Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
- Toolchain file to configure a Visual Studio generator for a Windows 10 Universal Application was added (CMake).
- There is no support for environment variables in UWP.
- SID is not supported (were excluded).
- Windows registry is not supported (were excluded).
- Mess with usage of Unicode/ANSI was corrected.
- Added sample to check UWP functionality.
- Excluded usage of methods with Unicode characters where it is possible.
- Minor corrections to allow building OCAF (except TKVCAF) and DE (except VRML and XDE)
- Building of unsupported modules for UWP platform is off by default .
- Checking of DataExchange functionality was added to XAML (UWP) sample.
- Added information about UWP to the documentation.
- Update of results of merge with issue 27801
- Ensure that the subshapes from the original shape will not be changed after nurbsconvert operation.
For that create the new vertexes (NewPoint(..)) as well as new curves (NewCurve(..)) and new surfaces (NewSurface(..)) before calling of Rebuild() method. Make copies of all vertexes impacted by curve or surface modifications. This eliminates necessity of creation of new vertices during recursive rebuilding of the entire shape.
- Compatibility with the old behavior of BRepTools_Modifier has been retained as an option. For that the new flag MutableInput has been added in the interface of the class.
- This patch also impacts other operations based on BRepTools_Modifier, in the sense that they also become safe regarding input shapes.
- Create new test cases. Some test cases with nurbsconvert command are changed to lock input shapes from modifications.
fix regressions
Add check on empty topological containers.
Add empty shapes to the replacement map.
Add Draw command for Re-Shape.
Add a test grid for reshape with a single use case for starters.
Added set of methods CopyVertex in BRepTools_ReShape. Usage of this non-modifying methods added in ShapeFix_Wire, ShapeFix_Edge.
Test case for issue 26656.
Test cases updated to the new behavior.
Correction of test cases for issue CR26656
Changed access by value to access by reference in method CopyVertex.
1) Macro definition WNT replaced by _WIN32 and _MSC_VER for platform and compiler detection accordingly.
2) Macro definition LIN replaced by __linux__ macro.
3) Macro definition DEB replaced by OCCT_DEBUG macro.
* The possibility to copy mesh is implemented. It may be enabled by copyMesh flag, by default it is disabled.
* Poly_Triangulation::Copy() method is added.
* The mesh is copied if and only if copyMesh flag is true.
Test commands for checking performance and functionality of OCCT handles and RTTI added.
New test case added for that: test perf fclasses handle.
Implementation of opencascade::handle improved to enable compile-time error if two handles of incompatible types are compared.
Comparison of handle to NULL is not possible any more; method IsNull() should be used instead.
Method LDOM_MemManager::Doc() is removed to avoid cyclic dependency of headers; constructor of LDOM_Document(LDOM_MemManager&) is used directly instead.
Inclusion of headers corrected for compilation after previous patch.
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
Forward declaration of TCollection instances as classes are replaced by inclusion of corresponding header.
Cyclic dependencies between declaration of collection class and its item are resolved by forward declaring a class in collection header.
Set the value of flag Frozen to false for shape created in BRepTools_Modifier. If shape is not newly created then value of flag Frozen don't changed.
Test-case for issue #21727
1. Using of the "Closed" flag was unified:
a) this flag is applicable for TopoDS_Wire and TopoDS_Shell only, because these entities may hedge an area in 2D space or a volume in 3D space correspondingly;
b) other types of TopoDS shapes are passing over this flag;
c) changing of this flag should be controlled by high-level algorithms (not BRep_Builder).
2. Implemented verification of the closedness of edges. An edge is closed if and only if its first and last vertices are the same.
3. Test cases were changed according to new behavior.
OSD_OpenFile.hxx header is created for using in file open operations with Unicode names.
Fix for STEP files reading.
Adding test cases for issue 25367
Update test case for issue 25364
Update test cases due to improvements
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
Method BRep_Tool::IsClosed() extended to analyze closure of wires in addition to shells and solids.
External and Internal edges and vertices are ignored in this check.
Analysis of compounds is disabled.
Update of flag Closed according to actual state is added in most places where new shells are constructed.
Draw-command and test case for issue CR25202
Reading of .brep is slow down on VS2011 due to problems in realization reading ASCII strings to real. Implementation of dedicated function for reading of reals was implemented
Mostly duplicated comments were removed and missing ones were moved
into dedicated class CDL files.
Some more duplicated comments were removed from CDL files.
Correction of merge
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
Minor correction of #include to avoid dependency of package Draw on DBRep (problem building by WOK).
License statements in new files corrected for licensecheck command.
Non-ascii en-dash symbol repleced by Ascii hyphen in debug.md.
Global functions are added to allow a user performing DRAW commands from VS Command Window when DRAW is interrupted on a breakpoint.
Previously existing functions are adapted to work with Visual Studio debugger (Command Window).
A manual describing use of these functions and other debugging facilities and some hints is added to Developer Guides.
Minor corrections and refinement of debug.md.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Added test case bugs/modalg_5/bug24204
Modified following test cases:
bugs modalg_3 bug605 - case with bad input data, command "settolerance w1 1.e-7" was added;
bugs modalg_4 bug629 - wrong case, now the algorithm can not build pipes on such profiles, test case was removed;
bugs modalg_4 bug13595_1, bug13595_1 - number of subshapes was has changed;
bugs modalg_5 bug23706_2 - square of resulting face was changed;
bugs modalg_5 bug23870_1, bug23870_2, bug23870_3, bug23870_4, bug23870_5 - the number of subshapes was changed.
Resolved some C4702 (unreachable code) and C4127 (conditional expression is constant).
small corrections in NoSuchObject invoking.
Macros names changing, deadcode deleting, re-writing "for" loops into equivalent "if" structures.
changed condition in "if" block, deadcode deleted.
Small changes in else statement.
List of resolved warnings:
c4063: Aspect.cdl; TObj_Application.cxx; PCDM.cdl; OpenGl_Workspace_5.cxx;
c4100: XDEDRAW.cxx; ViewerTest_ViewerCommands.cxx; TopOpeBRep_FacesFiller_1.cxx; TopClass_Classifier3d.gxx; TDataStd_ReferenceArray.cxx; QABugs_19.cxx; IntPatch_ImpImpIntersection_5.gxx; HLRTopoBRep_DSFiller.cxx; HLRBRep_Data.lxx; DPrsStd_AISPresentationCommands.cxx; BRepMesh_Delaun.cxx;
c4127: BOPTools_AlgoTools2D.cxx; MAT_Mat.gxx; GeomFill_SweepSectionGenerator.cxx; BRepMesh_Delaun.cxx;
c4189: IntCurveSurface_Inter.gxx; IGESToBRep_BRepEntity.cxx; BRepMesh_Delaun.cxx; BRepAlgo_Loop.cxx; IntStart_SearchOnBoundaries_1.gxx;
c4190: Plugin_Macro.hxx;
c4389: Visual3d_View.cxx; TopOpeBRep/TopOpeBRep_vpr.cxx; TDataStd_BooleanArray.cxx; IntPatch_ALine.cxx;
c4701: BRepAlgo.cxx;
c4702: MNaming_NamingRetrievalDriver_1.cxx; MNaming_NamingRetrievalDriver_2.cxx; BRepClass3d_SolidExplorer.cxx;
c4706: TestTopOpe_BOOP.cxx;
Additional fixes:
- old-style declarations of C functions in IGES and STEP parsers
- clean-up of debug code, fixes for building in Debug mode
- in BRepFill_TrimShellCorner.cxx, lines 878-9, wrong use of assignment instead of comparison fixed
- fix for Plugin_Macro reverted; warning 4190 disabled instead
- in IntPatch_ALine.cxx, line 520, wrong comparison of boolean with index fixed
- in InterfaceGraphic_Visual3d.hxx, field IsCustomMatrix made boolean
- in TopOpeBRepBuild_ShapeSet, obsolete (unused) methods removed
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
