0033648: Modeling Algorithms - Bad partition result

Removed unnecessary tolerance increase for Line\Line intersection.
Tolerance increasing logic for some specific curve types
  was added with #26619.
Original fix had no test for Line/Line case and
  theoretically was added as a possible issue.
After research Line/Line case doesn't need a special tolerance case.

adm/cmake/tbb.cmake

@@ -56,13 +56,17 @@ if (WIN32)
       list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TBB_INCLUDE_DIR)
     endif()
 
+    # Get installed configuration of tbb
+    get_target_property (TARGET_TBB_IMPORT_CONFS TBB::tbb IMPORTED_CONFIGURATIONS)
+    list (GET TARGET_TBB_IMPORT_CONFS 0 CHOSEN_IMPORT_CONF)
+
     separate_arguments (CSF_TBB)
     foreach (LIB IN LISTS CSF_TBB)
       string(TOLOWER "${LIB}" LIB_LOWER)
       string(TOUPPER "${LIB}" LIB_UPPER)
 
       # Achive *.lib files and directory containing it.
-      get_target_property (TBB_LIB_FILE "TBB::${LIB_LOWER}" IMPORTED_IMPLIB_RELEASE)
+      get_target_property (TBB_LIB_FILE "TBB::${LIB_LOWER}" IMPORTED_IMPLIB_${CHOSEN_IMPORT_CONF})
       # Reserve cache variable for *.lib.
       if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_LIBRARY)
         set (3RDPARTY_${LIB_UPPER}_LIBRARY "" CACHE FILEPATH "${LIB_UPPER} library (*.lib)")
@@ -89,7 +93,7 @@ if (WIN32)
       endif()
 
       # Achive *.dll files and directory containing it.
-      get_target_property (TBB_DLL_FILE "TBB::${LIB_LOWER}" IMPORTED_LOCATION_RELEASE)
+      get_target_property (TBB_DLL_FILE "TBB::${LIB_LOWER}" IMPORTED_LOCATION_${CHOSEN_IMPORT_CONF})
       # Reserve cache variable for *.dll.
       if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_DLL)
         set (3RDPARTY_${LIB_UPPER}_DLL "" CACHE FILEPATH "${LIB_UPPER} library (*.dll)")
@@ -185,13 +189,17 @@ else ()
     list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TBB_INCLUDE_DIR)
   endif()
 
+  # Get installed configuration of tbb
+  get_target_property (TARGET_TBB_IMPORT_CONFS TBB::tbb IMPORTED_CONFIGURATIONS)
+  list (GET TARGET_TBB_IMPORT_CONFS 0 CHOSEN_IMPORT_CONF)
+
   separate_arguments (CSF_TBB)
   foreach (LIB IN LISTS CSF_TBB)
     string(TOLOWER "${LIB}" LIB_LOWER)
     string(TOUPPER "${LIB}" LIB_UPPER)
 
     # Achive *.so files and directory containing it.
-    get_target_property (TBB_SO_FILE "TBB::${LIB_LOWER}" IMPORTED_LOCATION_RELEASE)
+    get_target_property (TBB_SO_FILE "TBB::${LIB_LOWER}" IMPORTED_LOCATION_${CHOSEN_IMPORT_CONF})
     # Reserve cache variable for *.so.
     if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_LIBRARY)
       set (3RDPARTY_${LIB_UPPER}_LIBRARY "" CACHE FILEPATH "${LIB_UPPER} library (*.so)")

src/BOPAlgo/BOPAlgo_PaveFiller_3.cxx

@@ -341,12 +341,8 @@ void BOPAlgo_PaveFiller::PerformEE(const Message_ProgressRange& theRange)
       GeomAbs_CurveType aType1 = aBAC1.GetType();
       GeomAbs_CurveType aType2 = aBAC2.GetType();
       //
-      bAnalytical = (((aType1 == GeomAbs_Line) &&
-                      (aType2 == GeomAbs_Line ||
-                       aType2 == GeomAbs_Circle)) ||
-                     ((aType2 == GeomAbs_Line) &&
-                      (aType1 == GeomAbs_Line ||
-                       aType1 == GeomAbs_Circle)));
+      bAnalytical = (aType1 == GeomAbs_Line && aType2 == GeomAbs_Circle) ||
+                    (aType1 == GeomAbs_Circle && aType2 == GeomAbs_Line);
     }
     //
     for (i=1; i<=aNbCPrts; ++i) {
@@ -443,7 +439,7 @@ void BOPAlgo_PaveFiller::PerformEE(const Message_ProgressRange& theRange)
 
           Standard_Real aTolVnew = BRep_Tool::Tolerance(aVnew);
           if (bAnalytical) {
-            // increase tolerance for Line/Line intersection, but do not update 
+            // increase tolerance for Line/Circle intersection, but do not update 
             // the vertex till its intersection with some other shape
             Standard_Real aTolMin = (BRepAdaptor_Curve(aE1).GetType() == GeomAbs_Line) ?
               (aCR1.Last() - aCR1.First()) / 2. : (aCR2.Last() - aCR2.First()) / 2.;

src/DE/DE_ShapeFixConfigurationNode.cxx

@@ -0,0 +1,492 @@
+// Copyright (c) 2024 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#include <DE_ShapeFixConfigurationNode.hxx>
+
+#include <DE_ConfigurationContext.hxx>
+#include <DE_PluginHolder.hxx>
+#include <DE_Wrapper.hxx>
+
+IMPLEMENT_STANDARD_RTTIEXT(DE_ShapeFixConfigurationNode, DE_ConfigurationNode)
+
+namespace
+{
+  static const TCollection_AsciiString& THE_CONFIGURATION_SCOPE()
+  {
+    static const TCollection_AsciiString aScope = "provider";
+    return aScope;
+  }
+}
+
+//=======================================================================
+// function : DE_ShapeFixConfigurationNode
+// purpose  :
+//=======================================================================
+DE_ShapeFixConfigurationNode::DE_ShapeFixConfigurationNode()
+  : DE_ConfigurationNode()
+{}
+
+//=======================================================================
+// function : DE_ShapeFixConfigurationNode
+// purpose  :
+//=======================================================================
+DE_ShapeFixConfigurationNode::DE_ShapeFixConfigurationNode(const Handle(DE_ShapeFixConfigurationNode)& theNode)
+  : DE_ConfigurationNode(theNode)
+{
+}
+
+//=======================================================================
+// function : Load
+// purpose  :
+//=======================================================================
+bool DE_ShapeFixConfigurationNode::Load(const Handle(DE_ConfigurationContext)& theResource)
+{
+  TCollection_AsciiString aScope = THE_CONFIGURATION_SCOPE() + "." + GetFormat() + "." + GetVendor() + ".healing";
+
+  HealingParameters.Tolerance3d = theResource->RealVal("tolerance3d", HealingParameters.Tolerance3d, aScope);
+  HealingParameters.MaxTolerance3d = theResource->RealVal("max.tolerance3d", HealingParameters.MaxTolerance3d, aScope);
+  HealingParameters.MinTolerance3d = theResource->RealVal("min.tolerance3d", HealingParameters.MinTolerance3d, aScope);
+  HealingParameters.FixFreeShellMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("free.shell", (int)HealingParameters.FixFreeShellMode, aScope);
+  HealingParameters.FixFreeFaceMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("free.face", (int)HealingParameters.FixFreeFaceMode, aScope);
+  HealingParameters.FixFreeWireMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("free.wire", (int)HealingParameters.FixFreeWireMode, aScope);
+  HealingParameters.FixSameParameterMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("same.parameter", (int)HealingParameters.FixSameParameterMode, aScope);
+  HealingParameters.FixSolidMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("solid", (int)HealingParameters.FixSolidMode, aScope);
+  HealingParameters.FixShellOrientationMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("shell.orientation", (int)HealingParameters.FixShellOrientationMode, aScope);
+  HealingParameters.CreateOpenSolidMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("create.open.solid", (int)HealingParameters.CreateOpenSolidMode, aScope);
+  HealingParameters.FixShellMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("shell", (int)HealingParameters.FixShellMode, aScope);
+  HealingParameters.FixFaceOrientationMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("face.orientation", (int)HealingParameters.FixFaceOrientationMode, aScope);
+  HealingParameters.FixFaceMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("face", (int)HealingParameters.FixFaceMode, aScope);
+  HealingParameters.FixWireMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("wire", (int)HealingParameters.FixWireMode, aScope);
+  HealingParameters.FixOrientationMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("orientation", (int)HealingParameters.FixOrientationMode, aScope);
+  HealingParameters.FixAddNaturalBoundMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("add.natural.bound", (int)HealingParameters.FixAddNaturalBoundMode, aScope);
+  HealingParameters.FixMissingSeamMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("missing.seam", (int)HealingParameters.FixMissingSeamMode, aScope);
+  HealingParameters.FixSmallAreaWireMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("small.area.wire", (int)HealingParameters.FixSmallAreaWireMode, aScope);
+  HealingParameters.RemoveSmallAreaFaceMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("remove.small.area.face", (int)HealingParameters.RemoveSmallAreaFaceMode, aScope);
+  HealingParameters.FixIntersectingWiresMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("intersecting.wires", (int)HealingParameters.FixIntersectingWiresMode, aScope);
+  HealingParameters.FixLoopWiresMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("loop.wires", (int)HealingParameters.FixLoopWiresMode, aScope);
+  HealingParameters.FixSplitFaceMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("split.face", (int)HealingParameters.FixSplitFaceMode, aScope);
+  HealingParameters.AutoCorrectPrecisionMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("auto.correct.precision", (int)HealingParameters.AutoCorrectPrecisionMode, aScope);
+  HealingParameters.ModifyTopologyMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("modify.topology", (int)HealingParameters.ModifyTopologyMode, aScope);
+  HealingParameters.ModifyGeometryMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("modify.geometry", (int)HealingParameters.ModifyGeometryMode, aScope);
+  HealingParameters.ClosedWireMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("closed.wire", (int)HealingParameters.ClosedWireMode, aScope);
+  HealingParameters.PreferencePCurveMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("preference.pcurve", (int)HealingParameters.PreferencePCurveMode, aScope);
+  HealingParameters.FixReorderMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("reorder.edges", (int)HealingParameters.FixReorderMode, aScope);
+  HealingParameters.FixSmallMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("remove.small.edges", (int)HealingParameters.FixSmallMode, aScope);
+  HealingParameters.FixConnectedMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("connected.edges", (int)HealingParameters.FixConnectedMode, aScope);
+  HealingParameters.FixEdgeCurvesMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("edge.curves", (int)HealingParameters.FixEdgeCurvesMode, aScope);
+  HealingParameters.FixDegeneratedMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("add.degenerated.edges", (int)HealingParameters.FixDegeneratedMode, aScope);
+  HealingParameters.FixLackingMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("add.lacking.edges", (int)HealingParameters.FixLackingMode, aScope);
+  HealingParameters.FixSelfIntersectionMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("selfintersection", (int)HealingParameters.FixSelfIntersectionMode, aScope);
+  HealingParameters.RemoveLoopMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("remove.loop", (int)HealingParameters.RemoveLoopMode, aScope);
+  HealingParameters.FixReversed2dMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("reversed2d", (int)HealingParameters.FixReversed2dMode, aScope);
+  HealingParameters.FixRemovePCurveMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("remove.pcurve", (int)HealingParameters.FixRemovePCurveMode, aScope);
+  HealingParameters.FixRemoveCurve3dMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("remove.curve3d", (int)HealingParameters.FixRemoveCurve3dMode, aScope);
+  HealingParameters.FixAddPCurveMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("add.pcurve", (int)HealingParameters.FixAddPCurveMode, aScope);
+  HealingParameters.FixAddCurve3dMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("add.curve3d", (int)HealingParameters.FixAddCurve3dMode, aScope);
+  HealingParameters.FixSeamMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("correct.order.in.seam", (int)HealingParameters.FixSeamMode, aScope);
+  HealingParameters.FixShiftedMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("shifted", (int)HealingParameters.FixShiftedMode, aScope);
+  HealingParameters.FixEdgeSameParameterMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("edge.same.parameter", (int)HealingParameters.FixEdgeSameParameterMode, aScope);
+  HealingParameters.FixNotchedEdgesMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("notched.edges", (int)HealingParameters.FixNotchedEdgesMode, aScope);
+  HealingParameters.FixTailMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("tail", (int)HealingParameters.FixTailMode, aScope);
+  HealingParameters.MaxTailAngle = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("max.tail.angle", (int)HealingParameters.MaxTailAngle, aScope);
+  HealingParameters.MaxTailWidth = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("max.tail.width", (int)HealingParameters.MaxTailWidth, aScope);
+  HealingParameters.FixSelfIntersectingEdgeMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("selfintersecting.edge", (int)HealingParameters.FixSelfIntersectingEdgeMode, aScope);
+  HealingParameters.FixIntersectingEdgesMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("intersecting.edges", (int)HealingParameters.FixIntersectingEdgesMode, aScope);
+  HealingParameters.FixNonAdjacentIntersectingEdgesMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("nonadjacent.intersecting.edges", (int)HealingParameters.FixNonAdjacentIntersectingEdgesMode, aScope);
+  HealingParameters.FixVertexPositionMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("vertex.position", (int)HealingParameters.FixVertexPositionMode, aScope);
+  HealingParameters.FixVertexToleranceMode = (DE_ShapeFixParameters::FixMode)
+    theResource->IntegerVal("vertex.tolerance", (int)HealingParameters.FixVertexToleranceMode, aScope);
+
+  return true;
+}
+
+//=======================================================================
+// function : Save
+// purpose  :
+//=======================================================================
+TCollection_AsciiString DE_ShapeFixConfigurationNode::Save() const
+{
+  TCollection_AsciiString aResult;
+  TCollection_AsciiString aScope = THE_CONFIGURATION_SCOPE() + "." + GetFormat() + "." + GetVendor() + ".healing";
+
+  aResult += "!\n";
+  aResult += "!Shape healing parameters:\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the maximum allowable tolerance\n";
+  aResult += "!Default value: 1.e-6. Available values: any real positive (non null) value\n";
+  aResult += aScope + "tolerance3d :\t " + HealingParameters.Tolerance3d + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the maximum allowable tolerance\n";
+  aResult += "!Default value: 1.0. Available values: any real positive (non null) value\n";
+  aResult += aScope + "max.tolerance3d :\t " + HealingParameters.MaxTolerance3d + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the minimum allowable tolerance\n";
+  aResult += "!Default value: 1.e-7. Available values: any real positive (non null) value\n";
+  aResult += aScope + "min.tolerance3d :\t " + HealingParameters.MinTolerance3d + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying fixes of ShapeFix_Shell for ShapeFix_Shape\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "free.shell :\t " + (int)HealingParameters.FixFreeShellMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying fixes of ShapeFix_Face for ShapeFix_Shape\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "free.face :\t " + (int)HealingParameters.FixFreeFaceMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying fixes of ShapeFix_Wire for ShapeFix_Shape\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "free.wire :\t " + (int)HealingParameters.FixFreeWireMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying ShapeFix::SameParameter after all fixes\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "same.parameter :\t " + (int)HealingParameters.FixSameParameterMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying fixes of ShapeFix_Solid\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "solid :\t " + (int)HealingParameters.FixSolidMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying analysis and fixes of orientation of shells in the solid\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "shell.orientation :\t " + (int)HealingParameters.FixShellOrientationMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for creation of solids. If operation is executed then solids are created from open shells ";
+  aResult += "else solids are created from closed shells only\n";
+  aResult += "!Default value: \"NotFix\"(0). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "create.open.solid :\t " + (int)HealingParameters.CreateOpenSolidMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying fixes of ShapeFix_Shell for ShapeFix_Solid\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "shell :\t " + (int)HealingParameters.FixShellMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying analysis and fixes of orientation of faces in the shell\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "face.orientation :\t " + (int)HealingParameters.FixFaceOrientationMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying fixes of ShapeFix_Face\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "face :\t " + (int)HealingParameters.FixFaceMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying fixes of ShapeFix_Wire\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "wire :\t " + (int)HealingParameters.FixWireMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying a fix for the orientation of faces in the shell\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "orientation :\t " + (int)HealingParameters.FixOrientationMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the add natural bound mode. If operation is executed then natural boundary is added on faces that miss them\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "add.natural.bound :\t " + (int)HealingParameters.FixAddNaturalBoundMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the fix missing seam mode (tries to insert seam is missed)\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "missing.seam :\t " + (int)HealingParameters.FixMissingSeamMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the fix small area wire mode (drops small wires)\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "small.area.wire :\t " + (int)HealingParameters.FixSmallAreaWireMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the remove face with small area (drops faces with small outer wires)\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "remove.small.area.face :\t " + (int)HealingParameters.RemoveSmallAreaFaceMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the fix intersecting wires mode in ShapeFix_Face\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "intersecting.wires :\t " + (int)HealingParameters.FixIntersectingWiresMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the fix loop wires mode in ShapeFix_Face\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "loop.wires :\t " + (int)HealingParameters.FixLoopWiresMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the fix split face mode in ShapeFix_Face\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "split.face :\t " + (int)HealingParameters.FixSplitFaceMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the auto-correct precision mode in ShapeFix_Face\n";
+  aResult += "!Default value: \"Fix\"(1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "auto.correct.precision :\t " + (int)HealingParameters.AutoCorrectPrecisionMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to modify topology of the wire during fixing (adding/removing edges etc.)\n";
+  aResult += "!Default value: \"NotFix\"(0). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "modify.topology :\t " + (int)HealingParameters.ModifyTopologyMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to modify geometry of the edges and vertices\n";
+  aResult += "!Default value: \"Fix\"(1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "modify.geometry :\t " + (int)HealingParameters.ModifyGeometryMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to defines whether the wire is to be closed (by calling methods like FixDegenerated() ";
+  aResult += "!and FixConnected() for lastand first edges\n";
+  aResult += "!Default value: \"Fix\"(1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "closed.wire :\t " + (int)HealingParameters.ClosedWireMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to defines the 2d representation of the wire is preferable over 3d one ";
+  aResult += "(in the case of ambiguity in FixEdgeCurves)\n";
+  aResult += "!and FixConnected() for lastand first edges\n";
+  aResult += "!Default value: \"Fix\"(1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "preference.pcurve :\t " + (int)HealingParameters.PreferencePCurveMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to reorder edges in the wire\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "reorder.edges :\t " + (int)HealingParameters.FixReorderMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to remove small edges\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "remove.small.edges :\t " + (int)HealingParameters.FixSmallMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix connecting edges in the wire\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "connected.edges :\t " + (int)HealingParameters.FixConnectedMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix edges (3Dcurves and 2D curves)\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "edge.curves :\t " + (int)HealingParameters.FixEdgeCurvesMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for add degenerated edges\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "add.degenerated.edges :\t " + (int)HealingParameters.FixDegeneratedMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for add lacking edges\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "add.lacking.edges :\t " + (int)HealingParameters.FixLackingMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix selfintersection edges\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "selfintersection :\t " + (int)HealingParameters.FixSelfIntersectionMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to remove loop\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "remove.loop :\t " + (int)HealingParameters.RemoveLoopMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to fix edge if pcurve is directed opposite to 3d curve\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "reversed2d :\t " + (int)HealingParameters.FixReversed2dMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to remove the pcurve(s) of the edge if it does not match the vertices\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "remove.pcurve :\t " + (int)HealingParameters.FixRemovePCurveMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to remove 3d curve of the edge if it does not match the vertices\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "remove.curve3d :\t " + (int)HealingParameters.FixRemoveCurve3dMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to add pcurve(s) of the edge if missing (by projecting 3d curve)\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "add.pcurve :\t " + (int)HealingParameters.FixAddPCurveMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to build 3d curve of the edge if missing\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "add.curve3d :\t " + (int)HealingParameters.FixAddCurve3dMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to correct order of pcurves in the seam edge depends on its orientation\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "correct.order.in.seam :\t " + (int)HealingParameters.FixSeamMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode allowed to shifts wrong 2D curves back, ensuring that the 2D curves of the edges in the wire are connected\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "shifted :\t " + (int)HealingParameters.FixShiftedMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying EdgeSameParameter\n";
+  aResult += "!Default value: \"NotFix\"(0). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "edge.same.parameter :\t " + (int)HealingParameters.FixEdgeSameParameterMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix notched edges\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "notched.edges :\t " + (int)HealingParameters.FixNotchedEdgesMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix tail in wire\n";
+  aResult += "!Default value: \"NotFix\"(0). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "tail :\t " + (int)HealingParameters.FixTailMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for max angle of the tails\n";
+  aResult += "!Default value: \"NotFix\"(0). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "max.tail.angle :\t " + (int)HealingParameters.MaxTailAngle + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for max tail width\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "max.tail.width :\t " + (int)HealingParameters.MaxTailWidth + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix selfintersecting of edge\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "selfintersecting.edge :\t " + (int)HealingParameters.FixSelfIntersectingEdgeMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix intersecting edges\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "intersecting.edges :\t " + (int)HealingParameters.FixIntersectingEdgesMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for fix non adjacent intersecting edges\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "nonadjacent.intersecting.edges :\t " + (int)HealingParameters.FixNonAdjacentIntersectingEdgesMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for applying ShapeFix::FixVertexPosition before all fixes\n";
+  aResult += "!Default value: \"NotFix\"(0). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "vertex.position :\t " + (int)HealingParameters.FixVertexPositionMode + "\n";
+  aResult += "!\n";
+
+  aResult += "!\n";
+  aResult += "!Defines the mode for increases the tolerances of the edge vertices to comprise ";
+  aResult += "!the ends of 3d curve and pcurve on the given face (first method) or all pcurves stored in an edge (second one)\n";
+  aResult += "!Default value: \"FixOrNot\"(-1). Available values: \"FixOrNot\"(-1), \"NotFix\"(0), \"Fix\"(1)\n";
+  aResult += aScope + "vertex.tolerance :\t " + (int)HealingParameters.FixVertexToleranceMode + "\n";
+  aResult += "!\n";
+
+  return aResult;
+}

src/DE/DE_ShapeFixConfigurationNode.hxx

@@ -0,0 +1,51 @@
+// Copyright (c) 2024 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#ifndef _DE_ShapeFixConfigurationNode_HeaderFile
+#define _DE_ShapeFixConfigurationNode_HeaderFile
+
+#include <DE_ConfigurationNode.hxx>
+#include <DE_ShapeFixParameters.hxx>
+#include <TColStd_ListOfAsciiString.hxx>
+
+class DE_ConfigurationContext;
+
+//! Base class to work with shape healing parameters for child classes.
+class DE_ShapeFixConfigurationNode : public DE_ConfigurationNode
+{
+  DEFINE_STANDARD_RTTIEXT(DE_ShapeFixConfigurationNode, DE_ConfigurationNode)
+public:
+
+  //! Initializes all field by default
+  Standard_EXPORT DE_ShapeFixConfigurationNode();
+
+  //! Copies values of all fields
+  //! @param[in] theConfigurationNode object to copy
+  Standard_EXPORT DE_ShapeFixConfigurationNode(const Handle(DE_ShapeFixConfigurationNode)& theConfigurationNode);
+
+  //! Updates values according the resource
+  //! @param[in] theResource input resource to use
+  //! @return True if Load was successful
+  Standard_EXPORT virtual bool Load(const Handle(DE_ConfigurationContext)& theResource) Standard_OVERRIDE;
+
+  //! Writes configuration to the string
+  //! @return result resource string
+  Standard_EXPORT virtual TCollection_AsciiString Save() const Standard_OVERRIDE;
+
+public:
+
+  DE_ShapeFixParameters HealingParameters; //!< Shape healing parameters
+
+};
+
+#endif // _DE_ShapeFixConfigurationNode_HeaderFile

src/DE/DE_ShapeFixParameters.hxx

@@ -0,0 +1,82 @@
+// Copyright (c) 2024 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#ifndef _DE_ShapeFixParameters_HeaderFile
+#define _DE_ShapeFixParameters_HeaderFile
+
+//! Struct for shape healing parameters storage
+struct DE_ShapeFixParameters
+{
+  //! Enum, classifying a type of value for parameters
+  enum class FixMode : char
+  {
+    FixOrNot = -1, //!< Procedure will be executed or not (depending on the situation)
+    NotFix = 0,    //!< Procedure will be executed
+    Fix = 1        //!< Procedure will be executed anyway
+  };
+
+  double Tolerance3d = 1.e-6;
+  double MaxTolerance3d = 1.0;
+  double MinTolerance3d = 1.e-7;
+  FixMode FixFreeShellMode = FixMode::FixOrNot;
+  FixMode FixFreeFaceMode = FixMode::FixOrNot;
+  FixMode FixFreeWireMode = FixMode::FixOrNot;
+  FixMode FixSameParameterMode = FixMode::FixOrNot;
+  FixMode FixSolidMode = FixMode::FixOrNot;
+  FixMode FixShellOrientationMode = FixMode::FixOrNot;
+  FixMode CreateOpenSolidMode = FixMode::NotFix;
+  FixMode FixShellMode = FixMode::FixOrNot;
+  FixMode FixFaceOrientationMode = FixMode::FixOrNot;
+  FixMode FixFaceMode = FixMode::FixOrNot;
+  FixMode FixWireMode = FixMode::FixOrNot;
+  FixMode FixOrientationMode = FixMode::FixOrNot;
+  FixMode FixAddNaturalBoundMode = FixMode::FixOrNot;
+  FixMode FixMissingSeamMode = FixMode::FixOrNot;
+  FixMode FixSmallAreaWireMode = FixMode::FixOrNot;
+  FixMode RemoveSmallAreaFaceMode = FixMode::FixOrNot;
+  FixMode FixIntersectingWiresMode = FixMode::FixOrNot;
+  FixMode FixLoopWiresMode = FixMode::FixOrNot;
+  FixMode FixSplitFaceMode = FixMode::FixOrNot;
+  FixMode AutoCorrectPrecisionMode = FixMode::FixOrNot;
+  FixMode ModifyTopologyMode = FixMode::NotFix;
+  FixMode ModifyGeometryMode = FixMode::Fix;
+  FixMode ClosedWireMode = FixMode::Fix;
+  FixMode PreferencePCurveMode = FixMode::Fix;
+  FixMode FixReorderMode = FixMode::FixOrNot;
+  FixMode FixSmallMode = FixMode::FixOrNot;
+  FixMode FixConnectedMode = FixMode::FixOrNot;
+  FixMode FixEdgeCurvesMode = FixMode::FixOrNot;
+  FixMode FixDegeneratedMode = FixMode::FixOrNot;
+  FixMode FixLackingMode = FixMode::FixOrNot;
+  FixMode FixSelfIntersectionMode = FixMode::FixOrNot;
+  FixMode RemoveLoopMode = FixMode::FixOrNot;
+  FixMode FixReversed2dMode = FixMode::FixOrNot;
+  FixMode FixRemovePCurveMode = FixMode::FixOrNot;
+  FixMode FixRemoveCurve3dMode = FixMode::FixOrNot;
+  FixMode FixAddPCurveMode = FixMode::FixOrNot;
+  FixMode FixAddCurve3dMode = FixMode::FixOrNot;
+  FixMode FixSeamMode = FixMode::FixOrNot;
+  FixMode FixShiftedMode = FixMode::FixOrNot;
+  FixMode FixEdgeSameParameterMode = FixMode::NotFix;
+  FixMode FixNotchedEdgesMode = FixMode::FixOrNot;
+  FixMode FixTailMode = FixMode::NotFix;
+  FixMode MaxTailAngle = FixMode::NotFix;
+  FixMode MaxTailWidth = FixMode::FixOrNot;
+  FixMode FixSelfIntersectingEdgeMode = FixMode::FixOrNot;
+  FixMode FixIntersectingEdgesMode = FixMode::FixOrNot;
+  FixMode FixNonAdjacentIntersectingEdgesMode = FixMode::FixOrNot;
+  FixMode FixVertexPositionMode = FixMode::NotFix;
+  FixMode FixVertexToleranceMode = FixMode::FixOrNot;
+};
+
+#endif // _DE_ShapeFixParameters_HeaderFile

src/DE/FILES

@@ -5,5 +5,8 @@ DE_ConfigurationNode.hxx
 DE_PluginHolder.hxx
 DE_Provider.cxx
 DE_Provider.hxx
+DE_ShapeFixConfigurationNode.cxx
+DE_ShapeFixConfigurationNode.hxx
+DE_ShapeFixParameters.hxx
 DE_Wrapper.cxx
 DE_Wrapper.hxx

src/ShapeCustom/ShapeCustom.cxx

@@ -36,6 +36,68 @@
 
 #include <Message_ProgressScope.hxx>
 
+namespace
+{
+  //=======================================================================
+  //function : UpdateHistoryShape
+  //purpose  : Updates ShapeBuild_ReShape by the info of the given shape
+  //=======================================================================
+  bool UpdateHistoryShape (const TopoDS_Shape&               theShape,
+                           const BRepTools_Modifier&         theModifier,
+                           const Handle(ShapeBuild_ReShape)& theReShape)
+  {
+    TopoDS_Shape aResult;
+    try
+    {
+      OCC_CATCH_SIGNALS
+      aResult = theModifier.ModifiedShape (theShape);
+    }
+    catch (Standard_NoSuchObject const&)
+    {
+      // the sub shape isn't in the map
+      aResult.Nullify();
+    }
+
+    if (!aResult.IsNull() && !theShape.IsSame (aResult))
+    {
+      theReShape->Replace (theShape, aResult);
+      return true;
+    }
+
+    return false;
+  }
+
+  //=======================================================================
+  //function : UpdateHistory
+  //purpose  : Recursively updates ShapeBuild_ReShape to add information of all sub-shapes
+  //=======================================================================
+  void UpdateHistory (const TopoDS_Shape&               theShape,
+                      const BRepTools_Modifier&         theModifier,
+                      const Handle(ShapeBuild_ReShape)& theReShape)
+  {
+    for (TopoDS_Iterator theIterator (theShape, Standard_False); theIterator.More(); theIterator.Next())
+    {
+      const TopoDS_Shape& aCurrent = theIterator.Value();
+      if (UpdateHistoryShape (aCurrent, theModifier, theReShape))
+      {
+        UpdateHistory (aCurrent, theModifier, theReShape);
+      }
+    }
+  }
+
+  //=======================================================================
+  //function : UpdateShapeBuild
+  //purpose  : Recursively updates ShapeBuild_ReShape to add information of all sub-shapes
+  //=======================================================================
+  void UpdateShapeBuild (const TopoDS_Shape&               theShape,
+                         const BRepTools_Modifier&         theModifier,
+                         const Handle(ShapeBuild_ReShape)& theReShape)
+  {
+    UpdateHistoryShape (theShape, theModifier, theReShape);
+    UpdateHistory      (theShape, theModifier, theReShape);
+  }
+}
+
 //=======================================================================
 //function : ApplyModifier
 //purpose  : static
@@ -58,25 +120,35 @@ TopoDS_Shape ShapeCustom::ApplyModifier (const TopoDS_Shape &S,
     BRep_Builder B;
     B.MakeCompound ( C );
 
+    SF.Location (TopLoc_Location());
     Standard_Integer aShapeCount = SF.NbChildren();
     Message_ProgressScope aPS(theProgress, "Applying Modifier For Solids", aShapeCount);
-    for ( TopoDS_Iterator it(SF); it.More() && aPS.More(); it.Next()) {
-      TopoDS_Shape shape = it.Value();
-      TopLoc_Location L = shape.Location(), nullLoc;
-      shape.Location ( nullLoc );
-      TopoDS_Shape res;
+    for (TopoDS_Iterator it(SF); it.More() && aPS.More(); it.Next())
+    {
       Message_ProgressRange aRange = aPS.Next();
-      if ( context.IsBound ( shape ) )
-        res = context.Find ( shape ).Oriented ( shape.Orientation() );
-      else
-        res = ApplyModifier ( shape, M, context ,MD, aRange);
+    
+      TopoDS_Shape shape       = it.Value();
+      TopoDS_Shape aShapeNoLoc = it.Value();
+      aShapeNoLoc.Location (TopLoc_Location());
 
-      if ( ! res.IsSame ( shape ) ) {
-        context.Bind ( shape, res );
+      TopoDS_Shape res;
+      if (context.Find (aShapeNoLoc, res))
+      {
+        res.Orientation (shape.Orientation());
+        res.Location    (shape.Location(), Standard_False);
+      }
+      else
+      {
+        res = ApplyModifier (shape, M, context, MD, aRange, aReShape);
+      }
+
+      if ( !res.IsSame (shape) )
+      {
+        context.Bind (aShapeNoLoc, res.Located (TopLoc_Location()));
         locModified = Standard_True;
       }
-      res.Location ( L, Standard_False );
-      B.Add ( C, res );
+
+      B.Add (C, res);
     }
 
     if ( !aPS.More() )
@@ -85,9 +157,16 @@ TopoDS_Shape ShapeCustom::ApplyModifier (const TopoDS_Shape &S,
       return S;
     }
 
-    if ( ! locModified ) return S;
+    if ( !locModified )
+    {
+      return S;
+    }
+
     context.Bind ( SF, C );
-    return C.Oriented ( S.Orientation() );
+
+    C.Orientation (S.Orientation());
+    C.Location    (S.Location(), Standard_False);
+    return C;
   }
 
   Message_ProgressScope aPS(theProgress, "Modify the Shape", 1);
@@ -98,26 +177,7 @@ TopoDS_Shape ShapeCustom::ApplyModifier (const TopoDS_Shape &S,
   if ( !aPS.More() || !MD.IsDone() ) return S;
   if ( !aReShape.IsNull() )
   {
-    for(TopoDS_Iterator theIterator(SF,Standard_False);theIterator.More();theIterator.Next())
-    {
-      const TopoDS_Shape & current = theIterator.Value();
-      TopoDS_Shape result;
-      try
-      {
-        OCC_CATCH_SIGNALS
-        result = MD.ModifiedShape( current );
-      }
-      catch (Standard_NoSuchObject const&)
-      {
-        // the sub shape isn't in the map
-        result.Nullify();
-      }
-
-      if (!result.IsNull() && !current.IsSame(result))
-      {
-        aReShape->Replace(current, result);
-      }
-    }
+    UpdateShapeBuild ( SF, MD, aReShape );
   }
 
   return MD.ModifiedShape(SF).Oriented(S.Orientation());

src/XCAFDoc/XCAFDoc_LayerTool.cxx

@@ -241,11 +241,9 @@ void XCAFDoc_LayerTool::SetLayer(const TDF_Label& L,
   Handle(XCAFDoc_GraphNode) FGNode;
   Handle(XCAFDoc_GraphNode) ChGNode;
   if (! LayerL.FindAttribute( XCAFDoc::LayerRefGUID(), FGNode) ) {
-    FGNode = new XCAFDoc_GraphNode;
     FGNode = XCAFDoc_GraphNode::Set(LayerL);
   }
   if (! L.FindAttribute( XCAFDoc::LayerRefGUID(), ChGNode) ) {
-    ChGNode = new XCAFDoc_GraphNode;
     ChGNode = XCAFDoc_GraphNode::Set(L);
   }
   FGNode->SetGraphID( XCAFDoc::LayerRefGUID() );

tests/bugs/modalg_8/bug33648

@@ -0,0 +1,26 @@
+puts "==================================================="
+puts "0033648: Modeling Algorithms - Bad partition result"
+puts "==================================================="
+puts ""
+
+pload MODELING
+restore [locate_data_file bug33648_1.brep] s1
+restore [locate_data_file bug33648_2.brep] s2
+
+baddobjects s1 s2
+bfillds
+bbuild result
+
+checkprops result -s 87.2813
+checknbshapes result -vertex 58 -edge 97 -wire 44 -face 44 -shell 4 -solid 4 -compsolid 0 -compound 2 -shape 253
+
+set expected_MaxTolerance 0.05
+regexp {Tolerance +MAX=([-0-9.+eE]+)} [tolerance result] full MaxTolerance
+if { $MaxTolerance > $expected_MaxTolerance } {
+	puts "Error : too big tolerance for the shape (should be less than $expected_MaxTolerance, now $MaxTolerance)"
+}
+
+vinit
+vdisplay result
+vfit
+checkview -screenshot -3d -path ${imagedir}/${test_image}.png