0023024: Update headers of OCCT files

Added appropriate copyright and license information in source files

src/StepToGeom/StepToGeom.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom.cdl
--- Created:	Fri Jun 11 18:17:21 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-11
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 package StepToGeom
 

src/StepToGeom/StepToGeom_CMPLRS.edl

@@ -1,7 +1,23 @@
--- File:	CMPLRS.edl
--- Author:	Christian CAILLET
--- History:	Wed May 21 10:57:28 1997
--- Copyright:	Matra Datavision 1997
+-- Created on: 1997-05-21
+-- Created by: Christian CAILLET
+-- Copyright (c) 1997-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 -- Pb compil gros code HP-UX sous WOK++
 -- trop de warning -> shut up

src/StepToGeom/StepToGeom_MakeAxis1Placement.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeAxis1Placement.cdl
--- Created:	Mon Jun 14 11:05:20 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeAxis1Placement from StepToGeom
 

src/StepToGeom/StepToGeom_MakeAxis1Placement.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeAxis1Placement.cxx
-// Created:	Tue Jun 15 18:35:17 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-06-15
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 22.10.2001. CTS23496: If problems with creation of axis's direction occur default direction is used (StepToGeom_MakeAxis1Placement(...) function)
 
 #include <StepToGeom_MakeAxis1Placement.ixx>

src/StepToGeom/StepToGeom_MakeAxis2Placement.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeAxis2Placement.cdl
--- Created:	Mon Jun 14 11:17:16 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeAxis2Placement from StepToGeom
 

src/StepToGeom/StepToGeom_MakeAxis2Placement.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeAxis2Placement.cxx
-// Created:	Thu Jul  1 16:41:35 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-01
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 22.10.2001. CTS23496: If problems with creation of direction occur default direction is used (StepToGeom_MakeAxis2Placement(...) function)
 
 #include <StepToGeom_MakeAxis2Placement.ixx>

src/StepToGeom/StepToGeom_MakeAxisPlacement.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeAxisPlacemant.cdl
--- Created:	Fri Aug 26 12:09:08 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-08-26
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeAxisPlacement from StepToGeom
 

src/StepToGeom/StepToGeom_MakeAxisPlacement.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeAxisPlacemant.cxx
-// Created:	Fri Aug 26 12:11:31 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-08-26
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 23.10.2001. CTS23496: If problems with creation of direction occur default direction is used
 
 #include <StepToGeom_MakeAxisPlacement.ixx>

src/StepToGeom/StepToGeom_MakeBSplineCurve.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeBSplineCurve.cdl
--- Created:	Mon Jun 14 15:22:02 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeBSplineCurve from StepToGeom
     

src/StepToGeom/StepToGeom_MakeBSplineCurve.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeBSplineCurve.cxx
-// Created:	Thu Jul  1 17:35:13 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-01
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeBSplineCurve.ixx>
 #include <gp_Pnt.hxx>

src/StepToGeom/StepToGeom_MakeBSplineCurve.pxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeBSplineCurve.pxx
-// Created:	Fri Jul  2 15:16:54 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 {
   Handle(StepGeom_BSplineCurveWithKnots)   BSCW;

src/StepToGeom/StepToGeom_MakeBSplineCurve2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeBSplineCurve2d.cdl
--- Created:	Tue Jul  6 12:11:06 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-07-06
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeBSplineCurve2d from StepToGeom
     

src/StepToGeom/StepToGeom_MakeBSplineCurve2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeBSplineCurve2d.cxx
-// Created:	Fri Jul  2 15:43:42 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeBSplineCurve2d.ixx>
 #include <gp_Pnt2d.hxx>

src/StepToGeom/StepToGeom_MakeBSplineSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_BSplineSurface.cdl
--- Created:	Tue Jun 22 10:33:07 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-22
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeBSplineSurface from StepToGeom
         

src/StepToGeom/StepToGeom_MakeBSplineSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeBSplineSurface.cxx
-// Created:	Fri Jul  2 12:05:11 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeBSplineSurface.ixx>
 #include <StepGeom_BSplineSurfaceWithKnots.hxx>

src/StepToGeom/StepToGeom_MakeBoundedCurve.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeBoundedCurve.cdl
--- Created:	Mon Jun 21 11:31:39 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-21
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeBoundedCurve from StepToGeom
 

src/StepToGeom/StepToGeom_MakeBoundedCurve.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeBoundedCurve.cxx
-// Created:	Fri Jul  2 12:34:13 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:n6 abv 15.02.99: S4132: adding translation of polyline
 //:p0 abv 19.02.99: management of 'done' flag improved; trimmed_curve treated
 

src/StepToGeom/StepToGeom_MakeBoundedCurve2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeBoundedCurve2d.cdl
--- Created:	Wed Aug  4 11:06:25 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-08-04
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeBoundedCurve2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeBoundedCurve2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeBoundedCurve2d.cxx
-// Created:	Wed Aug  4 11:08:11 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-08-04
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:n6 abv 15.02.99: S4132: adding translation of polyline
 //:p0 abv 19.02.99: management of 'done' flag improved
 

src/StepToGeom/StepToGeom_MakeBoundedSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeBoundedSurface.cdl
--- Created:	Tue Jun 22 12:37:10 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-22
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeBoundedSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeBoundedSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeBoundedSurface.cxx
-// Created:	Fri Jul  2 16:04:19 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:p0 abv 19.02.99: management of 'done' flag improved
 //:j7 abv 05.04.99: S4136: ass-tol2.stp #9861: avoid using CheckSurfaceClosure
 //    rln 02.06.99 removing #include <StepToGeom_CheckSurfaceClosure.hxx>

src/StepToGeom/StepToGeom_MakeCartesianPoint.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeCartesianPoint.cdl
--- Created:	Fri Jun 11 18:43:50 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-11
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeCartesianPoint from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCartesianPoint.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeCartesianPoint.cxx
-// Created:	Fri Jul  2 16:09:46 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeCartesianPoint.ixx>
 #include <StepGeom_CartesianPoint.hxx>

src/StepToGeom/StepToGeom_MakeCartesianPoint2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeCartesianPoint2d.cdl
--- Created:	Tue Jul  6 16:30:29 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-07-06
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeCartesianPoint2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCartesianPoint2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeCartesianPoint2d.cxx
-// Created:	Fri Jul  2 16:21:08 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeCartesianPoint2d.ixx>
 #include <StepGeom_CartesianPoint.hxx>

src/StepToGeom/StepToGeom_MakeCircle.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeCircle.cdl
--- Created:	Mon Jun 14 15:18:28 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeCircle from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCircle.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeCircle.cxx
-// Created:	Fri Jul  2 16:37:06 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeCircle.ixx>
 #include <StepGeom_Circle.hxx>

src/StepToGeom/StepToGeom_MakeCircle2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeCircle2d.cdl
--- Created:	Fri Aug 26 11:42:22 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-08-26
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeCircle2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCircle2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeCircle2d.cxx
-// Created:	Fri Aug 26 11:45:44 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-08-26
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeCircle2d.ixx>
 #include <StepGeom_Circle.hxx>

src/StepToGeom/StepToGeom_MakeConic.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeConic.cdl
--- Created:	Mon Jun 21 11:18:38 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-21
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeConic from StepToGeom
 

src/StepToGeom/StepToGeom_MakeConic.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeConic.cxx
-// Created:	Fri Jul  2 16:51:20 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:p0 abv 19.02.99: management of 'done' flag improved
 
 #include <StepToGeom_MakeConic.ixx>

src/StepToGeom/StepToGeom_MakeConic2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeConic2d.cdl
--- Created:	Fri Aug 26 11:36:35 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-08-26
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeConic2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeConic2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeConic2d.cxx
-// Created:	Fri Aug 26 11:38:37 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-08-26
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:p0 abv 19.02.99: management of 'done' flag improved
 
 #include <StepToGeom_MakeConic2d.ixx>

src/StepToGeom/StepToGeom_MakeConicalSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeConicalSurface.cdl
--- Created:	Mon Jun 14 16:05:32 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeConicalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeConicalSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeConicalSurface.cxx
-// Created:	Fri Jul  2 16:54:36 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeConicalSurface.ixx>
 #include <Geom_ConicalSurface.hxx>

src/StepToGeom/StepToGeom_MakeCurve.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeCurve.cdl
--- Created:	Mon Jun 21 10:14:42 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-21
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeCurve from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCurve.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeCurve.cxx
-// Created:	Fri Jul  2 17:07:46 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:n7 abv 16.02.99: S4132: adding translation of curve_replica
 //:o2 abv 17.02.99: S4132: adding translation of offset_curve_3d
 //:o5 abv 17.02.99: bm4_sd_seal_c.stp #58720: translate surface_curve (3d only)

src/StepToGeom/StepToGeom_MakeCurve2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeCurve2d.cdl
--- Created:	Wed Aug  4 10:42:37 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-08-04
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeCurve2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCurve2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeCurve2d.cxx
-// Created:	Wed Aug  4 10:45:01 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-08-04
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:n7 abv 15.02.99: S4132: adding translation of curve_replica
 //:p0 abv 19.02.99: management of 'done' flag improved
 

src/StepToGeom/StepToGeom_MakeCylindricalSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeCylindricalSurface.cdl
--- Created:	Mon Jun 14 16:09:17 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeCylindricalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCylindricalSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeCylindricalSurface.cxx
-// Created:	Fri Jul  2 17:20:46 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeCylindricalSurface.ixx>
 #include <Geom_CylindricalSurface.hxx>

src/StepToGeom/StepToGeom_MakeDirection.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeDirection.cdl
--- Created:	Mon Jun 14 14:53:21 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeDirection from StepToGeom
 

src/StepToGeom/StepToGeom_MakeDirection.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeDirection.cxx
-// Created:	Fri Jul  2 17:32:04 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 22.10.2001. CTS23496: Direction is not created if it has null magnitude (StepToGeom_MakeDirection(...) function)
 
 #include <StepToGeom_MakeDirection.ixx>

src/StepToGeom/StepToGeom_MakeDirection2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeDirection2d.cdl
--- Created:	Wed Aug  4 11:49:16 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-08-04
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeDirection2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeDirection2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeDirection2d.cxx
-// Created:	Wed Aug  4 11:50:31 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-08-04
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 23.10.2001. CTS23496: Direction is not created if it has null magnitude (StepToGeom_MakeDirection2d(...) function)
 
 #include <StepToGeom_MakeDirection2d.ixx>

src/StepToGeom/StepToGeom_MakeElementarySurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeElementarySurface.cdl
--- Created:	Tue Jun 22 14:24:10 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-22
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeElementarySurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeElementarySurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeElementarySurface.cxx
-// Created:	Fri Jul  2 17:38:21 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:p0 abv 19.02.99: management of 'done' flag improved
 
 #include <StepToGeom_MakeElementarySurface.ixx>

src/StepToGeom/StepToGeom_MakeEllipse.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeEllipse.cdl
--- Created:	Thu Sep  1 13:46:53 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-09-01
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeEllipse from StepToGeom
 

src/StepToGeom/StepToGeom_MakeEllipse.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeEllipse.cxx
-// Created:	Thu Sep  1 13:48:41 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-09-01
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:o9 abv 19.02.99: bm4_id_punch_b.stp #678: treatment of ellipse with minR > maxR
 //                  NOTE: parametrisation of resulting ellipse shifted on pi/2
 

src/StepToGeom/StepToGeom_MakeEllipse2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeEllipse2d.cdl
--- Created:	Thu Sep  1 13:56:44 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-09-01
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeEllipse2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeEllipse2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeEllipse2d.cxx
-// Created:	Thu Sep  1 13:57:24 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-09-01
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:o9 abv 19.02.99: bm4_id_punch_b.stp #678: treatment of minR > maxR
 //                  NOTE: parametrisation of resulting ellipse shifted on pi/2
 

src/StepToGeom/StepToGeom_MakeHyperbola.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeHyperbola.cdl
--- Created:	Thu Sep  8 08:24:18 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-09-08
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeHyperbola from StepToGeom
 

src/StepToGeom/StepToGeom_MakeHyperbola.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeHyperbola.cxx
-// Created:	Thu Sep  8 08:25:12 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-09-08
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeHyperbola.ixx>
 #include <StepGeom_Hyperbola.hxx>

src/StepToGeom/StepToGeom_MakeHyperbola2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeHyperbola2d.cdl
--- Created:	Tue May  9 10:42:44 1995
--- Author:	Dieter THIEMANN
----Copyright:	 Matra Datavision 1994
+-- Created on: 1995-05-09
+-- Created by: Dieter THIEMANN
+-- Copyright (c) 1995-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeHyperbola2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeHyperbola2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeHyperbola2d.cxx
-// Created:	Thu Sep  1 13:57:24 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-09-01
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeHyperbola2d.ixx>
 #include <StepGeom_Hyperbola.hxx>

src/StepToGeom/StepToGeom_MakeLine.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeLine.cdl
--- Created:	Mon Jun 14 15:51:51 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeLine from StepToGeom
 

src/StepToGeom/StepToGeom_MakeLine.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeLine.cxx
-// Created:	Fri Jul  2 17:51:47 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 22.10.2001. CTS23496: Line is not created if direction have not been succesfully created (StepToGeom_MakeLine(...) function)
 
 #include <StepToGeom_MakeLine.ixx>

src/StepToGeom/StepToGeom_MakeLine2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeLine2d.cdl
--- Created:	Wed Aug  4 10:53:16 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-08-04
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeLine2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeLine2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeLine2d.cxx
-// Created:	Wed Aug  4 10:55:40 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-08-04
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 23.10.2001. CTS23496: Line is not created if direction have not been succesfully created (StepToGeom_MakeLine2d(...) function)
 
 #include <StepToGeom_MakeLine2d.ixx>

src/StepToGeom/StepToGeom_MakeParabola.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeParabola.cdl
--- Created:	Thu Sep  8 09:00:04 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-09-08
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeParabola from StepToGeom
 

src/StepToGeom/StepToGeom_MakeParabola.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeParabola.cxx
-// Created:	Thu Sep  8 09:00:36 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-09-08
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeParabola.ixx>
 #include <StepGeom_Parabola.hxx>

src/StepToGeom/StepToGeom_MakeParabola2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeParabola2d.cdl
--- Created:	Tue May  9 10:42:44 1995
--- Author:	Dieter THIEMANN
----Copyright:	 Matra Datavision 1994
+-- Created on: 1995-05-09
+-- Created by: Dieter THIEMANN
+-- Copyright (c) 1995-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeParabola2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeParabola2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeParabola2d.cxx
-// Created:	Thu Sep  1 13:57:24 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-09-01
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeParabola2d.ixx>
 #include <StepGeom_Parabola.hxx>

src/StepToGeom/StepToGeom_MakePlane.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakePlane.cdl
--- Created:	Mon Jun 14 15:54:27 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakePlane from StepToGeom
 

src/StepToGeom/StepToGeom_MakePlane.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakePlane.cxx
-// Created:	Fri Jul  2 18:22:22 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakePlane.ixx>
 #include <StepGeom_Axis2Placement3d.hxx>

src/StepToGeom/StepToGeom_MakePolyline.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakePolyline.cdl
--- Created:	Mon Feb 15 15:01:21 1999
--- Author:	Andrey BETENEV
----Copyright:	 Matra Datavision 1999
+-- Created on: 1999-02-15
+-- Created by: Andrey BETENEV
+-- Copyright (c) 1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakePolyline from StepToGeom inherits Root from StepToGeom
 

src/StepToGeom/StepToGeom_MakePolyline.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakePolyline.cxx
-// Created:	Mon Feb 15 15:05:36 1999
-// Author:	Andrey BETENEV
+// Created on: 1999-02-15
+// Created by: Andrey BETENEV
+// Copyright (c) 1999-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakePolyline.ixx>
 #include <StepToGeom_MakeCartesianPoint.hxx>

src/StepToGeom/StepToGeom_MakePolyline2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakePolyline2d.cdl
--- Created:	Mon Feb 15 15:01:21 1999
--- Author:	Andrey BETENEV
----Copyright:	 Matra Datavision 1999
+-- Created on: 1999-02-15
+-- Created by: Andrey BETENEV
+-- Copyright (c) 1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakePolyline2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakePolyline2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakePolyline2d.cxx
-// Created:	Mon Feb 15 15:05:36 1999
-// Author:	Andrey BETENEV
+// Created on: 1999-02-15
+// Created by: Andrey BETENEV
+// Copyright (c) 1999-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakePolyline2d.ixx>
 #include <StepToGeom_MakeCartesianPoint2d.hxx>

src/StepToGeom/StepToGeom_MakeRectangularTrimmedSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeRectangularTrimmedSurface.cdl
--- Created:	Thu Jan 25 11:59:46 1996
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1996
+-- Created on: 1996-01-25
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1996-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeRectangularTrimmedSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeRectangularTrimmedSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeRectangularTrimmedSurface.cxx
-// Created:	Thu Jan 25 12:01:33 1996
-// Author:	Frederic MAUPAS
+// Created on: 1996-01-25
+// Created by: Frederic MAUPAS
+// Copyright (c) 1996-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeRectangularTrimmedSurface.ixx>
 

src/StepToGeom/StepToGeom_MakeSphericalSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeSphericalSurface.cdl
--- Created:	Mon Jun 14 16:15:22 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeSphericalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSphericalSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeSphericalSurface.cxx
-// Created:	Fri Jul  2 18:35:52 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-02
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeSphericalSurface.ixx>
 #include <StepGeom_SphericalSurface.hxx>

src/StepToGeom/StepToGeom_MakeSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeSurface.cdl
--- Created:	Tue Jun 22 12:19:43 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-22
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeSurface.cxx
-// Created:	Mon Jul  5 09:56:37 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-05
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:n7 abv 15.02.99: S4132: adding translation of surface_replica
 //:p0 abv 19.02.99: management of 'done' flag improved
 //:s5 abv 22.04.99  Adding debug printouts in catch {} blocks
@@ -25,7 +42,7 @@
 #include <StepGeom_CartesianTransformationOperator3d.hxx>
 #include <StepToGeom_MakeTransformation3d.hxx>
 #include <UnitsMethods.hxx>
-  
+
 #include <BRepBuilderAPI_MakeFace.hxx>
 #include <TopoDS_Face.hxx>
 #include <ShapeAlgo.hxx>

src/StepToGeom/StepToGeom_MakeSurfaceOfLinearExtrusion.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeSurfaceOfLinearExtrusion.cdl
--- Created:	Mon Jun 14 16:16:49 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeSurfaceOfLinearExtrusion from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSurfaceOfLinearExtrusion.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeSurfaceOfLinearExtrusion.cxx
-// Created:	Mon Jul  5 10:04:34 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-05
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 23.10.2001. CTS23496: Surface is not created if extrusion axis have not been succesfully created (StepToGeom_MakeSurfaceOfLinearExtrusion(...) function)
 
 #include <StepToGeom_MakeSurfaceOfLinearExtrusion.ixx>

src/StepToGeom/StepToGeom_MakeSurfaceOfRevolution.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeSurfaceOfRevolution.cdl
--- Created:	Mon Jun 14 16:20:58 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeSurfaceOfRevolution from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSurfaceOfRevolution.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeSurfaceOfRevolution.cxx
-// Created:	Mon Jul  5 10:37:59 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-05
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeSurfaceOfRevolution.ixx>
 #include <StepGeom_SurfaceOfRevolution.hxx>

src/StepToGeom/StepToGeom_MakeSweptSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeSweptSurface.cdl
--- Created:	Tue Jun 22 14:40:20 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-22
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeSweptSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSweptSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeSweptSurface.cxx
-// Created:	Mon Jul  5 10:52:45 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-05
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:p0 abv 19.02.99: management of 'done' flag improved
 
 #include <StepToGeom_MakeSweptSurface.ixx>

src/StepToGeom/StepToGeom_MakeToroidalSurface.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeToroidalSurface.cdl
--- Created:	Mon Jun 14 16:23:51 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeToroidalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeToroidalSurface.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeToroidalSurface.cxx
-// Created:	Mon Jul  5 11:06:16 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-05
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_MakeToroidalSurface.ixx>
 #include <StepGeom_ToroidalSurface.hxx>

src/StepToGeom/StepToGeom_MakeTransformation2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeTransformation2d.cdl
--- Created:	Tue Feb 16 11:14:36 1999
--- Author:	Andrey BETENEV
----Copyright:	 Matra Datavision 1999
+-- Created on: 1999-02-16
+-- Created by: Andrey BETENEV
+-- Copyright (c) 1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeTransformation2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTransformation2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeTransformation3d.cxx
-// Created:	Tue Feb 16 11:18:48 1999
-// Author:	Andrey BETENEV
+// Created on: 1999-02-16
+// Created by: Andrey BETENEV
+// Copyright (c) 1999-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 23.10.2001. CTS23496: If problems with creation of direction occur default direction is used (StepToGeom_MakeTransformation2d(...) function)
 
 #include <StepToGeom_MakeTransformation2d.ixx>

src/StepToGeom/StepToGeom_MakeTransformation3d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeTransformation3d.cdl
--- Created:	Tue Feb 16 11:14:36 1999
--- Author:	Andrey BETENEV
----Copyright:	 Matra Datavision 1999
+-- Created on: 1999-02-16
+-- Created by: Andrey BETENEV
+-- Copyright (c) 1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeTransformation3d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTransformation3d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeTransformation3d.cxx
-// Created:	Tue Feb 16 11:18:48 1999
-// Author:	Andrey BETENEV
+// Created on: 1999-02-16
+// Created by: Andrey BETENEV
+// Copyright (c) 1999-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 23.10.2001. CTS23496: If problems with creation of direction occur default direction is used (StepToGeom_MakeTransformation3d(...) function)
 
 #include <StepToGeom_MakeTransformation3d.ixx>

src/StepToGeom/StepToGeom_MakeTrimmedCurve.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeTrimmedCurve.cdl
--- Created:	Fri Nov  4 10:28:03 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-11-04
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeTrimmedCurve from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTrimmedCurve.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeTrimmedCurve.cxx
-// Created:	Fri Nov  4 10:30:12 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-11-04
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:n9 abv 16.02.99: PRO10107: check parameters on curve with PConfusion()!
 //:o6 abv 18.02.99: r0301_db #63077: application of parameter Factor moved
 //:p0 abv 19.02.99: management of 'done' flag improved

src/StepToGeom/StepToGeom_MakeTrimmedCurve2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeTrimmedCurve.cdl
--- Created:	Fri Nov  4 10:28:03 1994
--- Author:	Frederic MAUPAS
----Copyright:	 Matra Datavision 1994
+-- Created on: 1994-11-04
+-- Created by: Frederic MAUPAS
+-- Copyright (c) 1994-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeTrimmedCurve2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTrimmedCurve2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeTrimmedCurve2d.cxx
-// Created:	Fri Nov  4 10:30:12 1994
-// Author:	Frederic MAUPAS
+// Created on: 1994-11-04
+// Created by: Frederic MAUPAS
+// Copyright (c) 1994-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 //:p0 abv 19.02.99: management of 'done' flag improved
 //:p3 abv 23.02.99: bm4_id_punch_d.stp #1313: shift of parameters on ellipse with R1 < R2
 

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeVectorWithMagnitude.cdl
--- Created:	Mon Jun 14 15:10:06 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeVectorWithMagnitude from StepToGeom
 

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeVectorWithMagnitude.cxx
-// Created:	Mon Jul  5 11:49:43 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-07-05
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 22.10.2001. CTS23496: Vector is not created if direction have not been succesfully created (StepToGeom_MakeVectorWithMagnitude(...) function)
 
 #include <StepToGeom_MakeVectorWithMagnitude.ixx>

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude2d.cdl

@@ -1,7 +1,23 @@
--- File:	StepToGeom_MakeVectorWithMagnitude2d.cdl
--- Created:	Wed Aug  4 11:43:33 1993
--- Author:	Martine LANGLOIS
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-08-04
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 class MakeVectorWithMagnitude2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude2d.cxx

@@ -1,6 +1,23 @@
-// File:	StepToGeom_MakeVectorWithMagnitude2d.cxx
-// Created:	Wed Aug  4 11:45:12 1993
-// Author:	Martine LANGLOIS
+// Created on: 1993-08-04
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 // sln 23.10.2001. CTS23496: Vector is not created if direction have not been succesfully created (StepToGeom_MakeVectorWithMagnitude2d(...) function)
 
 #include <StepToGeom_MakeVectorWithMagnitude2d.ixx>

src/StepToGeom/StepToGeom_Root.cdl

@@ -1,8 +1,23 @@
--- File:	StepToGeom_Root.cdl
--- Created:	Mon Jun 14 11:44:56 1993
--- Author:	Martine LANGLOIS
---		<mla@mastox>
----Copyright:	 Matra Datavision 1993
+-- Created on: 1993-06-14
+-- Created by: Martine LANGLOIS
+-- Copyright (c) 1993-1999 Matra Datavision
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+
 
 private deferred class Root from StepToGeom
 

src/StepToGeom/StepToGeom_Root.cxx

@@ -1,7 +1,23 @@
-// File:	StepToGeom_Root.cxx
-// Created:	Mon Jul  5 14:31:07 1993
-// Author:	Martine LANGLOIS
-//		<mla@mastox>
+// Created on: 1993-07-05
+// Created by: Martine LANGLOIS
+// Copyright (c) 1993-1999 Matra Datavision
+// Copyright (c) 1999-2012 OPEN CASCADE SAS
+//
+// The content of this file is subject to the Open CASCADE Technology Public
+// License Version 6.5 (the "License"). You may not use the content of this file
+// except in compliance with the License. Please obtain a copy of the License
+// at http://www.opencascade.org and read it completely before using this file.
+//
+// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+//
+// The Original Code and all software distributed under the License is
+// distributed on an "AS IS" basis, without warranty of any kind, and the
+// Initial Developer hereby disclaims all such warranties, including without
+// limitation, any warranties of merchantability, fitness for a particular
+// purpose or non-infringement. Please see the License for the specific terms
+// and conditions governing the rights and limitations under the License.
+
 
 #include <StepToGeom_Root.ixx>
 

src/StepToGeom/StepToGeom_WOKSteps.edl

@@ -1,3 +1,20 @@
+-- Copyright (c) 1999-2012 OPEN CASCADE SAS
+--
+-- The content of this file is subject to the Open CASCADE Technology Public
+-- License Version 6.5 (the "License"). You may not use the content of this file
+-- except in compliance with the License. Please obtain a copy of the License
+-- at http://www.opencascade.org and read it completely before using this file.
+--
+-- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
+-- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+--
+-- The Original Code and all software distributed under the License is
+-- distributed on an "AS IS" basis, without warranty of any kind, and the
+-- Initial Developer hereby disclaims all such warranties, including without
+-- limitation, any warranties of merchantability, fitness for a particular
+-- purpose or non-infringement. Please see the License for the specific terms
+-- and conditions governing the rights and limitations under the License.
+