Possibility for adding LengthUnit info to XCAF document using special class XCAFDoc_LenghtUnit and XCAFDoc_LenghtUnitTool is implemented.
Package UnitsMethods is split: geom methods were placed to new file GeomConvert_Units which is in the toolkit TKXSBase, internal step scale factors was placed to StepData.
Updated UnitMethods to convert scale factor to different unit types.
Now, XSAlgo::XSAlgo_AlgoContainer is used to update unit info from static interface values.
New Draw command "XSetLengthUnit" and "XGetLengthUnit" for set or get XDE attribute.
Upgraded tests for STEP, IGES, OBJ, glTF, VRML formats to check area regressing with used unit.
Upgraded tests\de test cases to use any units in the "loop back" algorithms.
For small edges fully covered by tolerances of vertices BSpline periodic curves are converted to not periodic BSpline curves by cutting segment before writing.
In the class TopoDSToStep_MakeStepEdge permute of edge vertices for closed curves was added for the case when the range obtained from the vertex projection contradicts the edge range in order to avoid computation of the invalid edge range after reading.
Second test script for bug 0031301
The table of named colors has been compressed and moved out
from Quantity_Color.cxx into Quantity_ColorTable.pxx.
Quantity_NameOfColor - grayscale enumeration values have been re-ordered to fix discontinuity.
Duplicating colors has been merged within enumeration:
CHARTREUSE=CHARTREUSE1, GOLD=GOLD1, GREEN=GREEN1, ORANGE=ORANGE1,
ORANGERED=ORANGERED1, RED=RED1, TOMATO=TOMATO1, YELLOW=YELLOW1.
Added aliases to several other common colors:
BLUE=BLUE1, CYAN=CYAN1, LIGHTCYAN=LIGHTCYAN1, MAGENTA=MAGENTA1.
Quantity_Color class definition has been cleaned to follow OCCT coding style.
Quantity_Color now stores NCollection_Vec3<float> as class field instead of separate components.
Removed unused class Quantity_ColorDefinitionError.
New methods Quantity_Color::Convert_LinearRGB_To_sRGB() and Quantity_Color::Convert_sRGB_To_LinearRGB()
converting RGB components from linear to non-linear sRGB colorspace and vice versa.
Image_PixMap::PixelColor() and Image_PixMap::SetPixelColor() methods have been extended
with an optional argument for performing linearization/delinearization of 8-bit sRGB pixel formats.
Draw Harness command AISColor has been corrected to take color name instead of enumeration index.
Name of the PROPERTY_DEFINITION entity for validation properties is changed to "geometric validation property" according to the current version of the recommended practices.
For compatibility with older definitions (with underscores) the check is made using string with underscores replaced by spaces.
The "end" file from folder "de" has been corrected to exclude comparing the number of edges in the shapes from current result with test data.
"TODO messages generated for differences were removed.
Data exchange tests were regenerated.
Correct procedure of initialization of BRepTopAdaptor_FClass2d and IntTools_FClass2d classifiers so as to produce more tight polygon in the case of self-intersections on very thin faces.
The idea is concluded in checking the condition:
defl < 2 * S / P, where S - is the surface area computed on produced polygon, P - its perimeter, defl - deflection computed on it.
If the condition is not true the polygon is discretized again using QuasiUniformDeflection tool.
Upgrade check of closeness of 2dcurve to line during projection:
For C1 and more surfaces check distance to normal, not to surface, for C0 surfaces update tolerance formula.
Add check for possible period jump in some inner point.
Update some test cases.
Add cache saving for lines,
update fixPeriodicTroubles() function, using parameters from cashe.
Small correction of test cases for issue #26930
fix processing of points from cache.
Update of test cases according to the new behavior
Fix behavior of fixPeriodicityTroubles() on different isolines,
fix copy/paste mistake.
Update test cases:
iges_2 C4 - return to master values
step_3 E6 - improvement.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
1. Unification of the polygons creation (it is regardless of arguments order).
2. Output of 2dintersect DRAW-command was changed.
3. Geom2dGcc_Circ2d2TanRadGeo.cxx:
Precise intersection point found by Extrema Curve-Curve method (dot product between every tangent vector and vector between points on two curves must be equal to zero).
4. Some comments have been translated from French to English.
Some test case have been updated.
Changes in accordance with the last remark
Test case for issue CR25593
Check whether p-curve being projected can be approximated by straight line is made before full-scale projection, to improve performance.
If straight, pcurve is created as Line only if this will lead to the same range parameterization as 3d curve, otherwise BSpline of degree 1 is created.
Re-approximation of line pcurves by bsplines removed from ShapeFix_Edge.
Test case updating to new behavior.
Added "static" keyword to the fixPeriodictyTroubles() function.
Update of test-cases according new behavior
Add check for too small distances during edges reordering
Fix writing TrimmedSurface (Type 144).
Fix checking for too small distances between loops of edges during edge's reordering.
Add checking for too small BSpline segments during reading and writing IGES.
Fix wire splitting by adding checking that vertexes same not only in 3d, but in 2d too.
use tolerance of vertexes recomputed through resolution surface, not 2d curves.
Adding test case for this fix
Modified test case bugs iges bug23746 and cases in group de according to new reference data
tolreached initialized (src\ChFi3d\ChFi3d_Builder_6.cxx);
LocalTransition initialized in deb case (src\HatchGen\HatchGen_Hatcher.gxx);
vprev initialized (src\Blend\Blend_Walking_3.gxx);
uprev initialized (src\BRepBlend\BRepBlend_SurfRstLineBuilder.cxx);
lxp initialized (src\Interface\Interface_FloatWriter.cxx)
pBuff initialized (src\OSD\OSD_Process.cxx)
aPrefix initialized (src\RWStepBasic\RWStepBasic_RWSiUnitAndPlaneAngleUnit.cxx)
ier initialized AdvApp2Var/AdvApp2Var_ApproxF2var.cxx
FacRevolInfini initialized BRepFeat_MakePrism.cxx
default action of "switch" returned
nombre mas of chars was expanded to 1024 (had been 20). this expansion helps avoiding the error of conversion a float number to mas of chars: the size of mas is enough for converting float number now.
Changed status (todo ?) of tests: de step_5 A6 B3, de iges_3 A9
Loop back tests for iges and step files with possibility of generation of reference data.
Clean up of test scripts (removal of obsolete code, adding comments, corrected formatting)
two fixes were done (same like bug 23722 and bug 23736)
Cancelling checking for number of warnings
rewrite some test scripts in cause of this and fix 23794
Tolerance checking was weakened.
Fix to check instability on Linux (bug 23822) was added.
TODO messages was added to tests which have different results on Windows and Mandriva2010
Ability to update this TODO in regeneration mode was added.
Add fix to bug 23852
Test groups were recomposed.
'dataexch' was renamed to 'de'.
CPU limit was decreased from 2000 sec. to 1500 sec.
