Use std::mt19937 random number generator instead of rand() in NCollection_UBTreeFiller.
boolean gdml_private ZI7 ZJ7 - TODO "bopcheck failed" is only for Linux now, checkshape faulty is unstable (issue #27052)
boolean volumemaker B6 - Added TODO (bopcheck and checkshape faulties)
boolean volumemaker C9 - Added TODO (checkprops and checkshape faulties)
boolean volumemaker D2 - Added TODO (checkshape faulty)
boolean volumemaker H4 - Added TODO (checkprops and checkshape faulties Linux only)
boolean volumemaker D5 - IMVPROVEMENT, TODOs were deleted (bopcheck and checkshape faulties)
bugs modalg_1 buc60462_2 - modified TODOs according to new behavior
boolean gdml_private ZI7 ZJ7 - unstable case, added check for surface area and TODO
samples/tcl/ANC101.tcl - amended due to changed order of edges in BOP result
Two new sample scripts added, modeling classic shapes from used for comparing modeling systems in 1979 and again in 1983 by Computer Aided Manufacturing International (CAM-I).
BRepMesh_CircleTool: extend radius of circle by quite small value in order to classify points forming inscribed triangle as lying on it. Do not use PConfusion due to false positive result leading algorithm to hanging.
Small correction in test cases bugs/mesh/bug27119
Update of test cases according to the new behavior:
bugs/moddata_1/bug22759
mesh/data/standard/M4
Virtual method Generated() inherited from BRepPrimAPI_MakeSweep is overridden in class BRepOffsetAPI_MakePipe, providing information on shapes generated from the profile.
1. Step of Walking-line has been increased as possible and now computes by iteratively adaptive algorithm (every iteration checks if current step is too big/small and decreases/increases one).
2. Interface of IntWalk_PWalking class has been changed
2.1. Method MaxStep() has been added in order to know about maximal distance between 2D-points.
2.2. Method ComputePasInit(...) has been added in order to initial step value computation.
2.3. Fields myTolTang (tolerance for intersection algorithm) and myStepMin (minimal step value) have been added.
Correction of some test cases.
Creation test case for this issue.
Changes to eliminate compiler warnings.
Extrema Curve / Surface algorithm changed to perform more accurate search.
test case bug25232_8 - improvement, one additional intersection point is detected now.
test case bug23830 - normal behavior, position of extrema is changed.
test case for original issue added.
Method BRepGProp::LinearProperties() is corrected to treat not geometric edges (their length is zero). To avoid wrong working of command nexplode global properties are calculated as point properties of vertexes. Small value Epsilon(1.) is used as density of points. This prevents exception on shapes that contain such edges, e.g. copy of a wire containing degenerated edge.
Method BRep_Tool::IsGeometric() is optimized to avoid nested iteration for check of 3D curve for Null.
Small bug is fixed in GProp_PGProps.cxx
Useless variable MAXTOLERANCEGEOM is removed in order to allow to place point at any distance from curve/surface.
Algorithm is simplified: particular calculations for analytical geometry are removed, only using of Extrema_... is kept.
Test case for issue #27110
checkdump - procedure to parse output dump and compare it with reference values;
checklength - procedure to compute length of input shape.
Added procedures and modified test group geometry.
1. Disable recalculation of B-spline cache when the parameter is out of surface boundary but near the cached span.
2. Rebuild cache each time a curve/surface is loaded into adaptor (B-spline knots may be re-parametrized outside adaptor without changing base curve)
3. Test cases.
Conversion of gp_Quaternion to and from intrinsic Tait-Bryan angles (including gp_YawPitchRoll) is fixed.
Before that fix the sequence of rotation axes was opposite to intended; e.g. gp_YawPitchRoll (equivalent to gp_Intrinsic_ZYX) actually was defining intrinsic rotations around X, then Y, then Z.
Now this is fixed, and rotations are made in correct order.
Comments to gp_EulerSequence enumeration are restored (lost due to CDL extraction).
Test bugs fclasses bug25574 is added to check correctness of Euler sequences, including cases from #25574 and #25946.
1. The procedures for check of coincidence between Edge-Edge and Edge-Face have been added. These methods are used instead of searching interferences between corresponding sub-shapes. In most cases (including case for this issue), new methods are more reliable and faster than intersections. However, its use should be avoided in case when the edge is not coincide with edge/face of another argument evidently (e.g. if edge vertices are not in another edge/face).
2. Interface of both IntTools_EdgeFace and IntTools_EdgeEdge has been changed (adding/deleted some field and methods).
Some test cases have been corrected in accordance with their new behavior.
Test case for issue CR26132.
Performance of the algorithm ShapeUpgrade_UnifySameDomain has been improved by avoiding of multiple calls of ShapeBuild_ReShape::Apply() method.
New test cases have been added.
Add checks to avoid exceptions.
Remove check for small 3D curve, now pcurve will be built for all small edges, which have not been removed by FixSmall.
Standard_OutOfMemory exception is refactored so as to avoid memory allocations (which will likely fail) when it is raised:
- method NewInstance() returns static instance (singleton)
- method Raise() raises copy of that singleton, resetting its message string
- message string is stored as field, not allocated dynamically (thus maximum message length is limited by buffer size)
Class Standard_Failure slightly revised: method Destroy() is merged to destructor, methods Get/SetMessageString() are made virtual.
Add test case for the bug
firsthole / holend / hole commands have been corrected.
Now they work correctly on the planar faces
Also some commented code have been deleted
Temporary update for backward compatibility with WOK
- Avoid reducing tolerance of the original edges in BOPAlgo_PaveFiller::CorrectToleranceOfSE
- If a boundary edge is considered coincident with a section curve then increase its tolerance more carefully, using real distance instead of extended reached tolerance.
- New test case bugs/modalg_6/bug27032
- Test cases boolean/gdml_private/E4-F3 have been amended to check area of the result.
- Puts TODO in test cases boolean gdml_private ZI5,ZI7,ZJ7.
Writing periodic BSpline surfaces to IGES:
Replace segmentation of surface to setting new origin.
Fix face bounds if its length (in U or V) is more than period.
Segmentation of BSpline curve/surface:
Throw exception if segment length more than period.
Fix test case bugs moddata_1 bug14782:
bounds of segmentation must be the same as curve bounds, according to issue description.
Changes in classes Geom2d_BSplineCurve, Geom_BSplineCurve, Geom_BSplineSurface:
- Replace *Raise_if macros with unconditional exceptions where it does not affect on performance.
- Update comments in .hxx files in regard of raised exceptions.
TopExp::Vertices optimized for sequential calls. BRep_Tool::Curve performance regression fixed. Update for fetching point done.
Casts modified to pointers
Test case for issue CR27021
gcc warnings elimination
Interface of AIS_ColorScale is revised to make it more consistent:
- Methods SetBgColor()/GetBGColor(), and corresponding field, are removed. It was used to select white or black color for the color bar frame (by contrast). That color can now be set explicitly by inherited method SetColor().
- Own methods Get/SetColor() are renamed to Get/SetIntervalColor(), to avoid confusion with inherited method SetColor()
- Methods Get/SetWidth() are renamed to Get/SetBreadth(), to avoid confusion with inherited method SetWidth()
- Method Get/Set for labels and colors, and DRAW command vcolorscale, now all accept index starting at 1
- Comments added to explain indexation rules
- Update of mfc samples
- Adjustment of test cases
- Update of CSharp sample (lost button added)
- Corrected paths to data files in 07_Triangulation mfc sample
- Update of overview (Requirements section)
- Update of upgrade guide (changes in modeling algorithms)
- added method UpdateHighlightTrsf for immediate update of highlight presentation's transformation;
- interfaces for immediate transformation update of corresponding presentations were added to entity owner classes;
- test case for issue #26960
0026796: The result of General Fuse operation is self-intersecting shape
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Various bug fixes in the algorithm:
- Compute correct tolerance values for intersections of type Line/Line, Line/Plane, Plane/Plane.
- In case of Line/Plane intersection check if line's vertices lie on the plane.
- Do not allow decreasing of the tolerance value of the Line/Line intersection vertex.
- In IntTools_EdgeEdge, call the method FindParameters with proper 3D tolerance of the curve.
- Force making copy of a degenerated edge if its vertex is touched but no 2D intersection with other curves is found.
- Remove pave blocks both ends of which became referring to the same vertex after vertices substitution.
- Avoid exception in IntTools_Context::IsVertexOnLine if Extrema is not done.
- Reduce tolerance of vertex/edge using actual distances to interfered shapes if it was increased due to line/line, line/plane, or plane/plane small intersection angle.
- Update tolerance of edges to reach all representations in a common block.
- In V-E intersections, check if a vertex hits beyond shrunk range, in such case create V-V interference.
- Do not put a section edge to the result if it becomes to be a micro edge after updating its vertex.
- Correctly make vertices same-domain during the work of MakeBlocks.
- Decrease shrunk range at least on a Precision::Confusion() in addition to vertex tolerance.
- Add Confusion to bounding boxes of new shapes in DS
- Add tolerance Precision::Confusion() to compare distances of touching cases to fix regressions.
TODO marks have been removed from (or modified in) the following test cases (Improvements):
boolean bsection M3 N2 R2
boolean gdml_private B6 C2 C6 G7 I6 F6 J1 J4 M7 N1 N8 N9 O3 O4 O6 O8 O9 P1 P2 P5 Q1 Q3 Q5 S9 T2 U4 U5 U9 ZB5 ZB6 ZC1 ZC5 ZD3 ZD6 ZD7 ZH2 ZH5 ZI2 ZI5 ZI7 ZI9 ZJ3 ZJ4 ZJ7 F8 I6 G1
boolean volumemaker A5 A6 B3 B4 B7 B9 D3 D4 D7 F1
boolean bopcut_2d D5
bugs modalg_5 bug25043
bugs modalg_2 bug472_1 bug472_2 bug472_3
Test cases updated because they are still bad but can be accepted as non-regression:
boolean volumemaker C4 A3 A7 E6
bugs modalg_1 bug10232
boolean bsection N2
Put new TODO in the scripts:
bugs modalg_5 bug25232_9
bugs modalg_6 bug26619
bugs modalg_1 buc60462_2
bugs modalg_4 bug772
For the following tests the result in fix became better, so take fix result as the reference:
bugs modalg_5 bug24628
bugs modalg_6 bug26954_3
boolean volumemaker A4 B5 B6 C3 C8 D2 D5 F2
bugs modalg_2 bug472_2
bugs modalg_1 buc60776_1
- Add the method SetNonDestructive to API classes of user level
Algorithm of curve-face intersection was improved in order to take in account edge tolerance zones for more precise classification of state of intersection point.
Test case for issue CR27010
