1. Algorithm of Restriction line processing has been improved in IntTools_FaceFace.cxx file.
2. Algorithm of checking, if Restriction line and Walking line are coincided has been improved in IntPatch_ImpPrmIntersection.cxx file.
3. Algorithm of extending check if starting point of Walking line is a tangent point has been added.
Small correction of some test cases.
Creation of test case for issue #0026699.
Small correction of test case for issue CR26699
The main reason of the bug is incorrect extending line in SeveralWlinesProcessing(...) function.
Additionally, interface of IntPatch_WLine::Dump(...) method has been changed.
Change some test cases according to their new behavior.
Test-case for issue #26621
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
1. JoinWLines algorithm has been improved.
2. Reference to the V-boundaries is deleted when computing step.
3. Decreasing the tolerance when computing parameters of WLine.
4. Adding boundary point is forbidden if it lies in prolongation of found ones.
5. Possible reason of exception has been eliminated.
6. Processing of critical point has been improved.
Test cases for this issue have been created.
Correction of some test case(s).
Test case bugs/modalg_6/bug26310_4 is added
Update of test-cases for issue #26310
Adaptations for compiling with GCC 4.7 and 4.8:
- Construction semantics is used for Handle objects being initialized by const Handle objects of derived type, to avoid overload resolution error in GCC 4.7.
- Missing includes added.
- Fixed bugs related to misuse of direct casts of handle.
- Eliminate CLang warnings on uninitialized and unused variables, functions, and expressions
Test commands for checking performance and functionality of OCCT handles and RTTI added.
New test case added for that: test perf fclasses handle.
Implementation of opencascade::handle improved to enable compile-time error if two handles of incompatible types are compared.
Comparison of handle to NULL is not possible any more; method IsNull() should be used instead.
Method LDOM_MemManager::Doc() is removed to avoid cyclic dependency of headers; constructor of LDOM_Document(LDOM_MemManager&) is used directly instead.
Inclusion of headers corrected for compilation after previous patch.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
1. Conditions for adjusting and for breaking Walking-lines have been amended.
2. Processing of case when WLine should be broken has been changed.
Test cases for issues 26193 and 26208 have been added
Cosmetic correction of test-cases
Modification of test-case according to the new behavior.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
1. Algorithm of aStepU1 computing was changed.
2. Interface to allow convert gp_XY(Z) to the math_Vector has been added.
3. Algorithm of point in V-boundaries computing has been changed.
4. Situation when intersection line walks along V-boundary of cylinder(s) is processed better.
5. Intersection lines are created with their individual step along U1 parameter.
6. Points processing has been moved to the assembly level.
7. Extend output of "bfuseblend" and "bcutblend" DRAW-command.
8. New option for "bfuseblend" and "bcutblend" command has been added.
Update Test cases
Test cases for issue CR25742
1. Restriction line is processed in IntTools_FaceFace with using methods of GeomInt_IntSS class.
2. Check, if Restriction- and Walking-lines (or Restriction-Restriction lines) are coincided, has been added in IntPatch_ImpPrmIntersection.cxx (at that RLine is considered to be isoline only).
3. Check, if RLine and GLine are coincided, has been added in IntPatch_ImpImpIntersection.cxx.
4. Create new class IntPatch_PointLine, which is inherited from IntPatch_Line.
5. The reason of exception (in DEBUG MODE) has been eliminated.
New test cases for issue #25416 were added.
tests/bugs/modalg_5/bug24650 was modified.
If Walking-lines are coincided we kept line, which contains more points or has more length (because it is more precisely, most likely).
Test cases for issue CR25828
Some test cases were changed
1. Algorithm of adjusting parameter to the surface boundaries has been changed.
2. Control First and Last parameters in BRepLib_CheckCurveOnSurface::Compute() function.
Test cases for issue CR25819
1. Curve boundaries were more precised.
2. Some test cases were changed in accordance of their new behavior.
3. Code fragment for WLines joining was moved to higher level (for more universal using in the future).
Code was changed in accordance with the last remark.
Added test cases bugs/modalg_5/bug25715_1 bug25715_2 bug25715_3
The empty copy constructor, assignemnts operator, default constructors added to the following classes:
The following classes use “new” function without Handles:
- Select3D_PointData
- BSB_T3Bits
- IntPatch_InfoPD
- LDOM_StringElem
- BinomAllocator
- ProjLib_OnSurface
- Standard_MMgrFactory
Useless declaration of default constructor have been deleted.
1. Dump of WLine is shown with more precise.
2. Equation solving with more precise.
3. Dump of Multy-line.
4. Code optimization.
Some test cases were updated in accordance with their new behaviour.
Correction of test cases for issue CR25531
1. Function IsSame(...) for IntSurf_PntOn2S was added (see IntSurf_PntOn2S.cdl for detail information).
2. Inserting additional points is forbidden if existing WLine contains only two points coincided.
Test-case for issue #25488
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Existing method of Cylinder-Cylinder intersection computing is based on finding the analytic line (as a function of one argument) and converting one into the walking-line with set of equidistant (along the line parameter) points.
The main advantage of applied method is using adaptively computed step. Necessary step is computed into every point of the obtained walking-line. At that we receive final walking-line directly (without preliminary analytic line) and we determine moments more precisely, when it should be split (see IntPatch_ImpImpIntersection_4.gxx).
The main disadvantages is bad working this method for non-trimmed cylinders (with infinite bounds), because step value is depend on the boundaries values.
More over, new method always returns walking-line, while intersection result can be an analytic curve (lines, circle, ellipse). That is NO good. Therefore, analytic curve is computed by existing method.
In conclusion, in spite of covering almost all more often meeting cases, new method has limited application. Then we should use the existing old method.
Additionally, method MinMax() is added (see Standard_Real.hxx file). It uses into new algorithm.
Some test cases is changed according to their new behavior.
Test case for issue CR24915 is added.
Into GeometryTest_APICommands.cxx only tabulations were chaged.
"Extending" of isolines (see Geom2dHatch_Hatcher.cxx).
Small correction of test case for issue CR24915.
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
Generic classes from "AppParCurves" package:
"AppDef_SmoothCriterion", "AppDef_LinearCriteria" and "AppDef_Variational" moved to the corresponding non-generic classes "AppDef_SmoothCriterion", "AppDef_LinearCriteria" and "AppDef_Variational" to "AppDef" package. Also several "*.cxx" files of "AppDef_Variational" class merged to one ".cxx".
Generic class from "IntImp" package:
"IntImp_ZerCOnSSParFunc" moved to the corresponding non-generic class "IntPatch_CSFunction" to "IntPatch" package.
Next unused generic classes were removed:
- IntCurveSurface_SurfaceTool
- Intf_InterferencePolygon3d
And some other minor changes.
1) Generic class "Intf_InterferencePolyhedron" from "Intf" package converted to the non-generic class and moved to the "IntPatch" package. Name of this class was changed to "IntPatch_InterferencePolyhedron".
2) Generic class "MoniTool_Elem" from "MoniTool" package converted to the non-generic class "MoniTool_TransientElem".
3) Generic class "IntWalk_PWalking" from "IntWalk" package converted to the non-generic class. And internal class "TheInt2S" of "IntWalk_PWalking" moved from IntWalk_PWalking.cdl to IntWalk.cdl for correct building. Also several "*.cxx" files of this class merged to one ".cxx".
4) Generic class "Transfer_SimpleBinder" from "Transfer" package converted to the non-generic class and moved to the "TransferBRep" package. Name of this class was changed to "TransferBRep_BinderOfShape".
5) Generic class "Geom2dInt_CurveTool" from "Geom2dInt" package converted to the non-generic class "Geom2dInt_Geom2dCurveTool".
6) Generic class "MAT2d_BisectingLocus" from "MAT2d" package converted to the non-generic class and moved to the "BRepMAT2d" package. Name of this class was changed to "BRepMAT2d_BisectingLocus".
7) Generic class "MAT_Mat" from "MAT" package converted to the non-generic class and moved to the "MAT2d" package. Name of this class was changed to "MAT2d_Mat2d".
