Corrections: to use fixed shape as result in the non-manifold mode was made.
Regression was due to using modified initial shape as result in the previous version OCCT. At present initial shape is not modified during ShapeProcessing. Therefore modification to use fixed result was made.
Additionally using of nonManifold flag is added to ShapeProcessing.
Test for 0023838: Standard_OutOfRange in Geom_OffsetSurface::LocalDN (called by BRepFill_PipeShell)
Test for 0023866: GccAna_Circ2d3Tan does not find a circle
Test for 0023925: BRepFeat_SplitShape produces invalid shape
Test for 0023942: Pipe algorithms unrobust to number rounding
Test for 0025385: steep increase in tolerance by intersection
Test for 0025395: SIGSEGV in BRepOffsetAPI_MakeThickSolid
Test for 0025458: can a sweep be used to create 1-fold tori (using a closed wire as path)
Test for 0025478: Fillets can not touch
Test for 0025481: Edge must not contain obsolete curve representations
Test for 0025515: Boolean operation become worse for unknown reason.
Test for 0025521: Fillet creates shell with bad orientation of SubShape
Test for 0025551: BRepMesh can produce internal nodes outside the face interior based on distorted BSpline surface
Test for 0025586: Poor mesh quality, or failure of meshing for closed extruded surfaces with holes
Test for 0025626: Loft of ellipses shows wrinkle near seam edge
Test for 0025628: BRepMesh fails to mesh face with open wire, considered as correct by checkshape
Test for 0025693: Wire of BSplines fails bopcheck
Test for 0025730: result of MakeThickSolid aborts the BOPCheck in Geom_OffsetSurface::SetD0
Test for 0025738: BRepMesh fails to produce correct mesh for the face
Test for 0025776: HLR returns intersecting edges in OutLineV of helical sweep
Test for 0025798: BRepFeat_SplitShape returns invalid result
Test for 0025817: crescent face is not meshed
Test for 0025827: BRepMesh does not synchronize parameters of glued vertices on small edges
Test for 0025837: Bad triangulation when IGES loaded in meters
Test for 0025852: Text to BRep algorithm produces bad faces for circled symbols
Test for 0025856: BRepOffsetAPI_ThruSections returns an invalid shape if one wire contains degenerated edges
Test for 0025879: result of blend fails the bopcheck
Test for 0025967: Shape Healing fails to correct a face with missing poles and pcurves
Test for 0026052: Missing pcurves are computed incorrectly on two connected faces laying on the same surface
Test for 0025061: BRepMesh should skip internal wires with self intersections to produce mesh for the shape anyway
Test for 0024490: Computed surface properties differ substantially depending on NaturalRestriction flag
Test for 0024568: Split shape produces an invalid result
Test for 0024692: fuseedge corruption of spherical edge
Test for 0024772: Intersection of cylinder and cone produces incorrect results
Test for 0024954: BRepBuilderAPI_MakeFace adds wire with aribitary orientation
Test for 0025104: Prism from BSpline curve can not be chamfered
Test for 0025206: Fillet creates edge with C0 continuity
Test for 0025979: fillet creates faces with non-closed wires
Test for 0025983: Fusion of sweep and its mirror invalid
Test for 0025994: Boolean fuse result in invalid result.
Test for 0026034: Result of revolution aborts the bopcheck if translated
Test for 0026077: nurbsconvert of psphere fails the bopargcheck
Test for 0025989: toridial surface gets damaged in STEP export
Protection of the Edge/Edge intersection algorithm (IntTools_EdgeEdge) from incomplete type conversion due to presence of the Trimmed curves by using Adaptors for getting typed curves instead of direct casting.
Test case for the issue.
Methods D0, D1, D2, D3, DN of the class GeomEvaluator_OffsetSurface are extended by additional tweak to compensate failure of normal calculation in degenerated points on triangular surfaces.
If the point where normal has failed to calculate is located on parametric boundary of the base surface, one more attempt is made with the point shifted towards interior by Precision::PConfusion().
STL Reader and Writer tools have been refactored to improve performance and usability:
- Basic reading of STL file is separated to abstract class RWStl_Reader which is not bound to particular data structures; the target data model can be bound via inheritance.
- RWStl package uses class Poly_Triangulation to represent triangular mesh.
- Obsolete data structures and tools (packages StlMesh and StlTransfer) are removed.
Test for 0022602: Improvement in notched healing
Test for 0022750: Boolean operation: Bug in Fuse
Test for 0022821: Crash with BRepFilletAPI_MakeFillet
Test for 0023090: Reading a STEP file produces invalid shape
Test for 0023163: Intersection of tori fails to produce results
Test for 0023343: Crash (ACCESS VIOLATION) in GeomPlate_BuildPlateSurface / MakeApprox if init Surface is set
Test for 0023386: BRepAlgoAPI_Fuse on two disjoint shapes sometimes loses all geometry from one of the shapes
Test for 0023451: FixMissingSeam constructs intersecting wires
Test for 0023497: Units package raises exception for composite units
Test for 0023638: Reading IGES file produced invalid shape
Test for 0023667: checkshape command does not detect problems in the attached shape
Test for 0023671: pload function does not work if DRAWDEFAULT file has win format
Test for 0024185: Wrong projection of a wire to a face
Test for 0024215: Error in offset (bad curve)
Test for 0024251: Command checkshape does not report a problem on first call after fixshape
Test for 0024365: BRepAlgoAPI_Section wrong result, BRepAlgo_Section good result
Test for 0024421: Sewing changes orientations of some subshapes.
Test for 0024429: Cylinder-torus intersection throws an exception and produces no result
AIS_Shape and AIS_ColoredShape now computes Shaded presentation
with UV coordinates if texture mapping is enabled in Drawer.
OpenGl_Context::SetTextureMatrix() - fixed inconsistent handling
of texture cooridnates translation vector.
vtexture command has been extended to handle new arguments:
* -trsfTrans, -trsfScale, -trsfAngle defining transformation matrix
* -setFilter, -setAnisoFilter to setup texture filtering
V3d_View::SetComputedMode() - removed implicit View update.
Graphic3d_CView::SetComputedMode(), ::ReCompute() - fixed
uninitialized bounding box of Computed structure.
PrsMgr_Presentation::Compute() - fixed computation of Computed structure
with transformation within Connected presentation.
StdPrs_HLRPolyShape::Add() now creates Graphic3d_ArrayOfSegments instead of
inefficient Graphic3d_ArrayOfPolylines with boundaries at every segment.
Fixed error in test case bugs/vis/bug24388_1.
DeviceLost flag has been moved from Graphic3d_GraphicDriver to Graphic3d_StructureManager,
so that all Viewers sharing the same Driver instance are properly invalidated.
Fixed clearing of objects by vclear command in case of multiple Viewers.
0. Basic tools for defining classes representing alerts (errors, warnings etc.) and collecting them during execution of algorithms are added in Message package.
1. Refactoring of the Error/Warning reporting system of the algorithms in Boolean Component.
To dump the description of the Error/Warning status of the algorithm the DumpErrors/DumpWarnings method should be called.
Also, the methods GerErrorMsg(int Error) and GetWarningMsg(int Warning) have been implemented to get the description for the given Error/Warning.
All Error/Warning statuses are now listed in the enumeration ErrorStatusEnum/WarningStatusEnum of the algorithm.
It is also possible to get the shapes for which the warning has been set by using the method GetWarningShapes().
2. The new class BOPAlgo_Options has been created to unify the options of the BOPAlgo_* and BRepAlgoAPI* algorithms.
3. The new checks across the algorithms have been added to detect and report errors and warnings.
4. Test cases
boolean bopcut_complex B9 E1 E5 E8
boolean bopfuse_complex B4 B5 C9 D1 D4 D5 D6 D7
have been rewritten to use Cells Builder algorithm instead of Boolean Operations algorithm, because latter always returns error "Unsupported Boolean operation" for these cases.
5. New chapter has been added in the user guide for Boolean Operations - Error / Warning reporting system.
6. Added comment to NCollection_List::Remove(Iterator&)
'BRepTools_History' history was implemented for algorithm
'ShapeUpgrade_UnifySameDomain'.
The history of the changing of the initial shape was corrected to consider all
shapes created by the algorithm as modified shapes instead of generated ones.
The old history interface was replaced by the new one:
- to get the modified shapes use: History()->Modified();
- to check if the shapes has been deleted use: History()->IsRemoved().
New method for building surface polyhedron (class IntCurveSurface_Polyhedron), which takes in account intervals of discontinuity of surface is added for constructor IntCurvesFace_Intersector.
Bug in methods NbU(V)Intervals and U(V)Intervals for Offset surfaces is fixed.
1. Method Approx_ComputeLine::Perform is modified: now it contains also recursive calls after new line computation made by new method ApproxInt_MultiLine::MakeMLOneMorePoint.
2. New method MakeMLOneMorePoint is added to ApproxInt_MultiLine: it builds new sub-line as a part of main line with new point added into the middle of the longest interval between existing points.
3. Method ShapeConstruct_ProjectCurveOnSurface::ApproxPCurve is modified to avoid regressions: now it takes care of the set of initial points to be enough close to each other so that an interval between two adjacent points is less than half-period of the surface.
4. Modification in ShapeConstruct_ProjectCurveOnSurface: correction of pcurves of edges which extremities are in the singularities of surface.
Improve the algorithm BRepPrimAPI_MakeHalfSpace. Earlier it made projection of the point only on faces. If the nearest point does not conform to normal projection criterion the result is wrong. The fix includes search of projection on edges and vertices. This makes the algorithm robust for half spaces with boundaries.
