TopOpeBRepBuild_Tools::DumpMapOfShapeWithState() is moved to where it is used -- TopOpeBRepBuild_Builder1_1.cxx as static function (commented out).
Unused DRAW command OCC18612 is removed.
Upgrade Guide is corrected to avoid Doxygen warnings.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
Useless *.cxx files were removed to eliminate linker warning LNK4221.
Package TopOpeBRepDS was cleaned up from old debugging routines.
Merged OSD_signal_WNT.cxx into OSD_signal.cxx
Class Standard_ErrorHandlerCallback was moved into the Standard_ErrorHandler class as nested class Callback
Eliminated warning about unused variable.
AIS_ColorScale, AIS_Dimension - the protected method DrawText()
has been renamed to drawText() to avoid name collisions with macros.
_MSC_VER/_WIN32 misuse has been fixed in several places.
Header <malloc.h> is now included where alloca() is used.
Draw_Window - dllimport flag has been dropped from inline methods.
TKernel - mandatory dependencies Winspool.lib and Psapi.lib
are now linked explicitly (instead of msvc-specific pragma syntax).
CMake scripts - the option -std=c++0x has been replaced by -std=gnu++0x
for mingw to allow extensions (like _wfopen() and others).
The minimum Windows version has been set to _WIN32_WINNT=0x0501.
Invalid options "-z defs" and "-lm" have been dropped for mingw.
Flag --export-all-symbols has been added to CMAKE_SHARED_LINKER_FLAGS
to workaround missing vtable symbols when using mingw.
FreeType is now linked explicitly on Windows.
Draw::Load() - "lib" suffix is now prepended on mingw as well.
Drop redundant declaration of _TINT from OSD_WNT_1.hxx.
NCollection_UtfString::FromLocale() - platform-specific code has been moved to .cxx file.
Draw_BasicCommands - fixed incorrect mingw64 version macros.
genproj, cbp - added workaround for process argument list limits on Windows.
TKSTEP linkage is failing on this platform due to too long list of files.
The list of object files to link is now stored in dedicated file which is passed to gcc.
Option "-z defs" removed from CMake linker options to avoid problems when building with different configurations of VTK on Linux
Some MinGW-specific compiler warnings (potentially uninitialized vars, use of NULL, parentheses in conditional expressions) are fixed (speculatively)
Copy constructor and assignment operator from handle of derived type is added in handle class.
They are enabled only if macro OCC_HANDLE_NOCASTS is defined, and operators of cast of handle to reference to handle to base type are disabled in that case.
Useless type casts to handle to base type are removed in GC and GCE2d classes.
Code returning reference to handle from function is corrected to return it either by value or as reference to handle of actual type.
Redundant methods Delete() and Desroy(), created in CDL as a hack to define destructor for the class, are removed; their definitions are converted to definition of destructors. In a couple of places methods Destroy() are preserved (bug made non-virtual) because they are called explicitly.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Code corrected to avoid ambiguous situations due to changed implementation of Handle (overloaded methods accepting handles of different types).
In Adaptor3d_CurveOnSurface added method Load() with two parameters, allowing to avoid ambiguity of cast of handles when calling separate methods Load() for curve and surface, replacing by single call.
In DrawTrSurf and IGESData_IGESWriter, template variants of methods Set() and Send(), respectively, are added to avoid ambiguity when these methods are called with handles to derived types (using SFINAE).
In NCollection_DefineHSequence, method Append() accepting handle to another HSequence is made template, to be available only if argument has compatible type.
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
1. Using of the "Closed" flag was unified:
a) this flag is applicable for TopoDS_Wire and TopoDS_Shell only, because these entities may hedge an area in 2D space or a volume in 3D space correspondingly;
b) other types of TopoDS shapes are passing over this flag;
c) changing of this flag should be controlled by high-level algorithms (not BRep_Builder).
2. Implemented verification of the closedness of edges. An edge is closed if and only if its first and last vertices are the same.
3. Test cases were changed according to new behavior.
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
Method BRep_Tool::IsClosed() extended to analyze closure of wires in addition to shells and solids.
External and Internal edges and vertices are ignored in this check.
Analysis of compounds is disabled.
Update of flag Closed according to actual state is added in most places where new shells are constructed.
Draw-command and test case for issue CR25202
All inclusions of "config.h" were removed.
All places where macros defined by config.h were checked and removed
Small corrections for mac os.
Unused code in file OSD_Disk.cxx was removed.
Unused macros and includes were removed from samples and code.
Added necessary includes for MacOS.
Correct new additional compilation warning on Linux platform.
Fix for error in OSD_Chronometer on Debian70/Fedora18
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
Eliminated warnings -Wswitch shown by gcc
Eliminated two new warnings about wrong initialization order
Eliminated warnings about unused functions.
A few more ICC warnings (type conversions) fixed
Removed warning of cppcheck on uninitialized class members for non-array cases
New additional compilation warnings on Windows platform from file OSD_Path.cxx were fixed
Warnings about wrong initialization removed
Eliminated ICC 14 warnings:
# 82: storage class is not first (e.g. "int static f()"
# 2621: attribute "dllexport" does not apply here (e.g. "Standard_EXPORT typedef int qqint;")
# 2415: variable "..." of static storage duration was declared but never referenced
# 111: statement is unreachable (usually "break" after "return" in cycles)
List of resolved warnings:
c4063: Aspect.cdl; TObj_Application.cxx; PCDM.cdl; OpenGl_Workspace_5.cxx;
c4100: XDEDRAW.cxx; ViewerTest_ViewerCommands.cxx; TopOpeBRep_FacesFiller_1.cxx; TopClass_Classifier3d.gxx; TDataStd_ReferenceArray.cxx; QABugs_19.cxx; IntPatch_ImpImpIntersection_5.gxx; HLRTopoBRep_DSFiller.cxx; HLRBRep_Data.lxx; DPrsStd_AISPresentationCommands.cxx; BRepMesh_Delaun.cxx;
c4127: BOPTools_AlgoTools2D.cxx; MAT_Mat.gxx; GeomFill_SweepSectionGenerator.cxx; BRepMesh_Delaun.cxx;
c4189: IntCurveSurface_Inter.gxx; IGESToBRep_BRepEntity.cxx; BRepMesh_Delaun.cxx; BRepAlgo_Loop.cxx; IntStart_SearchOnBoundaries_1.gxx;
c4190: Plugin_Macro.hxx;
c4389: Visual3d_View.cxx; TopOpeBRep/TopOpeBRep_vpr.cxx; TDataStd_BooleanArray.cxx; IntPatch_ALine.cxx;
c4701: BRepAlgo.cxx;
c4702: MNaming_NamingRetrievalDriver_1.cxx; MNaming_NamingRetrievalDriver_2.cxx; BRepClass3d_SolidExplorer.cxx;
c4706: TestTopOpe_BOOP.cxx;
Additional fixes:
- old-style declarations of C functions in IGES and STEP parsers
- clean-up of debug code, fixes for building in Debug mode
- in BRepFill_TrimShellCorner.cxx, lines 878-9, wrong use of assignment instead of comparison fixed
- fix for Plugin_Macro reverted; warning 4190 disabled instead
- in IntPatch_ALine.cxx, line 520, wrong comparison of boolean with index fixed
- in InterfaceGraphic_Visual3d.hxx, field IsCustomMatrix made boolean
- in TopOpeBRepBuild_ShapeSet, obsolete (unused) methods removed
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
Added DRAW command dlocale to set and query current locale of the C subsystem
Equivalents of C functions working with conversions of strings to/from reals added in Standard_CString, providing locale-independent behavior (using always "C" locale)
In DRAW packages, calls to atof() and atoi() are replaced by direct calls to Draw::Atof() and Draw::Atoi(), respectively, instead of substituting by #define
Use of atof(), strtod(), and *scanf() involving floating point conversions in OCCT code replaced by locale-independent Atof() and Strtod()
Calls to sprintf() involving floating point in OCCT code are replaced by call to locale-independent Sprintf(), except a few places where converted strings are used immediately for display in the 3d viewer
Changes of global locale are eliminated throughout OCCT code
Proposed correction for GNU libC where v*printf_l functions are absent
Added test case (bugs xde bug22898) for data exchange operations with non-standard locale
Use xlocale on Mac OS X and within glibc
Corrected strtod_l wrapper
Generate error rather than warning
Introduce Standard_CLocaleSentry replacement for removed OSD_Localizer
Standard_CLocaleSentry - copy locale string
Standard_CLocaleSentry - use _configthreadlocale on Windows
Standard_CLocaleSentry::GetCLocale() - return locale_t rather than void*
Corrected misprint in ~Standard_CLocaleSentry()
Use French locale in bug22898 test case
Mark test case as skipped if locale is unavailable on tested system.
Use fr_FR locale for tests on Mac OS X
