Added DRAW command dsetsignal, resetting OSD signal handler with either armed or disabled FPE handler, according to an option.
If called without arguments, it sets FPE handler only if environment variable OSD_FPE is defined (with value different from 0).
On start, DRAW calls dsetsignal to set FPE signal if CSF_FPE is defined.
Test bugs fclasses bug6143 uses dsetsignal to set FPE handler unconditionally before the test command, and resets it to default at the end.
A number of changes in the code have been done in order to fix floating point exceptions that became generated after enabling signals:
- Global functions Sinh() and Cosh() defined in Standard_Real.hxx are improved to raise Standard_NumericError exception if argument is too big (greater than 710.47586), instead of relying on system treatment of floating point overflow. These functions are used instead of sinh and cosh in ElCLib.cxx.
- Maximal value of parameter on hyperbola is restricted by 23 (corresponding to ~1e10 in 3d) in order to avoid FP overflow in Extrema_GenExtCS.cxx, ShapeFix_EdgeProjAux.cxx.
- Interface of the root curve adaptor class Adaptor3d_Curve has been updated to add new virtual methods BasisCurve and OffsetValue. They complement the adaptor for the case of offset curves. These methods are used in Extrema_GenExtCS.cxx to restrict domain search in the case of offset of hyperbola, in order to get rid of floating point overflow. All classes inheriting Adaptor3d_Curve have been changed to implement the new virtual methods.
- Protection against division by zero has been implemented in ApproxInt_KnotTools.cxx, BRepClass3d_SClassifier.cxx, BRepGProp_Face.cxx, BRepMesh_FastDiscretFace.cxx, Geom2dGcc_Circ2d2TanOnIter.cxx, Geom2dInt_Geom2dCurveTool.cxx, IntPolyh_MaillageAffinage.cxx.
- Protection against calling of math functions of infinite arguments has been added in BRepCheck_Edge.cxx, BRepLib.cxx, CSLib_NormalPolyDef.cxx, Extrema_FuncExtPC.gxx, Extrema_GExtPC.gxx, Extrema_GLocateExtPC.gxx, Intf_InterferencePolygonPolyhedron.gxx, ShapeAnalysis_Surface.cxx, ShapeAnalysis_TransferParametersProj.cxx, ShapeAnalysis_Wire.cxx, math_FunctionSetRoot.cxx.
- Proper initialization of local variables is done in BOPAlgo_PaveFiller_6.cxx, XSDRAWSTLVRML.cxx.
- Inconsistent usage of Standard_Boolean* to access integer data in HLR (caused by #27772) is corrected
Some test cases have been updated to actual state.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
1) BRepMesh_FastDiscretFace.cxx:
- exclude planes from procedure of inserting internal points.
- localize declaration of the container aNewVertices in each method where it is needed.
- correct the logic of the method insertInternalVerticesOther, so that to separate the processes of removing extra points and addition of new points in different cycles, thus making the code more clear and in addition stable.
- insert useful output of intermediate mesh to a file in control() method for debug purposes (with definition DEBUG_MESH).
2) Add global functions MeshTest_DrawTriangles and MeshTest_DrawLinks to draw mesh data in debug session.
3) BRepMesh_FastDiscret:
- in the method Add calculations of deflections have been simplified for non-relative mode.
- replace the attribute MinDist with Deflection in EdgeAttributes structure. Correct its computation so that later to store this value as deflection of the polygon.
4) Make protection against exception in the method BRepMesh_Delaun::addTriangle() when an added triangle creates a third connection of a mesh edge.
5) BRepMesh_EdgeTessellator.cxx, BRepMesh_EdgeTessellationExtractor.cxx: use Geom2dAdaptor_Curve in order to use b-spline cache while computing value on a curve.
6) In BndLib_Box2dCurve::PerformBSpline, avoid creating new b-spline in case of requested parameter range differ from natural bounds insignificantly.
7) In GeomAdaptor classes, postpone building of cache till the time of its actual usage. So, creation of an adapter to compute intervals of continuity does not lead to creation of internal cache.
8) In the methods BRepAdaptor_Curve::Bezier and BSpline do not call Transformed() if transformation is identity.
9) In the classes Geom_BSplineCurve, Geom_BSplineSurface, Geom_BezierCurve, Geom_BezierSurface, Geom2d_BSplineCurve, Geom2d_BezierCurve change the method Pole() to return the point by const reference.
10) In CPnts_AbscissaPoint.cxx, compute derivative by D1 instead of DN to make use of b-spline cache.
11) Change test cases to actual state:
- Number of triangles/nodes can grow due to more accurate work with deflection of edges. Now the edge is tessellated using its own tolerance instead of maximal tolerance of all shapes in the face.
- Accept new numbers of mesh errors (free links, free nodes) for really bad shapes.
- Correct the test "bugs/mesh/bug25612" to produce stable result.
- Disable redundant checks in test cases bug25378* (lower limit for computation time).
- Speed up iso-lines computation for offset of bspline surfaces. For that use adaptor instead of original surface in evaluator of approximation.
- Add output of polylines for debug of insertInternalVerticesOther().
Reference data in test case bugs\moddata_2\bug453_3 have been changed to be close to expected theoretical values. This makes the test give stable result on different platforms.
1) Reduce the number of calls to malloc by grouping requests to larger blocks. To achieve this goal, the following ways are used:
- Containers of types sequence, list and map are initialized with an instance of NCollection_IncAllocator, at this taking care of the time of life of allocated objects, so that not to occupy huge amount of memory.
- Allocation of several arrays having the same and short life time is changed so that to allocate a buffer array of necessary size and to place arrays in this buffer.
2) In BRepMesh_FastDiscretFace, optimize the function filterParameters so that to avoid excess memory allocations.
3) In NCollection_CellFilter, change declaration of the method Reset to accept array by reference rather than by value.
4) Add Allocator() method in map, sequence and vector collection classes by analogy with list collection.
5) Correct the size of block for IncAllocator for x64 platform. In order free-ed block to be returned to the system its size should be at least 1024K on x64 and 512K on x86. This allows to retain free virtual space almost to the state before algorithm run.
6) Decrease amount of memory zeroed by calloc. For that, reduce theIncrement parameter of the embedded vectors of the classes NCollection_UBTreeFiller and BRepMesh_VertexInspector to default value 256.
7) Avoid computing bounding box when not necessary (if no relative deflection is used)
8) Cycles by wires of face using TopExp_Explorer are converted to use TopoDS_Iterator instead.
9) BRepMesh_FastDiscret::Add optimized to avoid storing sequences of faces and edges
10) The tests "mesh standard_* W7" are corrected to accept the new behavior. Earlier the following error took place:
Not connected mesh inside face 9
{12 13}
Now this error was replaced with another one:
free nodes (in pairs: face / node):
{9 12}
Actually it is not a regression, rather improvement, if we look at the snapshot.
11) Change other test cases to their actual state.
Do not insert internal nodes for Cylinder in case if it is less than DefFace value or in case of long cylinder with small radius due to protection against overflow during casting to integer.
Small correction of shape name in test case for issue CR27442
Check deviation of normals at vertices of triangles for complex surface types different from Bezier and BSpline.
Modified test cased according to changes in BRepMesh.
Do not remove more intermediate parameters than N - 3 in order to have at least one parameter related to surface internals.
Check angle for angular deflection before removement of intermediate parameters.
Unify computation of internal vertices for complex surfaces.
Discretization points of edges are taken into account during computation of step of mesh grid.
Remove parameters only if they fit the constrains along the whole surface.
Do not add random internal parameters in case if their number is just 2.
Force freezing parameters both for U and V in case of significant control point.
Modified test cases
Warnings elimination in vc14.
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
Package SortTools and its derived classes are removed; STL sort algorithms are used instead.
Comparator objects are mostly reimplemented as local classes.
New parameter MinSize has been introduced to BRepMesh and GCPnts_TangentialDeflection;
Check length of remaining part of curve for min size parameter instead of distance between two points to avoid large gaps in case highly distorted BSpline surfaces;
Produce fine mesh for sphere and fix other surface;
Test cases for issue CR25378
Correction of test cases for issue CR25378
Compute parameters to produce regular grid and add new internal points according to calculated values.
Use intervals as an additional parameters to determine regular grid for BSpline surfaces.
Test case for issue CR25519
Correction of test case for issue CR25519
Correction of test cases for issue CR25519
Don't create data structures for whole set of faces. Necessary structures are created directly in BRepMesh_FastDiscret.
Don't copy nodes data during scaling, single structure is used.
Remove lines used for debug
Fix sphere: resolve problem came from merging.
Keep code clean - remove unnecessary logic, expected to be used for complicated restoration process.
Test cases for issue CR25364
Fix compilation errors on Linux platform
Squeeze compilation warnings on Linux
Fix regressions
Back RemoveFaceAttribute for further reasons
Fix retrieving of polygon by index
Fix applying of location
Test case for issue CR23106
Fix memory leak regression 'test bugs vis bug79' occurred due to incorrect memory cleaning of inherited objects by MMgtRaw::Free through BRepMesh_IEdgeTool;
Replace BRepMesh_PDiscretRoot by pure pointer to BRepMesh_DiscretRoot;
Fix IVtkOCC_ShapeMesher.
Removed CDL declarations; Data collections are replaced by NCollections; Small code refactoring.
Remove definition of BRepMesh class. Code refactoring of BRepMesh_IncrementalMesh.
Function BRepMesh_Write storing BRepMesh_DataStructureOfDelaun to BRep file is added for debug needs.
Static method BRepMesh_GeomTool::IntLinLin has been added to eliminate code duplications in BRepMesh_Dealun and BRepMesh_CircleTool.
BRepMesh_CircleTool simplified method to find circumcircle.
Fix merging conflicts
Remove redundant function
Fix compilation warning on MacOS
Revert changes occurred during rebase
Resolved merging conflicts
Use parallel flag with BRepMesh_FastDiscret
Test cases for issue CR25039_2
BRepMesh_Classifier: Two-pass approach for intersection check with possibility to run it in parallel mode.
First pass - bounding boxes of segments are checked for overlapping;
Second pass - intersection point is calculated in case if overlapping is detected.
Make NCollection_UBTree::ChangeLastNode() exported due to compilation error on Linux platform.
Reason: method does not depend on template parameters, so it should be available.
Revert previous change and try to use another trick for Linux
Fix compilation warning on MacOS: remove redundant constant
Fix regressions: do not consider insignificant loops in case of self intersections on the same wire.
More sugar solution for compilation errors on NCollection_EBTree on Linux
Test cases for issue CR24968
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Fix compilation error on Linux
Adding test command for this fix
meshPolygon: simplify source polygon by splitting it onto parts without glued edges and loops
Check surrounded triangles during final cleaning of mesh
Correct polygon on frontier edges
Modified test cases in group mesh according to new behavior
Implemented recursive POSIX mutex instead of non-recursive,
Removed SentryNested class, implemented it's features into Sentry class
Added second constructor to Sentry class
SquareConfusion function was created in FoundationClasses module -> TKMath toolkit -> Precision package.
The function returns square of Precision::Confusion().
SquareConfusion function was corrected in FoundationClasses module -> TKMath toolkit -> Precision package.
Squares of Precision::Confusion() were replaced by Precision::SquareConfusion().
Added protection to the function which may have data race (according to the valgrind report).
Added protection to the BRepMesh_FastDiscretFace::RestoreStructureFromTriangulation function
Slight reordering to optimize use of mutex (lock once)
Now Standard_Mutex::SentryNested are created as named object.
Map inside TopTools_MutexForShapeProvider now store Handle_TopoDS_TShape as a key instead of TopoDS_Shape
Class TopTools_MutexForShapeProvider has been created
Class contain methods:
TopTools_MutexForShapeProvider::CreateMutexesForSubShapes - Creates and associates mutexes with each sub-shape of type theType in theShape.
TopTools_MutexForShapeProvider::CreateMutexForShape - Creates and associates mutex with theShape
TopTools_MutexForShapeProvider::GetMutex - Returns pointer to mutex associated with theShape. In case when mutex not found returns NULL.
Added method RemoveAllMutexes to TopTools_MutexForShapeProvider
Assign operator in MutexProvider, constructor and operator and assign operator in Standard_Mutex now private
Replaced TopExp_Explorer with TopoDS_Iterator to avoid cyclic dependence
