Make possibility to dramatically increase the step during iteration on the curve when the global resolution of the curve is too small.
Correct the functions FindParameters, FindBestSolution, FindDistPC.
The change caused improvement of the test case "boolean bfuse_complex E4", so the bug #27697 has been fixed.
The change caused dramatic improvement of the performance of the test "bugs modalg_7 bug27160", and the bug #29080 has been fixed.
1. IntTools_ShrunkRange::Perform
The algorithm of building shrunk range on the edge has been redesigned to make this range as big as possible.
By new definition it has to have the length not less than Precision::Confusion().
Although, the possibility of splitting of the edge has been taken into account. If it is impossible to put
vertex on edge in such a way that the tolerance spheres of the edge's vertices do not intersect the tolerance
sphere of the putting vertex the edge cannot be split. This possibility is saved in the new field
IntTools_ShrunkRange::myIsSplittable. It can be checked by the corresponding method IntTools_ShrunkRange::IsSplittable().
It returns TRUE if the shrunk range is computed successfully and it has the length more than the value of sum of two tolerance
values of the edge (for putting vertex, as its tolerance should not be less than the tolerance value of edge) and
two Precision::Confusion() values (to make two new edges valid by Shape validity criteria).
IntTools_ShrunkRange::myErrorStatus and IntTools_ShrunkRange::ErrorStatus() have been replaced by
the IntTools_ShrunkRange::myIsDone and IntTools_ShrunkRange::IsDone(). IntTools_ShrunkRange::IsDone() returns TRUE
if the shrunk range has been computed and it has length more than Precision::Confusion().
All computations of the parameters are performed using the GCPnts_AbscissaPoint, but if AbscissaPoint is unable to
compute the parameters the Resolution of the curve is used.
2. Boolean Operations algorithm now partially works with the edges that cannot be split or does not have the ShrunkData
at all (previously such edges have been considered as micro and just ignored). If by the result of some intersection such
edges should be split, i.e. the intersection vertex should be created, the algorithm just ignores them and no vertex is created.
But if such edges coincide with other shapes (other edges or faces) the algorithm uses them for creation of common blocks.
The information of the possibility for the edges to be split is saved in its PaveBlocks, in the new BOPDS_PaveBlock::myIsSplittable field.
It can be retrieved by the BOPDS_PaveBlock::IsSplittable() or BOPDS_PaveBlock::ShrunkData(), but these methods
make sense only after filling of the shrunk data for the pave block.
BOPTools_AlgoTools::IsMicroEdge() has an additional parameter that defines whether it is necessary to take into account
the possibility for the edge to be split or not. By default it is set to TRUE, i.e. by default the edge will be considered as micro
even if the shrunk range is computed, but it is too short for the edge to be split.
3. BOPAlgo_PaveFiller::PerformEF
To avoid creation of too close intersection vertices the intersection ranges of the edges participating in Edge/Face
intersections are reduced taking into account the common ranges computed during Edge/Edge intersections.
Thus, the Edge/Face intersection vertex is not created if it gets into a common range of the Edge/Edge intersection
between that edge and one of the face's edges. The tolerance value of Edge/Edge intersection vertex is increased
to reach the Edge/Face intersection.
4. Unification of the vertices of the section edges considered as micro edges.
If by the result of some Face/Face intersection the section edge is considered as micro edge,
the vertices of this edge will be united and the edge itself will be removed.
5. Test cases for the issues.
6. Adjusting test cases for issue CR27448.
1. New sharing algorithm has been implemented. If intermediate point of some edge is included in the tube with center taken in another edge and radius equaled to maximal vertex-tolerance of both edges then these two edges are considered to be shared. This know-how touches edges only, which have common blocks with interfered faces. If they do not have any common-blocks the algorithm will work as before.
2. Interface of BOPAlgo_PaveFiller::IsExistingPaveBlock(...) method has been changed.
Creation of test case for issues #27128 and #27179
Adjusting some test cases according to their new behavior, because they are IMPROVEMENTS really (TODOs have been deleted).
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Modifications:
- BRepOffset/BRepOffset_Tool.cxx, Features and Fillets algorithms have been ported on new BO algorithm.
- Old BO algorithm, that was implemented in BOP, BooleanOperations and BOPTools packages, has - been deleted.
- Porting SALOME algorithms to new BOP algorithm.
- Fixing regressions. Rebased on current master.
- Corrections in post treatment of section edges;
- Corrections in the accordance with the bug 0023293;
- Small corrections in the bopcheck and bopargcheck commands.
- NCollection maps have been replaced by NCollection indexed maps to guarantee the constant order of sub-shapes in the result of boolean operation.
- Test case feat featprism M9 has been fixed.
- Test cases chl 902 E3 H3 have been fixed (corrections in the treatment of section edges).
- Test cases caf driver B6 B7, caf named_shape F6 F7 have been modified according to the new order of sub-shapes in the result of boolean operation.
- Test cases blend buildevol G1, blend simple K4, bcommon_complex C7, feat featprism L6 have been modified as they are improvements.
- Test case boolean bsection A3 has been modified according to the new syntax of the bsection command.
- Test cases boolean bfuse_complex J1 P9 have been fixed (the function IsInternalFace has been modified to use the function GetFaceOff);
- Test case chl 902 H3 has been fixed (changes in the treatment of section edges);
- Test case boolean bsection D8 has been modified (removed TODO statement);
- Test case boolean bsection A3 has been modified (as the shapes have been changed).
- Added correction of the tolerance values of the shapes according to the bug 0023610.
- test cases:
boolean bcommon_complex C3,
boolean bcut_complex F2 O7,
boolean bfuse_complex C4 C5 E4,
boolean bsection B6 M8 M9 N4 N5 N7,
boolean bfuse_simple ZP6,
draft angle G8,
feat featprism S2
have been marked as invalid according to the bug 0022033;
- New value of result has been set in the test cases :
boolean bopsection D4
boolean bsection R8
as it is correct.
- test case bugs modalg bug23472 has been rewritten according to the new format of bsection command.
- The classes IntTools_Context and IntTools_ShrunkRange have been replaced by BOPInt_Context and BOPInt_ShrunkRange accordingly.
- The new class BRepAlgoAPI_Check has been added according to the bug 0023648.
- Some regressions have been fixed.
- The following test cases have been marked as invalid or rewritten
bugs modalg buc60462_2, 60531_2, 60776_1, bug472_1, bug472_2, bug472_3, bug497_3, bug62
bugs moddata bug26_1, bug26_2,
- The test case bugs modalg buc60533 has been rewritten to use the general fuse algorithm for building the result.
- The new value of the result has been set in the test case bugs modalg 60776_2.
- The following test cases have been rewritten according to the new format of the bsection command
bugs modlag fra62369, pro18892
bugs moddata bug75_1, bug75_2
- Corrected BRepAlgoAPI_Check.
- Removed package BOPTColStd.
- Rewritten test cases caf named_shape F8 F9.
- Removed unnecessary comments.
- Corrected the following test scripts :
boolean bcut_complex(012) O3 O4 O5 O6 O8
boolean bfuse_complex(013) O5 O6 P8
boolean bopcommon_complex(021) D8 D9
boolean bopfuse_complex(022) H1 J6
boolean boptuc_complex(024) D5
bugs modalg(006) bug399 bug497_1
feat featprism(003) C4
- Corrections in the treatment of section edges (putting paves on the curves);
- Corrections in BRepOffset_Tool;
- The following test cases have been rewritten according to the new format of the bsection command
bugs modalg bug6502, bug6554, bug6766_1, bug6766_3
- The new value of the result has been set in the following test cases
bugs modalg bug1255, bug1255_1
- The following test cases have been marked as invalid or rewritten
bugs modalg bug472_2, bug472_3, bug825_2
bugs moddata bug10603, bug152_1, bug152_2, bug3721_1, bug3721_2, bug3721_3
- The following test cases have been rewritten as improvements
bugs modalg bug693, bug693_1, bug817_1
bugs moddata bug3721_5, bug3721_6, bug6862_3, bug6862_4, bug6862_6
- Test cases bugs modlag buc60787_1, buc60787_2, buc60788_2, buc60788_3 have been corrected.
- Fixed some SALOME regressions (modifications in the treatment of the section edges);
- Fixed test case bugs modalg bug23100;
- Test cases bugs modalg bug21754, bug22990 have been corrected according to the new format of the bsection command.
- Test cases bugs modalg bug13116_*, bug23711 have been fixed;
- Test cases bugs modalg bug697_2, bug697_4, bug697_7, bug697_8 have been marked as invalid according to the issue 0022033;
- Test cases bugs modalg bug22109_2, bug22109_3 have been corrected;
- Test case bugs modalg bug18186 has been corrected as it is improvement;
- Test case bugs modalg bug22802 has been deleted as there is no package BOPTColStd.
Modifications:
1.Test cases
2. locate_data_file from DrawResources/TestCommands.tcl
Fix for mesh end
Adjusting testing cases for current state of master using new organization of data files
Fix for #23273 issue.
Fix for #23273 issue (boolean/013/R9).
Modifications of tests according to #23260 issue.
Attempt to protect against hang-ups due to waiting for standard input
change of behaviour of offset/shape_type_i/D7 case.
Attempt to protect against hang-ups during initialization of menu in batch mode.
increase cpulimit for parallel incmesh.
#23260 is fixed. count_parallel is not needed anymore.
Deleted unused code.
change of behaviour of offset/shape_type_i/D7 case.
The fix was incorrect.
Second attempt to protect against hang-ups during initialization of menu in batch mode
correction of tests in order to awoid instability.
Elapsed time changed to CPU user time is performance tests.
Processing of errors on Windows.
Stop cpulimit killer if armed by test, after the test is completed
