Improve performance of Boolean operations algorithm by:
- Improving the check of Same Domain faces (BOPAlgo_Builder::FillSameDomainFaces());
- Faster rejection of outer faces for solids using Bounding Box classification first (BOPAlgo_Builder::FillIn3DParts());
- Using IncAllocator for local containers.
Quality improvement has been made in BOPAlgo_PaveFiller class:
1. Method IsExistingPaveBlock() has been corrected to provide the correct edge tolerance and to obtain valid intermediate results in the test case "boolean gdml_private ZH3".
New test case have been added to verify this improvement (bugs modalg_7 bug29301).
2. Method PutClosingPaveOnCurve() has been corrected to use the tolerance of the pave put on the bound for checking curve on closeness.
Additional check for the curve to have valid range after addition of the pave on the other end has been added to prevent considering the small curves (covered by vertex tolerance) as closed ones.
As a result of this modification the test case boolean gdml_public B2 has been fixed (TODO removed).
Adjustment of the test cases to current behavior:
- boolean bopcommon_complex J1 - the produced result was incorrect as it was self-interfered. There should be no common in this case.
- offset shape_type_i_c ZZ1 - the incorrect result is now produced instead of null shape.
1. The static method Standard_Real MinStep3D(...) in the class BOPTools_AlgoTools is
now checks if the computed 3D step is too big (relatively UV range of the faces)
for any of the faces.
2. The method PointInFace(...) of the class BOPTools_AlgoTools3D has been redesigned.
The new PointInFace(...) methods have been implemented to add possibility for looking the point
inside the face in necessary direction and distance from the edge of the face.
Note: old implementation is also functional.
3. Make methods for finding points near edges and computing normal directions on faces
return error status (0 in case of success).
4. Test case for the issue.
5. Test cases offset shape_type_i_c XJ2,XJ4,XJ5,XJ6 are improvements.
Removing useless file
1. The result of Boolean operation on the arguments of collection type, containers WIRE/SHELL/COMPSOLID, is also a collection.
The containers of type WIRE included into result should now also (as the SHELLs) have coherent orientation of its sub-shapes.
For that the new method has been implemented (BOPTools_AlgoTools::OrientEdgesOnWire(TopoDS_Shape&)) which reorients edges for correct ordering.
The duplicating containers, i.e. containers with the contents completely included in other containers, are now avoided in the result of BOP.
2. The result of Fuse operation on Compsolids is now also will be Compsolid.
3. Documentation has been updated.
4. New test cases for the issue.
5. Adjusting test cases to current behavior.
Correction of test case bugs/modalg_4/bug726_2 according to the new behavior
The map to protect the result of Boolean operation from duplicating parts in containers has been removed (method void BOPAlgo_BOP::BuildShape()).
The results of Boolean operations on containers will be the following:
1. For the arguments of collection type (WIRE, SHELL, COMPSOLID) containing overlapping parts the overlapping parts
passed into result will be repeated for each container from the input shapes containing such parts.
2. The result of the operation Fuse for the arguments of collection type (WIRE, SHELL, COMPSOLID) will contain
the same number of containers as the arguments. The overlapping parts (EDGES/FACES/SOLIDS) will be shared among them.
For example, the result of Fuse operation between two wires will be two wires sharing coinciding edges if any.
3. The result of the operation Common for the arguments of collection type (WIRE, SHELL, COMPSOLID) will consist
of the containers containing the same overlapping parts. For example, the result of Common operation between two
fully/partially overlapping wires will be two wires containing the same edges.
Style correction.
Added test case bugs/modalg_1/bug13538
Modified boolean test cases according to new begavior
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Changes:
class BOPTools_AlgoTools
static function:
Standard_Boolean FindPointInFace(const TopoDS_Face& aF,
const gp_Pnt& aP,
gp_Dir& aDB,
gp_Pnt& aPOut,
Handle(IntTools_Context)& theContext,
GeomAPI_ProjectPointOnSurf& aProjPL,
const Standard_Real aDt,
const Standard_Real aTolE)
Binormal calculation starts from the point located outside the tolerance circle of the edge
Test case for issue CR25432
Correction of test cases for issue CR25432
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Modifications:
Changed the way of finding the angle between the faces.
New static functions:
GetFaceDir - builds direction for the face;
FindPointInFace - finds the point in the face in bi normal direction.
New square values have been set in the following test cases:
boolean bopcommon_complex J1
bugs modalg_2 bug202085_6
bug202085_7
bug202085_8
bug202085_9
bug202085_10.
"TODO" marks have been removed from these cases.
Added test cases bugs modalg_5 bug23853
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
Modifications:
1.Test cases
2. locate_data_file from DrawResources/TestCommands.tcl
Fix for mesh end
Adjusting testing cases for current state of master using new organization of data files
Modified class :IntTools_FaceFace
- method: void IntTools_FaceFace::ComputeTolReached3d()
The goal is:
to give more precise definition to the value of tolerance of intersection curves in 3D for the case plane/sphere.
Added test case boolean/bopcommon_complex/M7
Added test case boolean/bopcommon_simple/ZP9 for verified bug CR23374
Fix for #23273 issue.
Fix for #23273 issue (boolean/013/R9).
Modifications of tests according to #23260 issue.
Attempt to protect against hang-ups due to waiting for standard input
change of behaviour of offset/shape_type_i/D7 case.
Attempt to protect against hang-ups during initialization of menu in batch mode.
increase cpulimit for parallel incmesh.
#23260 is fixed. count_parallel is not needed anymore.
Deleted unused code.
change of behaviour of offset/shape_type_i/D7 case.
The fix was incorrect.
Second attempt to protect against hang-ups during initialization of menu in batch mode
correction of tests in order to awoid instability.
Elapsed time changed to CPU user time is performance tests.
Processing of errors on Windows.
Stop cpulimit killer if armed by test, after the test is completed
