Test for 0027049: Make non-destructive mode be defined by default in Boolean operations
Test for 0027052: Test boolean gdml_private ZI5 failure
Test for 0027069: IGES parser does not recognize comments in Parameters section
Test for 0027090: Point is classified IN solid but actually it is OUT
Test for 0027170: Reading STEP files produces invalid shapes
Test for 0027186: IGES - reconsider creation of Undefined entity in case of failure
Test for 0027214: Duplicate of test cases
Test for 0027224: Incorrect result of boolean operation in boolean bcut_complex Q1 test case
Test for 0027227: Intersection curve is not continued to the surface boundary
Test for 0027246: ShapeFix_Shape destroys shape
Test for 0027251: Shape becomes invalid when exported to STEP and imported back
Test for 0027316: exception when XAddShape
Test for 0027378: BRepLib_MakeFace produces invalid faces on periodic surfaces in case the given parametrization does not match the default
Test for 0027390: Box and Ellipsoid shape boolean cut and common introduce invalid result.
Test for 0028119: Blend fails on fused identical but shifted tori
Test for 0028144: Step reader - regression in comparison of version OCCT654
Test for 0028151: Sewing faces results in a shell with very big tolerance
Test for 0027160: Weird results of the pipe algorithm
Test for 0027623: Cannot find intersection line between two trimmed planar surfaces
Test for 0027683: Inaccurate result by bopcut
Test for 0027687: Section between shells of hull and deck is not closed
Test for 0027711: Blend-on-blend corrupts the shape
Test for 0027784: Thickness fails on cylinder with draft
Test for 0027908: Exception during offset computation
Test for 0027909: Exception during offset computation
Test for 0027910: Sharing between edges was lost after offset operation
Test for 0027911: Exception during offset computation
Test for 0027912: Exception during offset computation
Test for 0027928: BOP common produces empty compound
Test for 0027948: Cut produces unexcpected shape
Test for 0027950: Result of intersection algorithm depends too much on surface trim bounds
Test for 0027701: Crash when export empty solid to STEP
Test for 0027722: STEP error for Ellipse revol shape
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
1. Restriction line is processed in IntTools_FaceFace with using methods of GeomInt_IntSS class.
2. Check, if Restriction- and Walking-lines (or Restriction-Restriction lines) are coincided, has been added in IntPatch_ImpPrmIntersection.cxx (at that RLine is considered to be isoline only).
3. Check, if RLine and GLine are coincided, has been added in IntPatch_ImpImpIntersection.cxx.
4. Create new class IntPatch_PointLine, which is inherited from IntPatch_Line.
5. The reason of exception (in DEBUG MODE) has been eliminated.
New test cases for issue #25416 were added.
tests/bugs/modalg_5/bug24650 was modified.
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
Modifications:
1.Test cases
2. locate_data_file from DrawResources/TestCommands.tcl
Fix for mesh end
Adjusting testing cases for current state of master using new organization of data files
Fix for #23273 issue.
Fix for #23273 issue (boolean/013/R9).
Modifications of tests according to #23260 issue.
Attempt to protect against hang-ups due to waiting for standard input
change of behaviour of offset/shape_type_i/D7 case.
Attempt to protect against hang-ups during initialization of menu in batch mode.
increase cpulimit for parallel incmesh.
#23260 is fixed. count_parallel is not needed anymore.
Deleted unused code.
change of behaviour of offset/shape_type_i/D7 case.
The fix was incorrect.
Second attempt to protect against hang-ups during initialization of menu in batch mode
correction of tests in order to awoid instability.
Elapsed time changed to CPU user time is performance tests.
Processing of errors on Windows.
Stop cpulimit killer if armed by test, after the test is completed
