0024428: Implementation of LGPL license

The copying permission statements at the beginning of source files updated to refer to LGPL.
Copyright dates extended till 2014 in advance.

src/GeomToStep/GeomToStep.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-11
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 package GeomToStep
 

src/GeomToStep/GeomToStep_MakeAxis1Placement.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeAxis1Placement from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeAxis1Placement.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-15
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeAxis1Placement.ixx>
 #include <GeomToStep_MakeDirection.hxx>

src/GeomToStep/GeomToStep_MakeAxis1Placement_gen.pxx

@@ -1,24 +1,18 @@
 // Created on: 1993-06-23
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Handle(StepGeom_Axis1Placement) Axe = new StepGeom_Axis1Placement;
   Handle(StepGeom_CartesianPoint) P;

src/GeomToStep/GeomToStep_MakeAxis2Placement2d.cdl

@@ -1,24 +1,18 @@
 -- Created on: 1994-08-26
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeAxis2Placement2d from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeAxis2Placement2d.cxx

@@ -1,24 +1,18 @@
 // Created on: 1994-08-26
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeAxis2Placement2d.ixx>
 #include <StepGeom_Direction.hxx>

src/GeomToStep/GeomToStep_MakeAxis2Placement3d.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeAxis2Placement3d from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeAxis2Placement3d.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-16
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeAxis2Placement3d.ixx>
 #include <StepGeom_Direction.hxx>

src/GeomToStep/GeomToStep_MakeBSplineCurveWithKnots.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-08-05
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBSplineCurveWithKnots from GeomToStep inherits
     Root from GeomToStep

src/GeomToStep/GeomToStep_MakeBSplineCurveWithKnots.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-08-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeBSplineCurveWithKnots.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeBSplineCurveWithKnotsAndRationalBSplineCurve.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBSplineCurveWithKnotsAndRationalBSplineCurve from GeomToStep inherits
     Root from GeomToStep

src/GeomToStep/GeomToStep_MakeBSplineCurveWithKnotsAndRationalBSplineCurve.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-16
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeBSplineCurveWithKnotsAndRationalBSplineCurve.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeBSplineCurveWithKnotsAndRationalBSplineCurve_gen.pxx

@@ -1,24 +1,18 @@
 // Created on: 1993-06-23
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Handle(StepGeom_BSplineCurveWithKnotsAndRationalBSplineCurve) BSWK;
   Standard_Integer Deg, N, i, Nknots, itampon;

src/GeomToStep/GeomToStep_MakeBSplineCurveWithKnots_gen.pxx

@@ -1,24 +1,18 @@
 // Created on: 1993-08-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Handle(StepGeom_BSplineCurveWithKnots) BSWK;
   Standard_Integer Deg, N, i, Nknots, itampon;

src/GeomToStep/GeomToStep_MakeBSplineSurfaceWithKnots.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-08-05
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBSplineSurfaceWithKnots from GeomToStep  
     inherits Root from GeomToStep

src/GeomToStep/GeomToStep_MakeBSplineSurfaceWithKnots.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-08-05
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeBSplineSurfaceWithKnots.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeBSplineSurfaceWithKnotsAndRationalBSplineSurface.cdl

@@ -1,22 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 --              .cdl
 

src/GeomToStep/GeomToStep_MakeBSplineSurfaceWithKnotsAndRationalBSplineSurface.cxx

@@ -1,22 +1,18 @@
 // Created on: 1993-06-22
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 //              .cxx
 

src/GeomToStep/GeomToStep_MakeBoundedCurve.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-21
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBoundedCurve from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeBoundedCurve.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-21
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeBoundedCurve.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeBoundedSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeBoundedSurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeBoundedSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-22
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeBoundedSurface.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeCartesianPoint.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-11
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCartesianPoint from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeCartesianPoint.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-15
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeCartesianPoint.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeCircle.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCircle from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeCircle.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-16
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeCircle.ixx>
 #include <GeomToStep_MakeAxis2Placement3d.hxx>

src/GeomToStep/GeomToStep_MakeCircle_gen.pxx

@@ -1,24 +1,18 @@
 // Created on: 1993-06-23
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Handle(StepGeom_Circle) CStep = new StepGeom_Circle;
   StepGeom_Axis2Placement Ax2;

src/GeomToStep/GeomToStep_MakeConic.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-21
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeConic from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeConic.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-21
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeConic.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeConicalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeConicalSurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeConicalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-16
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeConicalSurface.ixx>
 #include <StepGeom_Axis2Placement3d.hxx>

src/GeomToStep/GeomToStep_MakeCurve.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-21
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCurve from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeCurve.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-21
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeCurve.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeCylindricalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeCylindricalSurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeCylindricalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeCylindricalSurface.ixx>
 #include <StepGeom_Axis2Placement3d.hxx>

src/GeomToStep/GeomToStep_MakeDirection.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeDirection from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeDirection.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeDirection.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeElementarySurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeElementarySurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeElementarySurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-22
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeElementarySurface.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeEllipse.cdl

@@ -1,24 +1,18 @@
 -- Created on: 1994-09-02
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1994-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeEllipse from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeEllipse.cxx

@@ -1,24 +1,18 @@
 // Created on: 1994-09-02
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeEllipse.ixx>
 #include <GeomToStep_MakeAxis2Placement3d.hxx>

src/GeomToStep/GeomToStep_MakeEllipse_gen.pxx

@@ -1,24 +1,18 @@
 // Created on: 1994-09-02
 // Created by: Frederic MAUPAS
 // Copyright (c) 1994-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Handle(StepGeom_Ellipse) EStep = new StepGeom_Ellipse;
   StepGeom_Axis2Placement Ax2;

src/GeomToStep/GeomToStep_MakeHyperbola.cdl

@@ -1,24 +1,18 @@
 -- Created on: 1995-05-04
 -- Created by: Dieter THIEMANN
 -- Copyright (c) 1995-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeHyperbola from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeHyperbola.cxx

@@ -1,19 +1,15 @@
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeHyperbola.ixx>
 

src/GeomToStep/GeomToStep_MakeLine.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeLine from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeLine.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeLine.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeLine_gen.pxx

@@ -1,24 +1,18 @@
 // Created on: 1993-06-23
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Handle(StepGeom_Line) Lin = new StepGeom_Line;
   Handle(StepGeom_CartesianPoint) aPnt;

src/GeomToStep/GeomToStep_MakeParabola.cdl

@@ -1,24 +1,18 @@
 -- Created on: 1995-05-04
 -- Created by: Dieter THIEMANN
 -- Copyright (c) 1995-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeParabola from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeParabola.cxx

@@ -1,19 +1,15 @@
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeParabola.ixx>
 

src/GeomToStep/GeomToStep_MakePlane.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakePlane from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakePlane.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakePlane.ixx>
 #include <GeomToStep_MakePlane.hxx>

src/GeomToStep/GeomToStep_MakePolyline.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-07-12
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakePolyline from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakePolyline.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-12
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakePolyline.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakePolyline_gen.pxx

@@ -1,23 +1,18 @@
 // Created on: 1993-07-12
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Standard_Integer                             N, i;
   Handle(StepGeom_HArray1OfCartesianPoint) aPoints;

src/GeomToStep/GeomToStep_MakeRectangularTrimmedSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1996-01-25
 -- Created by: Frederic MAUPAS
 -- Copyright (c) 1996-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeRectangularTrimmedSurface from GeomToStep  
     inherits Root from GeomToStep

src/GeomToStep/GeomToStep_MakeRectangularTrimmedSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1996-01-25
 // Created by: Frederic MAUPAS
 // Copyright (c) 1996-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeRectangularTrimmedSurface.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeSphericalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSphericalSurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeSphericalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeSphericalSurface.ixx>
 #include <GeomToStep_MakeAxis2Placement3d.hxx>

src/GeomToStep/GeomToStep_MakeSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-22
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeSurface.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeSurfaceOfLinearExtrusion.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSurfaceOfLinearExtrusion from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeSurfaceOfLinearExtrusion.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeSurfaceOfLinearExtrusion.ixx>
 #include <GeomToStep_MakeVector.hxx>

src/GeomToStep/GeomToStep_MakeSurfaceOfRevolution.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSurfaceOfRevolution from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeSurfaceOfRevolution.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeSurfaceOfRevolution.ixx>
 #include <GeomToStep_MakeAxis1Placement.hxx>

src/GeomToStep/GeomToStep_MakeSweptSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-22
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeSweptSurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeSweptSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-22
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeSweptSurface.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeToroidalSurface.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeToroidalSurface from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeToroidalSurface.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeToroidalSurface.ixx>
 #include <GeomToStep_MakeAxis2Placement3d.hxx>

src/GeomToStep/GeomToStep_MakeVector.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 class MakeVector from GeomToStep inherits Root from GeomToStep
 

src/GeomToStep/GeomToStep_MakeVector.cxx

@@ -1,23 +1,18 @@
 // Created on: 1993-06-17
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_MakeVector.ixx>
 #include <StdFail_NotDone.hxx>

src/GeomToStep/GeomToStep_MakeVector_gen.pxx

@@ -1,24 +1,18 @@
 // Created on: 1993-06-22
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 Handle(StepGeom_Vector) Vect = new StepGeom_Vector;
   Handle(StepGeom_Direction) aDirection;

src/GeomToStep/GeomToStep_Root.cdl

@@ -1,23 +1,18 @@
 -- Created on: 1993-06-14
 -- Created by: Martine LANGLOIS
 -- Copyright (c) 1993-1999 Matra Datavision
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 private deferred class Root from GeomToStep
 

src/GeomToStep/GeomToStep_Root.cxx

@@ -1,24 +1,18 @@
 // Created on: 1993-06-25
 // Created by: Martine LANGLOIS
 // Copyright (c) 1993-1999 Matra Datavision
-// Copyright (c) 1999-2012 OPEN CASCADE SAS
+// Copyright (c) 1999-2014 OPEN CASCADE SAS
 //
-// The content of this file is subject to the Open CASCADE Technology Public
-// License Version 6.5 (the "License"). You may not use the content of this file
-// except in compliance with the License. Please obtain a copy of the License
-// at http://www.opencascade.org and read it completely before using this file.
+// This file is part of Open CASCADE Technology software library.
 //
-// The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
-// main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+// This library is free software; you can redistribute it and / or modify it
+// under the terms of the GNU Lesser General Public version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
 //
-// The Original Code and all software distributed under the License is
-// distributed on an "AS IS" basis, without warranty of any kind, and the
-// Initial Developer hereby disclaims all such warranties, including without
-// limitation, any warranties of merchantability, fitness for a particular
-// purpose or non-infringement. Please see the License for the specific terms
-// and conditions governing the rights and limitations under the License.
-
-
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
 
 #include <GeomToStep_Root.ixx>
 

src/GeomToStep/GeomToStep_WOKSteps.edl

@@ -1,22 +1,15 @@
--- Copyright (c) 1999-2012 OPEN CASCADE SAS
+-- Copyright (c) 1999-2014 OPEN CASCADE SAS
 --
--- The content of this file is subject to the Open CASCADE Technology Public
--- License Version 6.5 (the "License"). You may not use the content of this file
--- except in compliance with the License. Please obtain a copy of the License
--- at http://www.opencascade.org and read it completely before using this file.
+-- This file is part of Open CASCADE Technology software library.
 --
--- The Initial Developer of the Original Code is Open CASCADE S.A.S., having its
--- main offices at: 1, place des Freres Montgolfier, 78280 Guyancourt, France.
+-- This library is free software; you can redistribute it and / or modify it
+-- under the terms of the GNU Lesser General Public version 2.1 as published
+-- by the Free Software Foundation, with special exception defined in the file
+-- OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+-- distribution for complete text of the license and disclaimer of any warranty.
 --
--- The Original Code and all software distributed under the License is
--- distributed on an "AS IS" basis, without warranty of any kind, and the
--- Initial Developer hereby disclaims all such warranties, including without
--- limitation, any warranties of merchantability, fitness for a particular
--- purpose or non-infringement. Please see the License for the specific terms
--- and conditions governing the rights and limitations under the License.
-
-
-
+-- Alternatively, this file may be used under the terms of Open CASCADE
+-- commercial license or contractual agreement.
 
 @set %WOKSteps_UseSourceInclude = "yes";