Context usage extended in method ShapeFix_Wire::FixSelfIntersection() to avoid modification of original shape by shape healing.
Added check for subshape modification in XSAlgo/XSAlgo_AlgoContainer::MergeTransferInfo().
Test cases are updated to the new behaviour.
Test case for issue CR24658
Poles bounding box for curve added for bezier and bspline curves.
Method Poles() for Bezier curve added.
Test case for issue CR26560
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
Test cases are updated to the new behavior.
Added set of methods CopyVertex in BRepTools_ReShape. Usage of this non-modifying methods added in ShapeFix_Wire, ShapeFix_Edge.
Test case for issue 26656.
Test cases updated to the new behavior.
Correction of test cases for issue CR26656
Changed access by value to access by reference in method CopyVertex.
Algorithm of computation of safe shift value along 2D-line (in order to distance between two points was less than tolerance) has been improved.
Correction of some test cases in accordance with their new behavior.
Test-case for issue #26642
Small correction of test-case
Small correction of test-case bugs heal bug26642
Modification to support case when edges on face have incorrect orientation was added.
Modification to support case when wires have intersecting segment was added
Test cases for issue 25553 added; other affected tests corrected (improvements)
Corrected test case
Add some workaround to read IGES files with lines, which lengths are less than standard 80.
Test case for issue CR26573
Correction of test cases for issue CR26573
Correction of test case for issue CR26573
C2 continuity intervals changed to Knots intervals in case of Bspline curve.
Fixed incorrect extremaPC usage.
Test case for issue CR26351
Update of test-cases according to the new behavior
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Projection is considered as done only if parameter projected point falls within the current interval of parameters.
In the Approx_SameParameter considering tolerance after static method ProjectPointOnCurve was added.
In BRepAlgoAPI_Sewing catch of exception was added and computation of tolerance of edge if same parameter was changed in according to check in BRepCheck_Analyzer
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Modification in order to avoid warning
Test case for issue CR24357
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
All uses of "MDTV-Standard" and "MDTV-Design" in tests changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
Formats changed: .std to .cbf, .dxc to .dbf.
Test groups renamed accordingly:
xcaf: brep_to_dxc -> brep_to_xbf, igs_to_dxc -> igs_to_xbf, stp_to_dxc -> stp_to_xbf, dxc -> xbf/A1, dxc_add_CL -> xbf_add_CL
xml: ocaf_std -> ocaf_cbf, xcaf_dxc -> xcaf_xbf
The analysis of small area in the method ShapeAnalysis_Wire::CheckSmallArea is performed the following way:
- On the fisrt step algorithm produces a rough estimation of part of surface area.
- In a case if obtained estimation is less than tolerance then evaluate real area and comapre this value with tolerance.
- New flag has been added to XSTEPResource/IGES. In a case if flag is true the faces with small 3d area is removed from ShapeFix context.
Test-case for issue #25923 and update test-cases in de group according to the new behavior.
Remove making BSpline surfaces rational,
Add shifting of pcurves on periodic BSpline surfaces,
Add cutting of segment from such surfaces.
Add additional check for need of make segment
Update of test-cases according to the new behavior
Precision used to consider B-Spline knots identical is restricted to be not less than Precision::PConfusion() in Geom2d_BSplineCurve::Segment().
Affected tests updated (improvements)
Test case for issue CR25971
1. Unification of the polygons creation (it is regardless of arguments order).
2. Output of 2dintersect DRAW-command was changed.
3. Geom2dGcc_Circ2d2TanRadGeo.cxx:
Precise intersection point found by Extrema Curve-Curve method (dot product between every tangent vector and vector between points on two curves must be equal to zero).
4. Some comments have been translated from French to English.
Some test case have been updated.
Changes in accordance with the last remark
Test case for issue CR25593
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
Recalculate of tolerance before edge cutting
Test case for issue CR25013
add try to increase tolerance before splitting in singularity during PCurve adding.
Correction of test cases for issue CR25013
Usage of Projlib added in case of uneven points distribution.
Test cases are updated to the new behavior.
Test cases for issue CR17129
Correction of test case for issue CR17129
1. bugs modalg_4 bug697_2 bug697_4 bug697_7 bug697_8 - unstable test cases after fix 25735
Its will be checked and modified during work with performance (issue 24232).
2. bugs mesh bug25364 was tuned for 64-bit Windows.
3. de step_1 ZQ2 fails (64-bit only). Issue 25848 was registered.
4. de step_3 D8 shows improvement (no checkape error) in 64-bit only, this is after 22598 and issue 25797 was registered for that.
5. draft angle G8 improvement (algorithm produces some shape, but fails on checkshape).
6. perf ncollection A1 was tuned for 64-bit Windows.
7. de step_1 R9 - update reference data (according to 25176)
1) Try-catch block was added on a StepToTopoDS_TranslateEdgeLoop::Init() to
catch Standard_ConstructionError during the Curve conversion.
2) Checks of BSpline curve degree added to prevent construction error when converting edges to BSpline_Curve.
3) Warning message was added in case of incorrect curve definition.
Correct of the test cases according to the new error message added with fix
Conflicts:
tests/de/step_1/R9
Modified test cases according to new reference data
Interface_CheckTool does not reset the Check added to CheckList now.
Added test case bugs/xde/bug25176
Update reference data in test cases.
Resolving conflicts:
tests/de/iges_3/A4
tests/de/step_1/R7
tests/de/step_2/H1
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
New features:
1. class BRepCheck_Solid
The class is to check a solid per se.
The scan area is:
i. Shells that overlaps each other
Status: BRepCheck_InvalidImbricationOfShells
ii. Detached parts of the solid (vertices, edges)
that have non-internal orientation
Status: BRepCheck_BadOrientationOfSubshape
iii. For closed, non-internal shells:
iii.1 Shells containing entities of the solid that
are outside towards the shells
Status: BRepCheck_SubshapeNotInShape
iii.2 Shells that encloses other Shells
(for non-holes)
Status: BRepCheck_EnclosedRegion
Changes:
1. enumeration BRepCheck_Status
members:
InvalidImbricationOfShells,
EnclosedRegion,
has been added
2. class BRepCheck
method:
void BRepCheck::Print(const BRepCheck_Status stat,
Standard_OStream& OS)
has been modified to take into account II.1
3. class BRepCheck_Analyzer
method:
void BRepCheck_Analyzer::Put(const TopoDS_Shape& S,
const Standard_Boolean B)
has been modified to take into account I.1
4. class BRepTest
function:
void StructuralDump(Draw_Interpretor& theCommands,
const BRepCheck_Analyzer &theAna,
const Standard_CString ShName,
const Standard_CString Pref,
const TopoDS_Shape &theShape)
has been modified to take into account I.1, II.1
Test cases for issue CR25509
Correction of test cases for issue CR25509
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Method STEPConstruct_Styles::LoadStyles() now imports StepVisual_StyledItem entities even if they was defined without StepVisual_MechanicalDesignGeometricPresentationRepresentation or StepVisual_DraughtingModel entity
Update of reference data
1. Method "SetValues()" for gp_Trsf2d class is added.
2. Method Orthogonalize for gp_Trsf2d and gp_Trsf classes was added.
3. Unused arguments from "SetValues()" method for gp_Trsf was deleted.
4. Output of AppParCurves_MultiPoint Dump was corrected.
5. Method of right projected point choosing was corrected in ProjLib package.
6. Some test cases were changed according to their new behavior.
OSD::SetSignal() called with Standard_False argument to have FPEs disabled.
Test cased modification:
de step_4 G7 - fixed reference data.
de iges_2 H9 - Fixed reference data. According to input file, there are big tolerance edge and surface, which leads to big tolerance in ref data, result and image has changed due to usage of these shapes instead of omitting them.
de end - changed behavior in case of big isolines, now isolines not break fit command in certain places.
Modeling algorithms:
Fixed 0.0 / 0.0 uncertainty in circle to quasi-angular bspline conversion.
Correction of test cases for issue CR24589
fix the notched edges twice per face - before checking for missing seam and after
Test case correction for issue CR24983
Add check for invalid Surface of linear extrusion (with basis curve - line and extrusion direction parallel to this line) during converting STEP surface
Small corrections of test cases for issue CR24983
Add checks for cone-like surfaces during seam fixing
Delete check for missing degenerated edge for cones in FixMissingSeam() function, because this check is exist in FixPeriodicDegenerated(). Check for uniqueness of wire is unnecessary after this.
Update of test-cases
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
MAIN CHANGES:
FixAddNaturalBound: the boundaries of "natural bound addition" are restricted: a face, that does not contains an outer wire, should not have any infinite UV boundaries due to new face building (with using a surface) requires specified UV boundaries.
FixAddNaturalBound: myResult is updated in FixAddNaturalBound when the method creates a new face with natural boundary. myResult is required to be updated for next "fix small-area wires" algorithm
IsPeriodicConicalLoop: incorrect working BRepTools_WireExplorer was replaced on TopoDS_Iterator.
a natural bound is added to all the faces are constructed with UV-periodical surfaces (not only sphere and torus; e.g., closed b-splines)
other:
ShapeAnalysis: ReverceSeq renamed to ReverseSeq
BRep_Tool Pnt and Tolerance has the check for null TShape
Test cases for issue CR24249
required null checks were added
test cases were corrected according to their new behavior
Correction test case for issue CR24249
