Select3D_SensitiveCircle now inherits directly from Select3D_SensitiveEntity.
The sensitive circle sector is created using the Select3D_SensitivePoly class directly.
Added appropriate methods for selecting sensitive circles.
Added parameter myIsHollow to Select3D_SensitiveCylinder class.
It allows you to search for intersections with cylinders without covers.
The Draw vcircle command has been extended with UStart and UEnd parameters
to create a sector of a circle.
Added tests: vselect/cone_cylinder/circle_sector
vselect/cone_cylinder/circle_wire
vselect/cone_cylinder/filled_circle
vselect/cone_cylinder/transformed
vselect/cone_cylinder/hollow_cone_cyl
Make XCAFDoc_Editor::RescaleGeometry to pass the flag theCopyMesh==true
in call to BRepBuilderAPI_Transform::Perform.
Correct the help of the command XRescaleGeometry.
'MultiThread' field was added to structure RWGltf_DracoParameters for using multithreading.
Class CafWriter_DracoEncodingFunctor was added for multithreaded compression.
Fixed bounding boxes for Select3D_SensitiveCylinder.
Added display of Select3D_SensitiveCylinder presentation using the "vsensdis" command.
Added test vselect/bugs/bug33084.
* Avoid crash in BRepBuilderAPI_GTransform algorithm. The crash in BRepBuilder_Transform has been solved by 0032716.
* Move copying modifier to BRepTools package.
* Implement copying of triangulation in BRepTools_NurbsConvertModification.
* Implement transformation of a triangulation in BRepTools_GTrsfModification.
* Update test case bugs/mesh/bug22778 to clean the triangulation after conversion to NURBS (reproduce the same behavior as before).
* Implement methods for copying tessellation to BRepTools_TrsfModification to keep the triangulation during transformation.
* Add tests to reproduce the problem.
GeomConvert_CurveToAnaCurve, GeomConvert_SurfToAnaSurf - geometrical algorithms
for converting geometrical curve and surfaces in canonical geometry with given tolerance.
ShapeAnalysis_CanonicalRecognition - interface for checking canonical geometry.
Added Graphic3d_TypeOfBackfacingModel_FrontCulled enumeration value.
OpenGl_Context::SetFaceCulling() now supports GL_FRONT in addition to GL_BACK.
Added -faceCulling option to vaspects Draw command.
1. Multiple changes in ShapeUpgrade_ShapeDivideArea, ShapeUpgrade_FaceDivide, ShapeUpgrade_FaceDivideArea, ShapeUpgrade_SplitSurface, ShapeUpgrade_SplitSurfaceArea: new methods NbParts and SetSplittingByNumber, changes in ShapeUpgrade_FaceDivideArea::Perform and ShapeUpgrade_SplitSurfaceArea::Compute concerning new modes of splitting.
2. New Draw command "DT_SplitByNumber" for testing new modes of splitting.
3. New subgroups "split_number" and "split_two_numbers" in the group of tests "heal" for testing new modes of splitting.
Improved the processing for the case where Failure flag for the meshing face is set. Specific tests added.
Check triangulation consistency even for shapes with problematic topology given that they are suitable for keeping it.
Get rid of strange code: preliminary check of self-intersections is made on a polygonal representation of a curve, it is able to find possible intersections, but after that it filter out segments neighbor to the pair of non-intersected segments.
Test case de step_4 I1 has been marked BAD, because the self-intersection is treated correctly, but the projection algorithm generates such crooked 2D curve.
Reference data in test cases heal split_angle_advanced ZA5 and ZA6 has been updated, because those shapes have self-intersected edges, which are being detected now.
New XCAFDoc classes:
- XCAFDoc_AssemblyIterator: iterator in depth along the assembly tree
- XCAFDoc_AssemblyGraph: assembly graph with iterator
- XCAFDoc_AssemblyTool: provides generic methods for traversing assembly tree and graph
A method for re-scaling (sub-)assembly geometry is added to XCAFDoc_Editor.
New DRAW commands:
- XDumpAssemblyTree: iterates through the assembly tree in depth up to the specified level, if any
- XDumpAssemblyGraph: prints assembly graph structure
- XDumpNomenclature: prints number of (sub-)assembly/part instances
- XRescaleGeometry: applies geometrical scale to (sub-)assembly
Fix affects BFGS optimization methods by checking convergence as the first step on each iteration. FRPR works well, but it is updated as well since its logic potentially dangerous.
When creating a fillet, num is calculated via ChFi3d_IndexOfSurfData. If it
returns just the number of entries in surfdata, it can happen that this
value becomes invalid when handling the case "two faces common to the edge
are found". When both components are on an arc, there will be num removed
from the surfdata.
num would then be larger than the number of entries surfdata. The derived
num1 is therefore also incorrect. The subsequent usage of this
value will either:
* Debug build: cause an out of bounds exception in ChangeValue
(`SeqFil.ChangeValue(num)`)
* Release build: cause a segfault when retrieving it via index num1
(`SeqFil(num1)`)
num + num1 must be recalculated after the deletion happens to correctly
calculate the fillet.
Signed-off-by: Charlemagne Lasse <charlemagnelasse@gmail.com>
The PerformIntersectionAtEnd code is currently not handling all the faces
correctly. If it retrieves Face[0] as F, it can happen that the previously
ran code didn't actually retrieve any faces in this array at all.
For example when:
* "if (nface==3)" is true
- "if (!findonf1)" is true (doesn't assign any faces to this array)
- "if (!findonf2)" is true (doesn't assign any faces to this array)
- "if (state == ChFiDS_OnSame)" is not true (because it is
ChFiDS_AllSame)
- "if (findonf1 && !isOnSame1)" cannot be true (see above, but would
handle faces)
- "if (findonf2 && !isOnSame2)" cannot be true (see above, but would
handle faces)
- "if (isOnSame2)" is false (but would also handle faces)
Since no faces were assigned here, F would be a NULL face. As result, the
function will crash when trying to access the Surface behind the face via
`BRep_Tool::Surface(F);`.
While the best approach would be to identify the implementation bug in the
algorithm behind PerformIntersectionAtEnd, a check + exception is used
instead because the actual algorithm is not known.
Signed-off-by: Charlemagne Lasse <charlemagnelasse@gmail.com>
The ChFi3d_IsInFront code is currently not handling all the combinations
correctly. For example, if `if(fd1->IndexOfS2() == fd2->IndexOfS2())` is
true, it can happen that the `TopoDS::Face(DStr.Shape(fd1->Index(jf1)))`
returns a Face with entity == NULL. The subsequent usage of this NULL face
in `BRep_Tool::Parameters( Vtx, face )` will then cause a segfault.
While the best approach would be to identify the implementation bug in the
algorithm behind PChFi3d_IsInFron, a check + exception is used instead
because the actual algorithm is not known.
Signed-off-by: Charlemagne Lasse <charlemagnelasse@gmail.com>
Support of reading and writing tessellated geometry is added for the following STEP entities:
- triangulated face
- complex triangulated face
- tessellated shell
- tessellated solid
- tessellated shape representation
Models without BRep geometry (mesh formats like STL, OBJ and so on) are supported for writing to STEP.
New parameters are added to enable/disable tessellated geometry reading and writing:
- read.step.tessellated (On/Off/OnNoBRep) (On by default)
- write.step.tessellated (On/Off/OnNoBRep) (OnNoBRep by default)
OnNoBRep - tessellation is read/written only for entities for which there is no BRep representation.
Faces with poly triangulation are written in STEP as triangulated face entities with one coordinates list per face.
Only one poly triangulation per face (returned by BRep_Tool::Triangulation) is written to STEP.
Added new option '-C' with possibility to set value of Angular and linear tolerances to 'mksweep' command to correct input spine by merging smooth connected neighboring edges
Problem: the complete surface of the torus is not stored correctly in STEP format due to the fact that the edges are not properly ordered.
Change: added a mode for reordering edges in the wire with simultaneous use of 2d and 3d information (ShapeAnalysis_WireOrder). The new mode is used for torus-like surfaces before saving to STEP format.
Result: Torus correctly stored.
SelectMgr_ViewerSelector::TraverseSensitives() now takes into account object's view affinity.
AIS_InteractiveContext::moveTo() - dropped code SelectMgr_AndOrFilter::SetDisabledObjects()
as filtering is now done by selector itself.
ViewAffinity property has been moved to PrsMgr_PresentableObject for simplicity.
Removed redundant map Graphic3d_CView::HiddenObjects().
Add choosing the intersect point taking into account the tangentCross when prev UEdge and next UEdge has more than one intersect points;
Add exact correction of edge tolerance (it fix problems with edge tolerance on Linux);
Add exact check of edge tolerance in testcase
IntTools/IntTools_BeanFaceIntersector.cxx - calculation of deflection for surface bnd box is added
tests/bugs/modalg_8/bug32942,bug32943,bug32944,bug32945 - new test cases added
