ApproxInt_Approx, ApproxInt_KnotTools, BRepApprox_Approx,
GeomInt_IntSS, IntTools_FaceFace:
Analysis of curvature is added for adjusting ParametrizationType
IntPatch_Intersection.cxx - adding methods for estimation of UV max step depending on used surfaces
GeomInt_IntSS.cxx, IntTools_FaceFace.cxx - using methods for max step estimation
Approx_SameParameter.cxx - adding control against big values.
BOPAlgo_PaveFiller_6.cxx - adjusting position of faces before intersection
Improved the test stability: created 10 iterations of measurements and take the minimum to
minimize the affect of other processes and threads; increased the compare range of
the quarter and the whole of the document load.
Do not limit the normalization factor of the highly anisotropic parametric space when filtering start points in the algorithm of walking line construction.
Additionally check the knots are in the increasing orders when merging two B-spline curves
Add the case of closed, smooth but not periodic surface (unification of faces lying on it if the flag "myConcatBSplines" is true - modify the underlying surface to make it periodic).
Add more faces for intersection in rebuilding process basing on the connection of the splits of offset faces (special treatment for the artificially invalid faces).
When rebuilding faces add vertices common for faces for trimming the new intersection edges.
Adjust existing and create new test cases.
A flag not to raise an exception is used on reading of an XCAF document. If such a shape with scaling transformation is stored in the document, it should be read.
- Added getting and setting Material, VisMaterial and Props to XCAFDoc_Editor::Expand.
- Added XCAFDoc_Editor::Extract to transfer part to a new location
- XCAFDoc_Editor::Extract allows to extract a part as a component or simply extract to an empty label with attached colors, layers, materials, vismaterials and props
- Added XCAFDoc_Editor::CloneMetaData to clone shape's attributes to new location
- Added XCAFDoc_Editor::CloneShapeLabel to clone shape to new document
- Added XCAFDoc_DocumentTool::Check*Tool methods to check an existing of an any tool
- Protected against creating a new label for non-existent tools via extract or expand process
move algorithm of obtaining results from function gproject to method ProjLib_CompProjectedCurve::Perform;
fix tolerances in ProjLib_PrjResolve::ProjLib_PrjResolve;
new treatment of myMaxDist;
use extend bounds in approximation;
add test;
test case "bugs modalg_5 bug25980", "bugs modalg_7 bug24185" have been changed according to new behavior.
incmesh - added -prs option to use StdPrs_ToolTriangulatedShape::GetDeflection() as meshing parameters.
vdisplay, XDisplay - added -autoTriangulation option to manage meshing behavior before displaying a shape.
trinfo - added output of meshing parameters.
Fixed broken incmesh syntax usage in several test cases.
Correct local function ReconstructMissedSeam: use copy of existing pcurve for seam edge reconstruction to prevent possible corruption of another edges.
Fixed a problem with handling slashes and apostrophes
Changed cleaning of the 'TEXT' fields of the step entity to direct order w/o removing operations
Changed converting text locale to covert before cleaning directives and specials symbols (all directives and sp. symbols encoded in ASCII[0-125] and haven't any differ with any locals)
Special case, when directives have two slashes before name changed to don't handle directives value and converts as is (combine two slashes as one and write, for example "\\X2\00C3" as "X2\00C3")
Corrected Geom2dConvert_CompCurveToBSplineCurve::Add in Geom2dConvert_CompCurveToBSplineCurve.cxx;
Added the test for this problem;
Corrected "gluing" curves in ProjLib_ProjectedCurve.cxx.
RWGltf_GltfJsonParser::gltfParseSceneNode() - prevent flattering of Scene nodes
(allow flattering only of Mesh nodes).
Added command XAutoNaming managing XCAFDoc_ShapeTool::SetAutoNaming().
Added comparisons with reference Xdump data to glTF tests.
Fixed exception when trying to calculate line and edge normal in methods HLRBRep_Data::OrientOutLine and HLRBRep_Data::OrientOthEdge, added a check for the existence of the normal before subsequent calculations. A correct check for zero derivative, correction of floating point error and division by zero determinant directly in HLRBRep_EdgeFaceTool::CurvatureValue was set.
1. Correct local function TransformPCurves of ShapeUpgrade_UnifySameDomain: take into account the case of seam edge.
2. Correct local function ReconstructMissedSeam of ShapeUpgrade_UnifySameDomain: use previously stored seam edge in some cases.
BRepTools/BRepTools_NurbsConvertModification.cxx -
Checking domain of 2dCurves if surfaces are periodic is improved
tests/bugs/moddata_3/bug32557 - test case added
IntPatch/IntPatch_WLineTool.cxx - adding control of maximal ratio of distances between 3 sequential points.
tests/bugs/modalg_7/bug32569 - new test case added
tests/lowalgos/intss/bug29972_1 test case is modified according new behavior of intersection algorithm
Update information about ON/IN sub-shapes for all touched faces when intersection with shapes of lower types (edges and vertices) complete.
Previously only the faces participating in the Face/Face intersection were updated.
Added method V3d_View::SetImageBasedLighting() for managing IBL.
OpenGl_View implementation has been revised to handle IBL updates in a more straightforward way,
Added new elliptical gradient fill method and updated vbackground command.
Renamed enum values of Aspect_GradientFillMethod and defined aliases for old ones.
Changed draw mode in OpenGl_BackgroundArray from triangle-strip to GL_TRIANGLES.
Modified the method void RWStepGeom_RWBSplineSurfaceWithKnotsAndRationalBSplineSurface::ReadStep
Added processing B spline surface with knots and rational B spline surface with empty data in the name field
Added test
Before removal of the part make sure that it was not filled due to overlapping of opposite parts.
Improve procedure of checking for inverted edges by taking into account that the original edges may not be connected.
Correct test case offset/shape_type_i_c/YL5, as it was working incorrectly - some parts were missing.
BRepTools/BRepTools_WireExplorer.cxx - replace MapOfShape vmap by IndexedMapOfShape
to avoid random behavior of algorithm
bugs/moddata_3/bug30422 - new test case added
Modified the method TopoDSToStep_MakeStepFace::Init
Added processing of degenerate toroidal surfaces, which are the base surfaces of offset surfaces
Added test
0030620: Tests - perf/bop/buildfaces does not match description (broken)
Allow using meaningful parameters for the commands bbop and bapibop:
* common - for Common operation
* fuse - for Fuse operation
* cut - for Cut operation
* tuc/cut21 - for Cut21 operation
* section - for Section operation
Add description for the commands dealing with Boolean/GF/Split operations.
Validate arguments of these commands.
Correct test case perf/bop/buildfaces to perform GF execution in parallel and serial modes - compare the results.
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
