0024428: Implementation of LGPL license

The copying permission statements at the beginning of source files updated to refer to LGPL.
Copyright dates extended till 2014 in advance.

src/StepToGeom/StepToGeom.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-11
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 package StepToGeom
 

src/StepToGeom/StepToGeom_CMPLRS.edl

@@ -1,23 +1,18 @@
 -- Created on: 1997-05-21
 -- Created by: Christian CAILLET
 -- Copyright (c) 1997-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 -- Pb compil gros code HP-UX sous WOK++
 -- trop de warning -> shut up

src/StepToGeom/StepToGeom_MakeAxis1Placement.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeAxis1Placement from StepToGeom
 

src/StepToGeom/StepToGeom_MakeAxis1Placement.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-06-15
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 22.10.2001. CTS23496: If problems with creation of axis's direction occur default direction is used (StepToGeom_MakeAxis1Placement(...) function)
 

src/StepToGeom/StepToGeom_MakeAxis2Placement.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeAxis2Placement from StepToGeom
 

src/StepToGeom/StepToGeom_MakeAxis2Placement.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-01
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 22.10.2001. CTS23496: If problems with creation of direction occur default direction is used (StepToGeom_MakeAxis2Placement(...) function)
 

src/StepToGeom/StepToGeom_MakeAxisPlacement.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-08-26
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeAxisPlacement from StepToGeom
 

src/StepToGeom/StepToGeom_MakeAxisPlacement.cxx

@@ -1,22 +1,18 @@
 // Created on: 1994-08-26
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 23.10.2001. CTS23496: If problems with creation of direction occur default direction is used
 

src/StepToGeom/StepToGeom_MakeBSplineCurve.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBSplineCurve from StepToGeom
     

src/StepToGeom/StepToGeom_MakeBSplineCurve.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-01
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeBSplineCurve.ixx>
 #include <gp_Pnt.hxx>

src/StepToGeom/StepToGeom_MakeBSplineCurve.pxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 {
   Handle(StepGeom_BSplineCurveWithKnots)   BSCW;

src/StepToGeom/StepToGeom_MakeBSplineCurve2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-07-06
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBSplineCurve2d from StepToGeom
     

src/StepToGeom/StepToGeom_MakeBSplineCurve2d.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeBSplineCurve2d.ixx>
 #include <gp_Pnt2d.hxx>

src/StepToGeom/StepToGeom_MakeBSplineSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBSplineSurface from StepToGeom
         

src/StepToGeom/StepToGeom_MakeBSplineSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeBSplineSurface.ixx>
 #include <StepGeom_BSplineSurfaceWithKnots.hxx>

src/StepToGeom/StepToGeom_MakeBoundedCurve.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-21
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBoundedCurve from StepToGeom
 

src/StepToGeom/StepToGeom_MakeBoundedCurve.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:n6 abv 15.02.99: S4132: adding translation of polyline
 //:p0 abv 19.02.99: management of 'done' flag improved; trimmed_curve treated

src/StepToGeom/StepToGeom_MakeBoundedCurve2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-08-04
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBoundedCurve2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeBoundedCurve2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-08-04
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:n6 abv 15.02.99: S4132: adding translation of polyline
 //:p0 abv 19.02.99: management of 'done' flag improved

src/StepToGeom/StepToGeom_MakeBoundedSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBoundedSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeBoundedSurface.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:p0 abv 19.02.99: management of 'done' flag improved
 //:j7 abv 05.04.99: S4136: ass-tol2.stp #9861: avoid using CheckSurfaceClosure

src/StepToGeom/StepToGeom_MakeCartesianPoint.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-11
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCartesianPoint from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCartesianPoint.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeCartesianPoint.ixx>
 #include <StepGeom_CartesianPoint.hxx>

src/StepToGeom/StepToGeom_MakeCartesianPoint2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-07-06
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCartesianPoint2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCartesianPoint2d.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeCartesianPoint2d.ixx>
 #include <StepGeom_CartesianPoint.hxx>

src/StepToGeom/StepToGeom_MakeCircle.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCircle from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCircle.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeCircle.ixx>
 #include <StepGeom_Circle.hxx>

src/StepToGeom/StepToGeom_MakeCircle2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-08-26
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCircle2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCircle2d.cxx

@@ -1,23 +1,18 @@
 // Created on: 1994-08-26
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeCircle2d.ixx>
 #include <StepGeom_Circle.hxx>

src/StepToGeom/StepToGeom_MakeConic.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-21
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeConic from StepToGeom
 

src/StepToGeom/StepToGeom_MakeConic.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:p0 abv 19.02.99: management of 'done' flag improved
 

src/StepToGeom/StepToGeom_MakeConic2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-08-26
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeConic2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeConic2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1994-08-26
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:p0 abv 19.02.99: management of 'done' flag improved
 

src/StepToGeom/StepToGeom_MakeConicalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeConicalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeConicalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeConicalSurface.ixx>
 #include <Geom_ConicalSurface.hxx>

src/StepToGeom/StepToGeom_MakeCurve.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-21
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCurve from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCurve.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:n7 abv 16.02.99: S4132: adding translation of curve_replica
 //:o2 abv 17.02.99: S4132: adding translation of offset_curve_3d

src/StepToGeom/StepToGeom_MakeCurve2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-08-04
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCurve2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCurve2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-08-04
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:n7 abv 15.02.99: S4132: adding translation of curve_replica
 //:p0 abv 19.02.99: management of 'done' flag improved

src/StepToGeom/StepToGeom_MakeCylindricalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCylindricalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeCylindricalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeCylindricalSurface.ixx>
 #include <Geom_CylindricalSurface.hxx>

src/StepToGeom/StepToGeom_MakeDirection.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeDirection from StepToGeom
 

src/StepToGeom/StepToGeom_MakeDirection.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 22.10.2001. CTS23496: Direction is not created if it has null magnitude (StepToGeom_MakeDirection(...) function)
 

src/StepToGeom/StepToGeom_MakeDirection2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-08-04
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeDirection2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeDirection2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-08-04
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 23.10.2001. CTS23496: Direction is not created if it has null magnitude (StepToGeom_MakeDirection2d(...) function)
 

src/StepToGeom/StepToGeom_MakeElementarySurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeElementarySurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeElementarySurface.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:p0 abv 19.02.99: management of 'done' flag improved
 

src/StepToGeom/StepToGeom_MakeEllipse.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-09-01
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeEllipse from StepToGeom
 

src/StepToGeom/StepToGeom_MakeEllipse.cxx

@@ -1,22 +1,18 @@
 // Created on: 1994-09-01
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:o9 abv 19.02.99: bm4_id_punch_b.stp #678: treatment of ellipse with minR > maxR
 //                  NOTE: parametrisation of resulting ellipse shifted on pi/2

src/StepToGeom/StepToGeom_MakeEllipse2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-09-01
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeEllipse2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeEllipse2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1994-09-01
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:o9 abv 19.02.99: bm4_id_punch_b.stp #678: treatment of minR > maxR
 //                  NOTE: parametrisation of resulting ellipse shifted on pi/2

src/StepToGeom/StepToGeom_MakeHyperbola.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-09-08
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeHyperbola from StepToGeom
 

src/StepToGeom/StepToGeom_MakeHyperbola.cxx

@@ -1,23 +1,18 @@
 // Created on: 1994-09-08
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeHyperbola.ixx>
 #include <StepGeom_Hyperbola.hxx>

src/StepToGeom/StepToGeom_MakeHyperbola2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1995-05-09
 -- Created by: Dieter THIEMANN
 -- Copyright (c) 1995-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeHyperbola2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeHyperbola2d.cxx

@@ -1,23 +1,18 @@
 // Created on: 1994-09-01
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeHyperbola2d.ixx>
 #include <StepGeom_Hyperbola.hxx>

src/StepToGeom/StepToGeom_MakeLine.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeLine from StepToGeom
 

src/StepToGeom/StepToGeom_MakeLine.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 22.10.2001. CTS23496: Line is not created if direction have not been succesfully created (StepToGeom_MakeLine(...) function)
 

src/StepToGeom/StepToGeom_MakeLine2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-08-04
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeLine2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeLine2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-08-04
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 23.10.2001. CTS23496: Line is not created if direction have not been succesfully created (StepToGeom_MakeLine2d(...) function)
 

src/StepToGeom/StepToGeom_MakeParabola.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-09-08
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeParabola from StepToGeom
 

src/StepToGeom/StepToGeom_MakeParabola.cxx

@@ -1,23 +1,18 @@
 // Created on: 1994-09-08
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeParabola.ixx>
 #include <StepGeom_Parabola.hxx>

src/StepToGeom/StepToGeom_MakeParabola2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1995-05-09
 -- Created by: Dieter THIEMANN
 -- Copyright (c) 1995-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeParabola2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeParabola2d.cxx

@@ -1,23 +1,18 @@
 // Created on: 1994-09-01
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeParabola2d.ixx>
 #include <StepGeom_Parabola.hxx>

src/StepToGeom/StepToGeom_MakePlane.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakePlane from StepToGeom
 

src/StepToGeom/StepToGeom_MakePlane.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakePlane.ixx>
 #include <StepGeom_Axis2Placement3d.hxx>

src/StepToGeom/StepToGeom_MakePolyline.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1999-02-15
 -- Created by: Andrey BETENEV
 -- Copyright (c) 1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakePolyline from StepToGeom inherits Root from StepToGeom
 

src/StepToGeom/StepToGeom_MakePolyline.cxx

@@ -1,23 +1,18 @@
 // Created on: 1999-02-15
 // Created by: Andrey BETENEV
 // Copyright (c) 1999-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakePolyline.ixx>
 #include <StepToGeom_MakeCartesianPoint.hxx>

src/StepToGeom/StepToGeom_MakePolyline2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1999-02-15
 -- Created by: Andrey BETENEV
 -- Copyright (c) 1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakePolyline2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakePolyline2d.cxx

@@ -1,23 +1,18 @@
 // Created on: 1999-02-15
 // Created by: Andrey BETENEV
 // Copyright (c) 1999-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakePolyline2d.ixx>
 #include <StepToGeom_MakeCartesianPoint2d.hxx>

src/StepToGeom/StepToGeom_MakeRectangularTrimmedSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1996-01-25
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1996-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeRectangularTrimmedSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeRectangularTrimmedSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1996-01-25
 // Created by: Frederic MAUPAS
 // Copyright (c) 1996-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeRectangularTrimmedSurface.ixx>
 

src/StepToGeom/StepToGeom_MakeSphericalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSphericalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSphericalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-02
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeSphericalSurface.ixx>
 #include <StepGeom_SphericalSurface.hxx>

src/StepToGeom/StepToGeom_MakeSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSurface.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:n7 abv 15.02.99: S4132: adding translation of surface_replica
 //:p0 abv 19.02.99: management of 'done' flag improved

src/StepToGeom/StepToGeom_MakeSurfaceOfLinearExtrusion.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSurfaceOfLinearExtrusion from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSurfaceOfLinearExtrusion.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 23.10.2001. CTS23496: Surface is not created if extrusion axis have not been succesfully created (StepToGeom_MakeSurfaceOfLinearExtrusion(...) function)
 

src/StepToGeom/StepToGeom_MakeSurfaceOfRevolution.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSurfaceOfRevolution from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSurfaceOfRevolution.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeSurfaceOfRevolution.ixx>
 #include <StepGeom_SurfaceOfRevolution.hxx>

src/StepToGeom/StepToGeom_MakeSweptSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSweptSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeSweptSurface.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:p0 abv 19.02.99: management of 'done' flag improved
 

src/StepToGeom/StepToGeom_MakeToroidalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeToroidalSurface from StepToGeom
 

src/StepToGeom/StepToGeom_MakeToroidalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_MakeToroidalSurface.ixx>
 #include <StepGeom_ToroidalSurface.hxx>

src/StepToGeom/StepToGeom_MakeTransformation2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1999-02-16
 -- Created by: Andrey BETENEV
 -- Copyright (c) 1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeTransformation2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTransformation2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1999-02-16
 // Created by: Andrey BETENEV
 // Copyright (c) 1999-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 23.10.2001. CTS23496: If problems with creation of direction occur default direction is used (StepToGeom_MakeTransformation2d(...) function)
 

src/StepToGeom/StepToGeom_MakeTransformation3d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1999-02-16
 -- Created by: Andrey BETENEV
 -- Copyright (c) 1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeTransformation3d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTransformation3d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1999-02-16
 // Created by: Andrey BETENEV
 // Copyright (c) 1999-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 23.10.2001. CTS23496: If problems with creation of direction occur default direction is used (StepToGeom_MakeTransformation3d(...) function)
 

src/StepToGeom/StepToGeom_MakeTrimmedCurve.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-11-04
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeTrimmedCurve from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTrimmedCurve.cxx

@@ -1,22 +1,18 @@
 // Created on: 1994-11-04
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:n9 abv 16.02.99: PRO10107: check parameters on curve with PConfusion()!
 //:o6 abv 18.02.99: r0301_db #63077: application of parameter Factor moved

src/StepToGeom/StepToGeom_MakeTrimmedCurve2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1994-11-04
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeTrimmedCurve2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeTrimmedCurve2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1994-11-04
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //:p0 abv 19.02.99: management of 'done' flag improved
 //:p3 abv 23.02.99: bm4_id_punch_d.stp #1313: shift of parameters on ellipse with R1 < R2

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeVectorWithMagnitude from StepToGeom
 

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-07-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 22.10.2001. CTS23496: Vector is not created if direction have not been succesfully created (StepToGeom_MakeVectorWithMagnitude(...) function)
 

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude2d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-08-04
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeVectorWithMagnitude2d from StepToGeom
 

src/StepToGeom/StepToGeom_MakeVectorWithMagnitude2d.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-08-04
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 // sln 23.10.2001. CTS23496: Vector is not created if direction have not been succesfully created (StepToGeom_MakeVectorWithMagnitude2d(...) function)
 

src/StepToGeom/StepToGeom_Root.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 private deferred class Root from StepToGeom
 

src/StepToGeom/StepToGeom_Root.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <StepToGeom_Root.ixx>
 

src/StepToGeom/StepToGeom_WOKSteps.edl

@@ -1,22 +1,15 @@
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
-
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 @set %WOKSteps_UseSourceInclude = "yes";