The parameter defining image width has been added to all figures to improve their layout in PDF documents and tweaked depending on the nature of each image.
Additionally, some minor changes improving image and text layout have been introduced.
Remove temporary added possibility for setting image width automatically for generation of pdf documentation.
Subdivision of curve parametric interval based on deflection criteria is added for curve type OtherCurve in
Extrema_GExtPC.gxx. Algorithm of subdivision is implemented in Extrema_Curve(2d)Tool.cxx
New Draw command projpcurve for projection of point on CurveOnSurface is added in SWDRAW_ShapeAnalysis.cxx
projpcurve is modified to reflect "start parameter" in usage message and Draw help.
Updated destination directory for generated by gendoc proc pdf files.
Added additional option "-update_images_size" for gendoc procedure to update width of images in *.md files during pdf generation for @figure alias.
Documentation was updated to use alias @figure instead of outdated @image
Added support of svg image format in procedure OCCDoc_UpdateImagesSize.
Added generation of overview for product components.
Added generation of products refman/chm for each component.
A new Shaded presentation flag configured through Datum aspect (NOT as usual Display Mode).
Creation of auxiliary Axis/Point/Plane presentations in Trihedron presentation is removed.
'vtrihedron' DRAW command to change parameters of trihedron is extended to cover whole functionality of AIS_Trihedron.
The following classes are redesignede:
AIS_Trihedron,
Prs3d_DatumAspect.
The followin enumermations are created to manage properties of trihedron:
Prs3d_DatumAttribute,
Prs3d/Prs3d_DatumAxes,
Prs3d_DatumMode
- New method BRepLib::FindValidRange() has been added. It computes the range of the edge not covered by boundary vertices.
- The algorithm of calculation of valid intersection range in the class IntTools_ShrunkRange has been corrected to use the new method.
- The method BOPTools_AlgoTools::MakeSplitEdge() has been improved to protect against errors in the case of reversed orientation of the input edge.
- Two new Draw commands have been added:
validrange - it calls the new method BRepLib::FindValidRange().
tolsphere - it shows tolerances of vertices by drawing a sphere around each vertex of the shape.
- The test cases "offset shape_type_i_c YE1,YE2" became better. The scripts have been corrected to reflect the new state.
1) BRepLib::UpdateTolerances(..) & BRepLib::SameParameter(..) functions now support non-mutable input feature. reshaper is used to store modified copies of subshapes of original (input) shape(s) as substitutions.
2) IsNewShape(..) method has been added to BRepTools_ReShape to check if the given shape has been recorded as a value
1. The TestTopOpe* packages have been removed.
2. The commands *compare*, *issubshape* and *projponf* have been moved to BRepTest package.
3. The possibility to change the Extrema options has been added to projection algorithm (GeomAPI_ProjectPointOnSurf).
4. Documentation has been updated.
1. The CellsBuilder algorithm has been extended to work with multi-dimensional arguments.
It has become possible not only simulate Boolean expressions, but also perform non-supported
Boolean operations, like cutting face from solid, or fusing face with edge.
2. Test cases with multi-dimensional input shapes have been created.
3. Documentation has been updated.
1. Removal of the traces of the usage of old Boolean operations in BRepFeat package.
2. The DRAW commands *fubl* and *cubl* based on old Boolean operations have been removed.
The alternative for these commands are the commands *bfuseblend* and *bcutblend* respectively.
The last two commands are based on the modern Boolean operations.
3. The DRAW command *ksection* based on old Boolean operations has been removed.
The command *bsection* should be used as alternative.
Test cases which have been using the *ksection* command have been modified to use the *bsection* command.
4. The class QANewBRepNaming_BooleanOperation has been modified to use modern Boolean operations.
The class QANewBRepNaming_BooleanOperation has been removed as not used.
The class QANewBRepNaming_BooleanOperationFeat has been renamed to QANewBRepNaming_BooleanOperation as it has nothing to do with Feat algorithm.
1. The partition operation allows splitting an arbitrary number of shapes of an arbitrary dimension
by other arbitrary shapes. The algorithm has been implemented in the class BOPAlgo_Splitter.
The API operator Splitter has been implemented in the class BRepAlgoAPI_Splitter.
2. The draw commands for usage the new algorithm have been implemented - bsplit and bapisplit.
The commands are identical, but one uses the BOPAlgo_Splitter, the other uses BRepAlgoAPI_Splitter.
Both commands should be used after Pave Filler is filled.
3. Test cases for the new algorithm.
4. Documentation has been updated.
Small corrections.
1. The two new methods have been implemented:
a. BOPAlgo_Tools::EdgesToWires - allows creating planar wires from edges.
The input edges may be not shared, but the output wires will be sharing the coinciding vertices and edges.
It is possible to skip the sharing if the input edges are already shared by passing the corresponding flag into the method.
The input edges are expected to be planar, but the method does not check it. Thus, if the input edges are not planar, the output wires will also be not planar.
In general, the output wires will be non-manifold and may contain free vertices.
b. BOPAlgo_Tools::WiresToFaces - allows creating planar faces from the planar wires.
In general, the input wires are non-manifold and may be not closed, but should share the coinciding parts.
The wires located in the same plane and completely included into other wires will create holes in the faces built from bigger wires
These two methods combined allow building faces from set of edges randomly located in 3D space.
2. The DRAW command *edgestofaces* has been implemented.
3. The documentation has been updated with the new section in Modeling Algorithms - Topological Tools.
4. Test cases for the issue.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
1) In Views menu the check button item "Extended view commands" has been added. Pressing on it shows/hides the set of buttons in the main window that allow manipulating of view zoom/pan/rotate by mouse.
2) New category of commands "Vector and measurement Commands" has been added. The commands in this category allow simple calculations using 2D and 3D vectors, such as cross and dot products, computation of distances of points to other objects, and other functions.
3) The new command "pickf" has been added in "DRAW Variables management" category. It allows extracting a picked with mouse face included in some shape as a new variable.
4) New commands "del" and "era" have been added in "DRAW Variables management" category. They allow deleting (destructing) or erasing (from view) variables matched by glob pattern.
5) Missing help for some commands like "don", "disp" and others has been added.
1. There has been implemented calculation of all possible types of continuity for shared edges:
* G1 is set if tangential planes are the same for connected faces in each control points through the edge;
* C1 is set in addition to G1 conditions if derivatives, orthogonal to the edge on each face, are equal vectors;
* G2 is set in addition to G1 if the centers of principal curvatures are the same for connected faces in each control points through the edge;
* C2 is set in addition to C1 and G2 if directions of principal curvatures are equal;
* CN continuity is set only if both connected faces are based on elementary surfaces (the conditions for this case are similar to C2 continuity).
2. ShapeFix::EncodeRegularity() is merged into BRepLib::EncodeRegularity().
3. Implemented several test cases to check correct handling of regularity.
4. Fix incorrect usage of BRepLib::EncodeRegularity() in BRepBuilderAPI_Sewing.
5. Implement a method for calculation of regularity on the given list of edges.
6. Documentation updates
- Implement top-down update for assemblies in XCAFDoc_ShapeTool
- Get rid of UpdateAssembly() method used for partial (parent-only) update
- Adjust STEP and IGES translators to use the top-down update after filling OCAF
- Implement XUpdateAssemblies Draw command
- Add test cases bug28055_1 and bug28055_2 for component removal and part update
- Update XDE documentation to mention the new UpdateAssemblies() method
Correction for issue CR28055
Adjusting of test case bugs/fclasses/bug28217
Now, GeomPlate_BuildPlateSurface accepts base class Adaptor3d_HCurve and of course array of Adaptor3d_HCurve.
Classes GeomPlate_Array1OfHCurveOnSurface and GeomPlate_HArray1OfHCurveOnSurface have been renamed to GeomPlate_Array1OfHCurve and GeomPlate_HArray1OfHCurve correspondingly.
Documentation has been updated.
Correction in documentation.
1. The result of Boolean operation on the arguments of collection type, containers WIRE/SHELL/COMPSOLID, is also a collection.
The containers of type WIRE included into result should now also (as the SHELLs) have coherent orientation of its sub-shapes.
For that the new method has been implemented (BOPTools_AlgoTools::OrientEdgesOnWire(TopoDS_Shape&)) which reorients edges for correct ordering.
The duplicating containers, i.e. containers with the contents completely included in other containers, are now avoided in the result of BOP.
2. The result of Fuse operation on Compsolids is now also will be Compsolid.
3. Documentation has been updated.
4. New test cases for the issue.
5. Adjusting test cases to current behavior.
Correction of test case bugs/modalg_4/bug726_2 according to the new behavior
1. The possibility to prevent addition of internal parts has been added into the following algorithms:
- BOPAlgo_BuilderFace;
- BOPAlgo_BuilderSolid;
- BOPAlgo_MakerVolume.
Setting the option to avoid internal parts for MakerVolume algorithm guarantees that the result solids
will be manifold and not contain any internal parts. But it does not prevent from occurrence
of the internal edges or vertices in the faces.
2. The Set/Get methods of the BOPAlgo_BuilderArea class have been made inline.
3. Draw command mkvolume has been updated to take into account the new option.
4. BRepOffset_MakeOffset::BuildShellsCompleteInter() has been modified to use the new option of BOPAlgo_MakerVolume
to speed up the construction of the final result solid.
5. Documentation has been updated with new section dedicated to BOPAlgo_MakerVolume algorithm.
6. Test case for the issue.
The Gluing operation is an additional option for the algorithms in the Boolean Component
such as General Fuse, Boolean operations, Section operation, Maker Volume and Cells Builder algorithms.
The Gluing options have been designed to speed up the computation of the interference among arguments of the operations on special cases,
in which the arguments may be overlapping but do not have real intersections between their sub-shapes.
This option cannot be used on the shapes having real intersections, like intersection vertex between edges,
or intersection vertex between edge and a face or intersection line between faces.
The Gluing option is an enumeration implemented in BOPAlgo_GlueEnum.hxx. There are following items in the enum:
* BOPAlgo_GlueOff - default value for the algorithms, Gluing is switched off;
* BOPAlgo_GlueShift - Glue option for shapes with partial coincidence;
* BOPAlgo_GlueFull - Glue option for shapes with full coincidence.
For setting the Gluing options for the algorithm it is just necessary to call the SetGlue(BOPAlgo_GlueEnum) method with appropriate Glue value.
For using this option in DRAW the command bglue has been implemented:
* 0 - default value, Gluing is off;
* 1 - for partial coincidence;
* 2 - for full coincidence
Elimination of the warnings.
New topology-preserving offset algorithm has been added. It allows to construct offset shape of build solid.
test cases have been added.
Documentation has been updated to be up to date.
Minor corrections.
Grid is renamed for simplification purposes.
Old constructors are restored with Standard_DEPRECATED macros.
New section about scene-graph hierarchy and instancing.
Proofreading of extended section about z-layers.
Removal of obsolete information.
Remarks taken into account.
Implementation of custom text in dimension presentation;
Test case is provided for this bug;
Code correction: Standard_EXPORT is removed for inline method.
Minor correction of test case bugs/vis/bug27688
Graphic3d_ZLayerSettings - public fields have been replaced by methods.
Added new property Origin defining local coordinate system for all Layer objects.
Syntax of Draw Harness command VZLayer has been redesigned.
Graphic3d_CStructure now stores bounding box with double precision floats.
OpenGl_BVHTreeSelector - frustum culling now works with double precision floats.
0027734: Configuration - TKIVtkDraw build fails with TBB: Remove unnecessary define statement (windows specific).
Small correction of test case for issue CR27567
- Added new static methods Read and Write in BinTools class to store/retrieve a shape in binary format.
- Added new draw commands "binsave" and "binrestore"
- Added test cases to test the new methods.
- Updated documantation with desription of the new BinTools class methods and corresponding BRepTools class methods.
Fields to store cached instances of reader and writer drivers for each format are added in CDF_Application.
Method DefineFormat() is added in TDocStd_Application, allowing defining format completely by single call, including drivers to be used for persistence.
All OCAF driver packages provide static method DefineFormat() that defines standard OCAF persistence format supported by corresponding package; these methods are called in DRAW to enable all persistence by default.
DRAW commands (except TObj-specific ones) now use single instance of OCAF Application, returned by DDocStd::GetApplication(). Other instances are eliminated, as well as method DDocStd::Find(const Handle(TDocStd_Application)&).
Method MessageDriver() and relevant field are moved to TDocStd_Application from its descendants.
Method CDF_Application::ReaderFromFormat() is made virtual to allow its redefinition in descendants.
Creation of storage driver is moved from PCDM::StorageDriver() to new virtual method CDF_Application::WriterFromFormat().
The code loading driver as plugin is retained in both these methods for compatibility.
Test command OCC24925 is converted to use virtual methods instead of defining plugin resource.
Migration table for old OCAF types is hard-coded in Storage_Schema::CheckTypeMigration().
Removed obsolete and unused items:
- FWOSPlugin library (driver is created directly)
- Methods in classes CDM_Document dealing with unused parameters of format
- DRAW command OCC23010 for testing non-reproducible issue #23010
- Methods PCDM::StorageDriver(), PCDM::FindStorageDriver()
- Method Formats() from CDF_Application and descendants
- Methods LoadExtensions and SchemaName from PCDM_StorageDriver
- Method Plugin::AdditionalPluginMap()
- Method BinLDrivers_DocumentStorageDriver::SchemaName()
- Method CDF_Application::DefaultExtension(), Reader(), FindReader(), FindReaderFromFormat()
- Method CDF_Store::Check()
The map to protect the result of Boolean operation from duplicating parts in containers has been removed (method void BOPAlgo_BOP::BuildShape()).
The results of Boolean operations on containers will be the following:
1. For the arguments of collection type (WIRE, SHELL, COMPSOLID) containing overlapping parts the overlapping parts
passed into result will be repeated for each container from the input shapes containing such parts.
2. The result of the operation Fuse for the arguments of collection type (WIRE, SHELL, COMPSOLID) will contain
the same number of containers as the arguments. The overlapping parts (EDGES/FACES/SOLIDS) will be shared among them.
For example, the result of Fuse operation between two wires will be two wires sharing coinciding edges if any.
3. The result of the operation Common for the arguments of collection type (WIRE, SHELL, COMPSOLID) will consist
of the containers containing the same overlapping parts. For example, the result of Common operation between two
fully/partially overlapping wires will be two wires containing the same edges.
Style correction.
Added test case bugs/modalg_1/bug13538
Modified boolean test cases according to new begavior
A few remaining places mentioning .cdl files are corrected to mention only .hxx
Obsolete description of storage in old format is revised in OCAF User's Guide.
Technical docs are reviewed to:
* update references to page with third-party products
* update description of persistence, handles, and RTTI according to changes in OCCT 7.0
* remove references to CDL, WOK, and WOK-generated stuff
* update the list of environment variables
Some pre-release updates, reviewing and implementation of some adequate remarks from JMA:
- redundant chapters in IGES and STEP guides
- proofreading of recent insertions in Draw, and tests guides
- mathjax information
- data, version, addresses, system requirements in overview.md
Corrections
- updated description of selection mechanism in sections occt_visu_2_2, occt_visu_3_2_4 and occt_visu_3_6;
- unnecessary images were removed.
New Selection section reviewed.
Semantic corrections
- m-dashes added.
- some other cases of incorrect dash use fixed
- unicode dashes were removed throughout the documentation.
- other comments taken into account.
Contribution workflow document is revised and extended to eliminate inconsistencies and describe the process in more details:
- Meaning of issue fields in Mantis (Category, Severity, Profile, Project and Target Version, etc.) is described in more details
- Additional rules are defined and examples given for defining Summary and Description, and writing commit messages
- Requirements for testing, creation of test case, update of user documentation, etc. when resolving an issue, are described
- Additional elements of the workflow (patch sumbission, rebasing branches, use of feedback status, issue relationships) are described
Some refinement in other guides; OCC logo updated for better quality.
