The cause of errors is a non alphabetical order of complex entity, which do not affect export.
Move messages to debug mode.
Replace fail by warning.
Correction of test case bugs/vis/bug23153 according to the new behavior
Do ProcessShape for non-manifold too,
Add binding of already written shared faces to STEP entity for non-manifold.
Minor correction of test case bugs/step/bug27329
Modification to create natural bounds for face based on the spherical and Bspline surface and having only one bound represented by Vertex loop was made.
According to the specification of ISO-10303 part 42:
"If the face has only one bound and this is of type vertex_loop, then the interior of the face is the domain of the face_surface.face_geometry. In such a case the underlying surface shall be closed (e.g. a spherical_surface.)"
- natural bounds are applied only in case if VertexLoop is only the one
defined face bound.
Update of test-cases according to the new behavior
Test-case for issue #24595
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
Make modification to save in the file part of the XCAF document starting from specified label.
If specified label is component of the high-level assembly then high-level assembly is saved in document with one specified component.
In other case only part of the document starting from the specified label is saved.
Modification of the translation of the face based on the toroidal surface with negative major radius was made.
Seems that such face is considered by "Solid Works" and "ProE wildfire 5.0" systems as face having reversed orientation.
This step file was written by "Solid Works 2014".
Test case for issue CR26376
Exception is raised during reading step file containing p-curve having not-unique last knot.
Modification correcting misprint during computation new numbers of poles for such case was made in the file StepToGeom_MakeBSplineCurve.pxx
Protection against exception was made in the file StepToTopoDS/StepToTopoDS_TranslateEdge.cxx.
Warning message was added in the file StepToTopoDS_TranslateEdgeLoop.cxx.
Test case for issue CR26289
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
add check for edges with null 2D and 3D curves for STEP,
for IGES problem exists only with wires, where non-invalid edge is only one, and it is not the last in wire(fixed).
Test case for issue CR25843
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
New features:
1. class BRepCheck_Solid
The class is to check a solid per se.
The scan area is:
i. Shells that overlaps each other
Status: BRepCheck_InvalidImbricationOfShells
ii. Detached parts of the solid (vertices, edges)
that have non-internal orientation
Status: BRepCheck_BadOrientationOfSubshape
iii. For closed, non-internal shells:
iii.1 Shells containing entities of the solid that
are outside towards the shells
Status: BRepCheck_SubshapeNotInShape
iii.2 Shells that encloses other Shells
(for non-holes)
Status: BRepCheck_EnclosedRegion
Changes:
1. enumeration BRepCheck_Status
members:
InvalidImbricationOfShells,
EnclosedRegion,
has been added
2. class BRepCheck
method:
void BRepCheck::Print(const BRepCheck_Status stat,
Standard_OStream& OS)
has been modified to take into account II.1
3. class BRepCheck_Analyzer
method:
void BRepCheck_Analyzer::Put(const TopoDS_Shape& S,
const Standard_Boolean B)
has been modified to take into account I.1
4. class BRepTest
function:
void StructuralDump(Draw_Interpretor& theCommands,
const BRepCheck_Analyzer &theAna,
const Standard_CString ShName,
const Standard_CString Pref,
const TopoDS_Shape &theShape)
has been modified to take into account I.1, II.1
Test cases for issue CR25509
Correction of test cases for issue CR25509
OSD_OpenFile.hxx header is created for using in file open operations with Unicode names.
Fix for STEP files reading.
Adding test cases for issue 25367
Update test case for issue 25364
Update test cases due to improvements
Allow GEOMETRIC_SET entity to accept GeometricRepresentationItem children
Modification to avoid cyclic dependency between STEPControl and StepToTopoDS packages
Test cases for issue CR25166
Add checks for cone-like surfaces during seam fixing
Delete check for missing degenerated edge for cones in FixMissingSeam() function, because this check is exist in FixPeriodicDegenerated(). Check for uniqueness of wire is unnecessary after this.
Update of test-cases
Call to locate_data_file moved from catch statement in test scripts to ensure that missing data file is correctly reported as SKIPPED status of the test.
TODO statements with single word 'Exception' made bit more specific ("**" added).
Test bugs/caf/buc60846 removed as it is aimed to test inexistent component (Sketcher).
TODO removed in test bugs/fclasses/bug22611 -- the missing command must be added or test removed.
Test bugs/step/bug133_4 removed as duplicate of bugs/step/bug133_2.
Command vinit added in test bugs/vis/bug23226 to ensure that viewer is properly initialized before command vvbo, and relevant TODO statements removed.
Redundant FAILED patterns removed in parse.rules in groups perf and v3d as they break appropriate handling of missing data files.
Added QA command OCC22611 to improve test case bugs/fclasses/bug22611.
Modified test case buc60898 (shape was renamed) and moved to folder moddata_3 to avoid checkshape in end file.
Test case vis/bug23226 was modified using function checkcolor.
Modified END file of all group bugs. Command nbshape moved to END file. Add begin with variable subgroup
Small correction in END file
Replaced test case bug726_3 from moddata to modalg
Test case tests/bugs/modalg/dxf906 was renamed to bug889
Adding test cases to tests/bugs/moddata
Modified expressions puts [checkshape result]. Added command vzfit in end file in folder bugs. Unlocked command coordload in QABugs_3.cxx
Modified test case bugs vis buc60738
Added test cases to modalg and moddata
Added test cases to caf and fclasses
Added test cases to group heal
DRAW commands stepwrite and brepiges modified to never ask for interactive input of file name or write mode; the behavior is completely defined by input arguments. String buffers causing access violation due to overflow are eliminated.
Test case bugs xde bug23561 added for this issue; TODO 23651 in related test cases removed.
Compiler warning (unrelated) is fixed in QABugs_11.cxx
