Test for 0027049: Make non-destructive mode be defined by default in Boolean operations
Test for 0027052: Test boolean gdml_private ZI5 failure
Test for 0027069: IGES parser does not recognize comments in Parameters section
Test for 0027090: Point is classified IN solid but actually it is OUT
Test for 0027170: Reading STEP files produces invalid shapes
Test for 0027186: IGES - reconsider creation of Undefined entity in case of failure
Test for 0027214: Duplicate of test cases
Test for 0027224: Incorrect result of boolean operation in boolean bcut_complex Q1 test case
Test for 0027227: Intersection curve is not continued to the surface boundary
Test for 0027246: ShapeFix_Shape destroys shape
Test for 0027251: Shape becomes invalid when exported to STEP and imported back
Test for 0027316: exception when XAddShape
Test for 0027378: BRepLib_MakeFace produces invalid faces on periodic surfaces in case the given parametrization does not match the default
Test for 0027390: Box and Ellipsoid shape boolean cut and common introduce invalid result.
Test for 0028119: Blend fails on fused identical but shifted tori
Test for 0028144: Step reader - regression in comparison of version OCCT654
Test for 0028151: Sewing faces results in a shell with very big tolerance
Test for 0027160: Weird results of the pipe algorithm
Test for 0027623: Cannot find intersection line between two trimmed planar surfaces
Test for 0027683: Inaccurate result by bopcut
Test for 0027687: Section between shells of hull and deck is not closed
Test for 0027711: Blend-on-blend corrupts the shape
Test for 0027784: Thickness fails on cylinder with draft
Test for 0027908: Exception during offset computation
Test for 0027909: Exception during offset computation
Test for 0027910: Sharing between edges was lost after offset operation
Test for 0027911: Exception during offset computation
Test for 0027912: Exception during offset computation
Test for 0027928: BOP common produces empty compound
Test for 0027948: Cut produces unexcpected shape
Test for 0027950: Result of intersection algorithm depends too much on surface trim bounds
Test for 0027701: Crash when export empty solid to STEP
Test for 0027722: STEP error for Ellipse revol shape
Corrections: to use fixed shape as result in the non-manifold mode was made.
Regression was due to using modified initial shape as result in the previous version OCCT. At present initial shape is not modified during ShapeProcessing. Therefore modification to use fixed result was made.
Additionally using of nonManifold flag is added to ShapeProcessing.
Test for 0023838: Standard_OutOfRange in Geom_OffsetSurface::LocalDN (called by BRepFill_PipeShell)
Test for 0023866: GccAna_Circ2d3Tan does not find a circle
Test for 0023925: BRepFeat_SplitShape produces invalid shape
Test for 0023942: Pipe algorithms unrobust to number rounding
Test for 0025385: steep increase in tolerance by intersection
Test for 0025395: SIGSEGV in BRepOffsetAPI_MakeThickSolid
Test for 0025458: can a sweep be used to create 1-fold tori (using a closed wire as path)
Test for 0025478: Fillets can not touch
Test for 0025481: Edge must not contain obsolete curve representations
Test for 0025515: Boolean operation become worse for unknown reason.
Test for 0025521: Fillet creates shell with bad orientation of SubShape
Test for 0025551: BRepMesh can produce internal nodes outside the face interior based on distorted BSpline surface
Test for 0025586: Poor mesh quality, or failure of meshing for closed extruded surfaces with holes
Test for 0025626: Loft of ellipses shows wrinkle near seam edge
Test for 0025628: BRepMesh fails to mesh face with open wire, considered as correct by checkshape
Test for 0025693: Wire of BSplines fails bopcheck
Test for 0025730: result of MakeThickSolid aborts the BOPCheck in Geom_OffsetSurface::SetD0
Test for 0025738: BRepMesh fails to produce correct mesh for the face
Test for 0025776: HLR returns intersecting edges in OutLineV of helical sweep
Test for 0025798: BRepFeat_SplitShape returns invalid result
Test for 0025817: crescent face is not meshed
Test for 0025827: BRepMesh does not synchronize parameters of glued vertices on small edges
Test for 0025837: Bad triangulation when IGES loaded in meters
Test for 0025852: Text to BRep algorithm produces bad faces for circled symbols
Test for 0025856: BRepOffsetAPI_ThruSections returns an invalid shape if one wire contains degenerated edges
Test for 0025879: result of blend fails the bopcheck
Test for 0025967: Shape Healing fails to correct a face with missing poles and pcurves
Test for 0026052: Missing pcurves are computed incorrectly on two connected faces laying on the same surface
Test for 0025061: BRepMesh should skip internal wires with self intersections to produce mesh for the shape anyway
Test for 0024490: Computed surface properties differ substantially depending on NaturalRestriction flag
Test for 0024568: Split shape produces an invalid result
Test for 0024692: fuseedge corruption of spherical edge
Test for 0024772: Intersection of cylinder and cone produces incorrect results
Test for 0024954: BRepBuilderAPI_MakeFace adds wire with aribitary orientation
Test for 0025104: Prism from BSpline curve can not be chamfered
Test for 0025206: Fillet creates edge with C0 continuity
Test for 0025979: fillet creates faces with non-closed wires
Test for 0025983: Fusion of sweep and its mirror invalid
Test for 0025994: Boolean fuse result in invalid result.
Test for 0026034: Result of revolution aborts the bopcheck if translated
Test for 0026077: nurbsconvert of psphere fails the bopargcheck
Test for 0025989: toridial surface gets damaged in STEP export
Test for 0022602: Improvement in notched healing
Test for 0022750: Boolean operation: Bug in Fuse
Test for 0022821: Crash with BRepFilletAPI_MakeFillet
Test for 0023090: Reading a STEP file produces invalid shape
Test for 0023163: Intersection of tori fails to produce results
Test for 0023343: Crash (ACCESS VIOLATION) in GeomPlate_BuildPlateSurface / MakeApprox if init Surface is set
Test for 0023386: BRepAlgoAPI_Fuse on two disjoint shapes sometimes loses all geometry from one of the shapes
Test for 0023451: FixMissingSeam constructs intersecting wires
Test for 0023497: Units package raises exception for composite units
Test for 0023638: Reading IGES file produced invalid shape
Test for 0023667: checkshape command does not detect problems in the attached shape
Test for 0023671: pload function does not work if DRAWDEFAULT file has win format
Test for 0024185: Wrong projection of a wire to a face
Test for 0024215: Error in offset (bad curve)
Test for 0024251: Command checkshape does not report a problem on first call after fixshape
Test for 0024365: BRepAlgoAPI_Section wrong result, BRepAlgo_Section good result
Test for 0024421: Sewing changes orientations of some subshapes.
Test for 0024429: Cylinder-torus intersection throws an exception and produces no result
New method for building surface polyhedron (class IntCurveSurface_Polyhedron), which takes in account intervals of discontinuity of surface is added for constructor IntCurvesFace_Intersector.
Bug in methods NbU(V)Intervals and U(V)Intervals for Offset surfaces is fixed.
1. The packages *QANewModTopOpe*, *QANewBRepNaming* and *QANewDBRepNaming* have been removed as containing obsolete features.
The corresponding QA commands (such as OCC252, OCC307 and OCC294) and test cases have also been removed.
2. The QA command buc60609 has been removed. The corresponding test case bugs/moddata_1/buc60609 has been rewritten using b2dclassify command.
StepVisual_StyledItem::Item() now does not call IsKind() on NULL object.
Add several checks for NULL to import/export.
Add test case bugs/step/bug28147
Exception is raised during translation BSpline curve having only one unique knot.
Protection for such case was added
Added protection against exception during reading BSpline curve with number of control points equal to 0
Added protection against exception due to using null binder during writing XDE document
Test case for issue #27575
The reason of exception has been eliminated.
Creation of the test case for this issue.
Correction of unstable test case.
Some test cases have been adjusted according to their new behavior.
Add check for datum position during export of datum_system
Add Draw commands for set/get datum position
update test cases
Correction of case bugs/step/bug27313
Add special parameter, which allow reading of all top level (not shared by any other entities) solids (manifold_solid_brep) and shells (shell_based_surface_model).
The examples how to use a new parameter:
DRAW:
switch on a parameter:
param read.step.all.shapes On
update model to apply new parameter value:
newmodel
read as usual:
stepread test.stp res * // each top level solid or shell will be read as res_i shape.
or
ReadStep Doc test.stp
CXX Code:
switch on a parameter:
Interface_Static::SetIVal("read.step.all.shapes", 1);
read as usual
Add method for exact calculation of bounding boxes
Modifications made according to remarks.
Small correction of test case for issue CR27352
Small correction of test cases for issue CR27352
Avoid warning on VS2015
The cause of errors is a non alphabetical order of complex entity, which do not affect export.
Move messages to debug mode.
Replace fail by warning.
Correction of test case bugs/vis/bug23153 according to the new behavior
Do ProcessShape for non-manifold too,
Add binding of already written shared faces to STEP entity for non-manifold.
Minor correction of test case bugs/step/bug27329
Modification to create natural bounds for face based on the spherical and Bspline surface and having only one bound represented by Vertex loop was made.
According to the specification of ISO-10303 part 42:
"If the face has only one bound and this is of type vertex_loop, then the interior of the face is the domain of the face_surface.face_geometry. In such a case the underlying surface shall be closed (e.g. a spherical_surface.)"
- natural bounds are applied only in case if VertexLoop is only the one
defined face bound.
Update of test-cases according to the new behavior
Test-case for issue #24595
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
Make modification to save in the file part of the XCAF document starting from specified label.
If specified label is component of the high-level assembly then high-level assembly is saved in document with one specified component.
In other case only part of the document starting from the specified label is saved.
Modification of the translation of the face based on the toroidal surface with negative major radius was made.
Seems that such face is considered by "Solid Works" and "ProE wildfire 5.0" systems as face having reversed orientation.
This step file was written by "Solid Works 2014".
Test case for issue CR26376
Exception is raised during reading step file containing p-curve having not-unique last knot.
Modification correcting misprint during computation new numbers of poles for such case was made in the file StepToGeom_MakeBSplineCurve.pxx
Protection against exception was made in the file StepToTopoDS/StepToTopoDS_TranslateEdge.cxx.
Warning message was added in the file StepToTopoDS_TranslateEdgeLoop.cxx.
Test case for issue CR26289
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
add check for edges with null 2D and 3D curves for STEP,
for IGES problem exists only with wires, where non-invalid edge is only one, and it is not the last in wire(fixed).
Test case for issue CR25843
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
New features:
1. class BRepCheck_Solid
The class is to check a solid per se.
The scan area is:
i. Shells that overlaps each other
Status: BRepCheck_InvalidImbricationOfShells
ii. Detached parts of the solid (vertices, edges)
that have non-internal orientation
Status: BRepCheck_BadOrientationOfSubshape
iii. For closed, non-internal shells:
iii.1 Shells containing entities of the solid that
are outside towards the shells
Status: BRepCheck_SubshapeNotInShape
iii.2 Shells that encloses other Shells
(for non-holes)
Status: BRepCheck_EnclosedRegion
Changes:
1. enumeration BRepCheck_Status
members:
InvalidImbricationOfShells,
EnclosedRegion,
has been added
2. class BRepCheck
method:
void BRepCheck::Print(const BRepCheck_Status stat,
Standard_OStream& OS)
has been modified to take into account II.1
3. class BRepCheck_Analyzer
method:
void BRepCheck_Analyzer::Put(const TopoDS_Shape& S,
const Standard_Boolean B)
has been modified to take into account I.1
4. class BRepTest
function:
void StructuralDump(Draw_Interpretor& theCommands,
const BRepCheck_Analyzer &theAna,
const Standard_CString ShName,
const Standard_CString Pref,
const TopoDS_Shape &theShape)
has been modified to take into account I.1, II.1
Test cases for issue CR25509
Correction of test cases for issue CR25509
OSD_OpenFile.hxx header is created for using in file open operations with Unicode names.
Fix for STEP files reading.
Adding test cases for issue 25367
Update test case for issue 25364
Update test cases due to improvements
Allow GEOMETRIC_SET entity to accept GeometricRepresentationItem children
Modification to avoid cyclic dependency between STEPControl and StepToTopoDS packages
Test cases for issue CR25166
